Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

3.7 pound 600 amp starting battery

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
William.P.Dube(at)noaa.go
Guest





PostPosted: Mon Feb 05, 2007 4:59 pm    Post subject: 3.7 pound 600 amp starting battery Reply with quote

Well, I said I was going to do it and we finally got the prototype built.

We just built a 600 cranking amp, 11.5 A-hr, battery that weighs just
3.7 pounds. I've been testing it in my GMC van for the past week here in
the Denver Winter. It snaps the van right over every morning without a
problem. The van cranks faster than it did with the standard lead-acid
battery.

It is smaller than the Odyssey 680 so it fit in the the same battery box
with a couple of foam blocks for spacers.
The battery has four status LEDs that tell you the cell balancing
electronics are working OK. We are using A123 Systems M1 cells with our
own custom battery management electronics. The A123 Systems cells are
proven to be the safest Li-Ion cells on the market. No problems with
fires (like laptop cells) because the chemistry they use is completely
different.

The battery can be damaged by running it completely flat (like leaving
the master on) and holding the battery below 8 volts for a long time. It
can also be damaged by charging it over 15.0 volts. It will likely still
function after such abuse, but it won't be nearly as good as it was
originally. If you don't abuse it, it should last you for many years.

I think we will be in production in about a month, maybe two.

Specs:

3.7 lbs
600 cranking amps
11.5 amp-hr
Approximate dimensions: 3" wide, 5" long, 7" tall (including terminals)
Charging voltage = 13.8 to 15.0 volts (anywhere in this range is OK)
Nominal voltage = 13.2 volts (Just a touch higher than your typical
lead-acid, so it spins the starter a touch faster.)
Cell cycle life rated at 2000 cycles (80% DOD, 90% capacity remaining)
10,000 cycles (80% DOD with 50% capacity remaining) (at)25 C
Cell specs: http://www.a123systems.com/html/products/ANR26650M1specs.pdf
Maintenance free
No heavy metals (iron-phosphate type cells)

At this time, we estimate the retail price will be $595.

We have been racing these cells in the KillaCycle for about a year, so
we know _all_ about them.
http://www.KillaCycle.com (Be sure to watch the movie clip.)

I'll put up some pictures of the prototype battery in a day or two on
the photos page.

Bill Dube'
bike(at)KillaCycle.com


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group