|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
art(at)zemon.name Guest
|
Posted: Sun Aug 04, 2019 5:25 am Post subject: Handheld Comm Interference In Flight |
|
|
During my flight home from AirVenture, I decided to test my handheld radio in flight. There was so much hum that it was unusable. This was a low-ish frequency hum, not pulsing. Definitely not what I have heard in the past as a higher frequency "alternator whine."
Here are the details:
I have the Yaesu Vertext FTA 550 handheld VHF radio. It works great on the ground.
I plugged in the Yaesu headset adapter into the radio. I plugged my headset into the adapter.Â
I have a second comm antenna on the airplane but, since the second comm radio is not installed, I have the coax with BNC connector readily available under the front of the instrument panel. I connected the second comm antenna to the handheld. The two comm antennas are mounted on top of the airplane, about 3 feet apart.
I tuned to a nearby ASOS. The audio was buried under such a loud hum that I could barely hear it. I tried a different ASOS; same result. I turned off the comm radio in my panel and the hum was still present. I did not try transmitting.
The in-panel comm radio (a VAL COM 2000) does not have any hum.
Other devices in the airplane which were turned on at the time:
- Lycoming engine with primary and backup B&C alternators with B&C voltage regulators. Ignition is from two newly rebuilt magnetos.
- PS Engineering audio panel.
- VAL NAV 2000 VOR/ILS/GS receiver.
- AeroLEDS landing lights on wig-wagÂ
- AeroLEDS Pulsar NSP wingtip lights with strobes on but nav/position lights off.
- MGL iEFIS system
- iPad and smartphone
What ideas do you have? Carrying a handheld radio for backup communication is kind of pointless if I can't communicate with it.
  -- Art Z.
--
https://CheerfulCurmudgeon.com/Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
jmackenzie52(at)outlook.c Guest
|
Posted: Sun Aug 04, 2019 5:43 am Post subject: Handheld Comm Interference In Flight |
|
|
Please remove me from email list!
From: owner-aeroelectric-list-server(at)matronics.com <owner-aeroelectric-list-server(at)matronics.com> on behalf of Art Zemon <art(at)zemon.name>
Sent: Sunday, August 4, 2019 7:23 AM
To: aeroelectric-list(at)matronics.com <aeroelectric-list(at)matronics.com>
Subject: Handheld Comm Interference In Flight
During my flight home from AirVenture, I decided to test my handheld radio in flight. There was so much hum that it was unusable. This was a low-ish frequency hum, not pulsing. Definitely not what I have heard in the past as a higher frequency "alternator whine."
Here are the details:
I have the Yaesu Vertext FTA 550 handheld VHF radio. It works great on the ground.
I plugged in the Yaesu headset adapter into the radio. I plugged my headset into the adapter.
I have a second comm antenna on the airplane but, since the second comm radio is not installed, I have the coax with BNC connector readily available under the front of the instrument panel. I connected the second comm antenna to the handheld. The two comm antennas are mounted on top of the airplane, about 3 feet apart.
I tuned to a nearby ASOS. The audio was buried under such a loud hum that I could barely hear it. I tried a different ASOS; same result. I turned off the comm radio in my panel and the hum was still present. I did not try transmitting.
The in-panel comm radio (a VAL COM 2000) does not have any hum.
Other devices in the airplane which were turned on at the time:
- Lycoming engine with primary and backup B&C alternators with B&C voltage regulators. Ignition is from two newly rebuilt magnetos.
- PS Engineering audio panel.
- VAL NAV 2000 VOR/ILS/GS receiver.
- AeroLEDS landing lights on wig-wag
- AeroLEDS Pulsar NSP wingtip lights with strobes on but nav/position lights off.
- MGL iEFIS system
- iPad and smartphone
What ideas do you have? Carrying a handheld radio for backup communication is kind of pointless if I can't communicate with it.
-- Art Z.
--
https://CheerfulCurmudgeon.com/ Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
ceengland7(at)gmail.com Guest
|
Posted: Sun Aug 04, 2019 5:54 am Post subject: Handheld Comm Interference In Flight |
|
|
On Sun, Aug 4, 2019 at 8:30 AM Art Zemon <art(at)zemon.name (art(at)zemon.name)> wrote:
Quote: | During my flight home from AirVenture, I decided to test my handheld radio in flight. There was so much hum that it was unusable. This was a low-ish frequency hum, not pulsing. Definitely not what I have heard in the past as a higher frequency "alternator whine."
Here are the details:
I have the Yaesu Vertext FTA 550 handheld VHF radio. It works great on the ground.
I plugged in the Yaesu headset adapter into the radio. I plugged my headset into the adapter.Â
I have a second comm antenna on the airplane but, since the second comm radio is not installed, I have the coax with BNC connector readily available under the front of the instrument panel. I connected the second comm antenna to the handheld. The two comm antennas are mounted on top of the airplane, about 3 feet apart.
I tuned to a nearby ASOS. The audio was buried under such a loud hum that I could barely hear it. I tried a different ASOS; same result. I turned off the comm radio in my panel and the hum was still present. I did not try transmitting.
The in-panel comm radio (a VAL COM 2000) does not have any hum.
Other devices in the airplane which were turned on at the time:
- Lycoming engine with primary and backup B&C alternators with B&C voltage regulators. Ignition is from two newly rebuilt magnetos.
- PS Engineering audio panel.
- VAL NAV 2000 VOR/ILS/GS receiver.
- AeroLEDS landing lights on wig-wagÂ
- AeroLEDS Pulsar NSP wingtip lights with strobes on but nav/position lights off.
- MGL iEFIS system
- iPad and smartphone
What ideas do you have? Carrying a handheld radio for backup communication is kind of pointless if I can't communicate with it.
  -- Art Z.
| Hmmm (pardon the pun).
More details?
Was the handheld powered from ship's power or its internal batteries? Â
Did you try it with the handheld's rubber ducky antenna?
Does 'on the ground' mean without the engine running & everything powered off except the handheld?
Have you tested sitting on the ground with engine running and normal stuff powered up as typical for flight?
If you get the same noise in the above condition, I'd try shutting stuff down one at a time until everything's off or until the hum stops.
Charlie
Â
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
chaskuss(at)yahoo.com Guest
|
Posted: Sun Aug 04, 2019 6:00 am Post subject: Handheld Comm Interference In Flight |
|
|
Art,
Do you get the hum if you use the Rubber Ducky antenna?
Charlie
On Sunday, August 4, 2019, 9:39:49 AM EDT, Art Zemon <art(at)zemon.name> wrote:
During my flight home from AirVenture, I decided to test my handheld radio in flight. There was so much hum that it was unusable. This was a low-ish frequency hum, not pulsing. Definitely not what I have heard in the past as a higher frequency "alternator whine."
Here are the details:
I have the Yaesu Vertext FTA 550 handheld VHF radio. It works great on the ground.
I plugged in the Yaesu headset adapter into the radio. I plugged my headset into the adapter.
I have a second comm antenna on the airplane but, since the second comm radio is not installed, I have the coax with BNC connector readily available under the front of the instrument panel. I connected the second comm antenna to the handheld. The two comm antennas are mounted on top of the airplane, about 3 feet apart.
I tuned to a nearby ASOS. The audio was buried under such a loud hum that I could barely hear it. I tried a different ASOS; same result. I turned off the comm radio in my panel and the hum was still present. I did not try transmitting.
The in-panel comm radio (a VAL COM 2000) does not have any hum.
Other devices in the airplane which were turned on at the time:
- Lycoming engine with primary and backup B&C alternators with B&C voltage regulators. Ignition is from two newly rebuilt magnetos.
- PS Engineering audio panel.
- VAL NAV 2000 VOR/ILS/GS receiver.
- AeroLEDS landing lights on wig-wag
- AeroLEDS Pulsar NSP wingtip lights with strobes on but nav/position lights off.
- MGL iEFIS system
- iPad and smartphone
What ideas do you have? Carrying a handheld radio for backup communication is kind of pointless if I can't communicate with it.
-- Art Z.
--
https://CheerfulCurmudgeon.com/Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
Kellym
Joined: 10 Jan 2006 Posts: 1704 Location: Sun Lakes AZ
|
Posted: Sun Aug 04, 2019 6:05 am Post subject: Handheld Comm Interference In Flight |
|
|
All good suggestions. I'll add turn off your phone and Ipad, remove any
power adapters for them from 12 volt sockets. They are all known RF
generators.
On 8/4/2019 6:46 AM, Charlie England wrote:
Quote: |
I plugged in the Yaesu headset adapter into the radio. I plugged my
headset into the adapter.
The in-panel comm radio (a VAL COM 2000) does not have any hum.
Other devices in the airplane which were turned on at the time:
* Lycoming engine with primary and backup B&C alternators with B&C
voltage regulators. Ignition is from two newly rebuilt magnetos.
* PS Engineering audio panel.
* VAL NAV 2000 VOR/ILS/GS receiver.
* AeroLEDS landing lights on wig-wag
* AeroLEDS Pulsar NSP wingtip lights with strobes on but
nav/position lights off.
* MGL iEFIS system
* iPad and smartphone
What ideas do you have? Carrying a handheld radio for backup
communication is kind of pointless if I can't communicate with it.
  -- Art Z.
Hmmm (pardon the pun).
More details?
Was the handheld powered from ship's power or its internal batteries?
Did you try it with the handheld's rubber ducky antenna?
Does 'on the ground' mean without the engine running & everything
powered off except the handheld?
Have you tested sitting on the ground with engine running and normal
stuff powered up as typical for flight?
If you get the same noise in the above condition, I'd try shutting stuff
down one at a time until everything's off or until the hum stops.
Charlie
|
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________ Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD |
|
Back to top |
|
|
jmackenzie52(at)outlook.c Guest
|
Posted: Sun Aug 04, 2019 10:16 am Post subject: Handheld Comm Interference In Flight |
|
|
Please remove my email from the list.
Thanks
From: owner-aeroelectric-list-server(at)matronics.com <owner-aeroelectric-list-server(at)matronics.com> on behalf of Kelly McMullen <kellym(at)aviating.com>
Sent: Sunday, August 4, 2019 8:03 AM
To: aeroelectric-list(at)matronics.com <aeroelectric-list(at)matronics.com>
Subject: Re: Handheld Comm Interference In Flight
--> AeroElectric-List message posted by: Kelly McMullen <kellym(at)aviating.com>
All good suggestions. I'll add turn off your phone and Ipad, remove any
power adapters for them from 12 volt sockets. They are all known RF
generators.
On 8/4/2019 6:46 AM, Charlie England wrote:
>
>
>
> I plugged in the Yaesu headset adapter into the radio. I plugged my
> headset into the adapter.
>
>
> The in-panel comm radio (a VAL COM 2000) does not have any hum.
>
> Other devices in the airplane which were turned on at the time:
>
> * Lycoming engine with primary and backup B&C alternators with B&C
> voltage regulators. Ignition is from two newly rebuilt magnetos.
> * PS Engineering audio panel.
> * VAL NAV 2000 VOR/ILS/GS receiver.
> * AeroLEDS landing lights on wig-wag
> * AeroLEDS Pulsar NSP wingtip lights with strobes on but
> nav/position lights off.
> * MGL iEFIS system
> * iPad and smartphone
>
> What ideas do you have? Carrying a handheld radio for backup
> communication is kind of pointless if I can't communicate with it.
>
> -- Art Z.
>
> Hmmm (pardon the pun).
> More details?
> Was the handheld powered from ship's power or its internal batteries?
> Did you try it with the handheld's rubber ducky antenna?
> Does 'on the ground' mean without the engine running & everything
> powered off except the handheld?
> Have you tested sitting on the ground with engine running and normal
> stuff powered up as typical for flight?
> If you get the same noise in the above condition, I'd try shutting stuff
> down one at a time until everything's off or until the hum stops.
>
> Charlie
>
===========
ric-List Email Forum -
Electric-List">http://www.matronics.com/Navigator?AeroElectric-List
===========
p; - MATRONICS WEB FORUMS -
ums.matronics.com
===========
p; - NEW MATRONICS LIST WIKI -
matronics.com
===========
p; - List Contribution Web Site -
p; -Matt Dralle, List Admin.
http://www.matronics.com/contribution
===========
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
jmackenzie52(at)outlook.c Guest
|
Posted: Sun Aug 04, 2019 10:16 am Post subject: Handheld Comm Interference In Flight |
|
|
Please remove my email from the list.
Thanks
From: owner-aeroelectric-list-server(at)matronics.com <owner-aeroelectric-list-server(at)matronics.com> on behalf of Charles Kuss <chaskuss(at)yahoo.com>
Sent: Sunday, August 4, 2019 7:58 AM
To: aeroelectric-list(at)matronics.com <aeroelectric-list(at)matronics.com>
Subject: Re: Handheld Comm Interference In Flight
Art,
Do you get the hum if you use the Rubber Ducky antenna?
Charlie
On Sunday, August 4, 2019, 9:39:49 AM EDT, Art Zemon <art(at)zemon.name> wrote:
During my flight home from AirVenture, I decided to test my handheld radio in flight. There was so much hum that it was unusable. This was a low-ish frequency hum, not pulsing. Definitely not what I have heard in the past as a higher frequency "alternator whine."
Here are the details:
I have the Yaesu Vertext FTA 550 handheld VHF radio. It works great on the ground.
I plugged in the Yaesu headset adapter into the radio. I plugged my headset into the adapter.
I have a second comm antenna on the airplane but, since the second comm radio is not installed, I have the coax with BNC connector readily available under the front of the instrument panel. I connected the second comm antenna to the handheld. The two comm antennas are mounted on top of the airplane, about 3 feet apart.
I tuned to a nearby ASOS. The audio was buried under such a loud hum that I could barely hear it. I tried a different ASOS; same result. I turned off the comm radio in my panel and the hum was still present. I did not try transmitting.
The in-panel comm radio (a VAL COM 2000) does not have any hum.
Other devices in the airplane which were turned on at the time:
- Lycoming engine with primary and backup B&C alternators with B&C voltage regulators. Ignition is from two newly rebuilt magnetos.
- PS Engineering audio panel.
- VAL NAV 2000 VOR/ILS/GS receiver.
- AeroLEDS landing lights on wig-wag
- AeroLEDS Pulsar NSP wingtip lights with strobes on but nav/position lights off.
- MGL iEFIS system
- iPad and smartphone
What ideas do you have? Carrying a handheld radio for backup communication is kind of pointless if I can't communicate with it.
-- Art Z.
--
https://CheerfulCurmudgeon.com/ Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|