Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Engines?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Albert Gardner



Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ
PostPosted: Mon Sep 04, 2006 1:46 pm    Post subject: Engines? Reply with quote
[quote]I have located an IO-540-M1B5D. It has several aspects that need to be changed to make it suitable for an RV-10. It has up exhaust, rear air intake, and the dual mag setup but my plan was to get a serviceable case and crank and then put new cylinder assemblies on it. I am assuming I can then get the correct sump to move the air intake forward and maybe even a different accessory cover to allow separate mags. If the case and crank are good, this might be a pretty good deal since there is a Hartzell 3 blade included. Has anyone had any success with changing sumps and/or accessory drive covers on a similar engine?Albert GardnerYuma, AZ [b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV-9A N872RV
RV-10 N991RV
Back to top
View user's profile Send private message Send e-mail
Albert Gardner



Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ
PostPosted: Mon Sep 04, 2006 4:03 pm    Post subject: Engines? Reply with quote
Quote:
I am reposting this note because it didn’t have any end-of-line indicators when I downloaded it and was very hard to read. So here goes-again:I have located an IO-540-M1B5D. It has several aspects that need to be changed to make it suitable for an RV-10. It has up exhaust, rear air intake, and the dual magsetup but my plan was to get a serviceable case and crank and then put new cylinder assemblies on it. I am assuming I can then get the correct sump to move the airintake forward and maybe even a different accessory cover to allow separate mags. If the case and crank are good, this might be a pretty good deal since there is a Hartzell 3 blade included. Has anyone had any success with changing sumps and/or accessory drive covers on a similar engine?Albert GardnerI have located an IO-540-M1B5D. It has several aspects that need to be changed to
0
Quote:
I have located an IO-540-M1B5D. It has several aspects that need to be changed to
1[quote] [b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
RV-9A N872RV
RV-10 N991RV
Back to top
View user's profile Send private message Send e-mail
jdalton77(at)comcast.net
Guest
PostPosted: Mon Sep 04, 2006 4:34 pm    Post subject: Engines? Reply with quote
I've heard that Barrett Precision Engines has done this. They have a web site.
[quote] ---

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Deems Davis



Joined: 09 Jan 2006
Posts: 925
PostPosted: Mon Sep 04, 2006 7:40 pm    Post subject: Engines? Reply with quote
BPE has a cold air induction system for the IO-540 which replaces the
old sump and intake manifolds.

Deems

jdalton77 wrote:

[quote] I've heard that Barrett Precision Engines has done this. They have a
web site.

---

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group