Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

rear seat heat

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
cjhukill(at)cox.net
Guest





PostPosted: Tue Jun 06, 2006 7:00 pm    Post subject: rear seat heat Reply with quote

After much thought, and taking into consideration what comments I've received from fellow listers, I have decided on my cabin heat solution. I have talked to Don ( RV8 builder) at Aviacomp (503) 543-3986, whom manufactures all the heat/ vent ducting parts for Vans, as well as Cirrus, etc, etc., and he is going to modify the T duct (Van's p/n VA-175 Heat Duct Tee) which is just aft of the firewall, to include a selector valve that will allow me to direct the forward heat to go left, right or mix both. This will be a direct replacement for the non selector T valve, and will mate to the existing Vans VENT DL-102.4 flanges. This will allow me to control the left/right heat volume in the forward footwell area. In addition, Don will provide me with another selector valve, which I will install in the rear heat supply line, that will allow me to mix (divert) the aft heat to a duct for defog function This is a solution that allows me the most flexibility, with minimum weight and complexity (two additional control cables). Don will provide similar components for anyone else interested in a similar system, just give him a call.
 
Chris Hukill
Workin the tunnel


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
jesse(at)itecusa.org
Guest





PostPosted: Wed Jun 07, 2006 7:37 am    Post subject: rear seat heat Reply with quote

Did he provide any price information?
 
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
W: 352-465-4545
C: 352-427-0285


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris Hukill
Sent: Tuesday, June 06, 2006 11:02 PM
To: rv10-list(at)matronics.com
Subject: rear seat heat

 
After much thought, and taking into consideration what comments I've received from fellow listers, I have decided on my cabin heat solution. I have talked to Don ( RV8 builder) at Aviacomp (503) 543-3986, whom manufactures all the heat/ vent ducting parts for Vans, as well as Cirrus, etc, etc., and he is going to modify the T duct (Van's p/n VA-175 Heat Duct Tee) which is just aft of the firewall, to include a selector valve that will allow me to direct the forward heat to go left, right or mix both. This will be a direct replacement for the non selector T valve, and will mate to the existing Vans VENT DL-102.4 flanges. This will allow me to control the left/right heat volume in the forward footwell area. In addition, Don will provide me with another selector valve, which I will install in the rear heat supply line, that will allow me to mix (divert) the aft heat to a duct for defog function This is a solution that allows me the most flexibility, with minimum weight and complexity (two additional control cables). Don will provide similar components for anyone else interested in a similar system, just give him a call.

 

Chris Hukill

Workin the tunnel


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Vern(at)teclabsinc.com
Guest





PostPosted: Wed Jun 07, 2006 8:22 am    Post subject: rear seat heat Reply with quote

Hi,
 
Would this be a good way to get heat up to a defroster? I know there has been some discussion on using computer fans to blow air on the windscreen. I have to admit I haven’t really looked that far ahead in the plans to know what provisions are incorporated.
 
Vern Smith (wing flaps)
 
 

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris Hukill
Sent: Tuesday, June 06, 2006 8:02 PM
To: rv10-list(at)matronics.com
Subject: rear seat heat

 
After much thought, and taking into consideration what comments I've received from fellow listers, I have decided on my cabin heat solution. I have talked to Don ( RV8 builder) at Aviacomp (503) 543-3986, whom manufactures all the heat/ vent ducting parts for Vans, as well as Cirrus, etc, etc., and he is going to modify the T duct (Van's p/n VA-175 Heat Duct Tee) which is just aft of the firewall, to include a selector valve that will allow me to direct the forward heat to go left, right or mix both. This will be a direct replacement for the non selector T valve, and will mate to the existing Vans VENT DL-102.4 flanges. This will allow me to control the left/right heat volume in the forward footwell area. In addition, Don will provide me with another selector valve, which I will install in the rear heat supply line, that will allow me to mix (divert) the aft heat to a duct for defog function This is a solution that allows me the most flexibility, with minimum weight and complexity (two additional control cables). Don will provide similar components for anyone else interested in a similar system, just give him a call.

 

Chris Hukill

Workin the tunnel


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
KiloPapa



Joined: 24 May 2006
Posts: 142
Location: Pearblossom, CA

PostPosted: Sat Jun 17, 2006 8:01 pm    Post subject: Re: rear seat heat Reply with quote

Check out the Aviacomp Worldwide website at:

http://www.aviacompworldwide.com/heatboxes.html

Kevin
40494

do not archive


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group