Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Rotax float exchange process

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List
View previous topic :: View next topic  
Author Message
Roger Lee



Joined: 10 Jan 2006
Posts: 1464
Location: Tucson, Az.

PostPosted: Tue Mar 10, 2015 10:03 am    Post subject: Rotax float exchange process Reply with quote

Just to be clear on the float exchange process.

There are lots of orders out there pending so please be patient as only so many orders can be filled at a time.

For Kodiak (Rotax Bahamas) customers areas:

For non-certified engines (UL) In the USA, and in other regions where warranty service is administered by the ROTAX distributor Kodiak (American Samoa, Antigua And Barbuda, Argentina, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Brazil, Cayman Islands, Chile, Colombia, Costa Rica, Cuba, Diego Garcia, Dominica, Dominican Republic, Ecuador, El Salvador, French Guiana, Grenada, Guam, Guatemala, Guyana, Haiti, Honduras, Jamaica, Martinique, Mexico, Netherlands Antilles, Nicaragua, Panama, Paraguay, Peru, Puerto Rico, Saint Kitts And Nevis, Saint Lucia, Saint Pierre And Miquelon, Saint Vincent And The Grenadines, Suriname, Trinidad And Tobago, Turks And Caicos Islands, Uruguay, Venezuela, Virgin Islands)...
Customers with non-certified (UL) engines, that have affected serial numbers must contact their respective independent Service Centre, (iSC). At that time they may purchase the parts from the iSC.

When the old parts are returned and the paperwork is submitted with valid serial number, a credit will be issued back to the customer. (The iSC will require the customer to return the old floats, tagged with the engine serial number, before the customer can receive a refund.)

For customers who prefer to have the parts changed by a qualified independent Rotax Maintenance Technician, (iRMT), contact your service provider directly to make appropriate arrangements.

__________________________________________________________________________________________________________

If you don't have an engine in the serial range, but did purchase individual floats within the affected time period these can be included, but you will need to have your invoice as proof of purchase. Your distributor you purchased from may be able to help you if you did not keep the invoice.

p.s.
Just to let people know that these floats are the same, but have a dimple on the new floats. They are the same float material, but the difference is that instead of only two test performed before shipment they now get a third test and the new test is a pressure test. This process finds any floats susceptible to sinking.

Any floats that you may have with marks on them or scratches DO NOT affect the float as far as fuel absorption. Floats technically can last for the life of the engine. What could wear out is the float guide and pin from vibration and rubbing over time, but even this isn't very prevalent.


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

_________________
Roger Lee
Tucson, Az.
Rotax Instructor & Rotax IRC
Light Sport Repairman
Home 520-574-1080 TRY HOME FIRST
Cell 520-349-7056
Back to top
View user's profile Send private message Send e-mail
JacksonaFleming
Guest





PostPosted: Fri Mar 29, 2019 11:39 pm    Post subject: Re: Rotax float exchange process Reply with quote

I go far away from floating process because I really don’t like doing it anyway. But what can I do it is included in my studies and I have to learn it. You need to complete their assignment from proessaywriting review which whill helpful for the students. So today after reading this article I am very happy to express that I finally learned how to put floats and what is its priority.

- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group