Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Galloping alternator - Piper Warrior

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
alec(at)alecmyers.com
Guest





PostPosted: Wed Jul 22, 2026 5:31 am    Post subject: Galloping alternator - Piper Warrior Reply with quote

Hi Bob et al

I have been reading Aeroelectric resources on the cause of the galloping alternator issue, and how to fix. I just want to verify that the circuit where a too-high resistance will cause an oscialltion is this one (yellow):

And that a differential diagnosis is that the problem goes away on temporary connection of the red wire - have I understood that correctly?


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



Screenshot_2026-07-22_at_09.24.57.png
 Description:
 Filesize:  330.89 KB
 Viewed:  633 Time(s)

Screenshot_2026-07-22_at_09.24.57.png


Back to top
alec(at)alecmyers.com
Guest





PostPosted: Wed Jul 22, 2026 10:03 am    Post subject: Galloping alternator - Piper Warrior Reply with quote

Another question for Bob, about the galloping alternator issue.
The aircraft alternator field coils have (typically) resistance of 4 ohms and inductance 0.25 henrys. That gives a time constant of 62 milliseconds, or equivalently a 90 degree phase shift at 2.55Hz. Values are of course approximate but order-of magnitude is useful.

If the oscillation is about 3 Hz (from memory) there’s a second parasitic pole at about 3.5Hz. This means the phase shift at 3Hz has hit 180° below the frequency at which the magnitude of the loop gain is below 1. Hence the oscillation.

I understand that a field circuit resistance of 200 milliohms is likely to be troublesome.

An RC circuit with a R value of 200 milliohms needs a C value of 0.225 Farads. Which is enormous. So - the question - is it the chemistry in the aircraft battery that’s acting as a capacitor with that sort of value?


On Jul 22, 2026, at 09:30, Alec Myers <alec(at)alecmyers.com> wrote:

Hi Bob et al

I have been reading Aeroelectric resources on the cause of the galloping alternator issue, and how to fix. I just want to verify that the circuit where a too-high resistance will cause an oscialltion is this one (yellow):

<Screenshot 2026-07-22 at 09.24.57.png>
And that a differential diagnosis is that the problem goes away on temporary connection of the red wire - have I understood that correctly?


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group