 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
schmoboy
Joined: 26 Feb 2006
Posts: 130
|
 Posted: Fri Jun 09, 2006 10:39 am Post subject: TDT Panel? Was: finishing kit ommisions |
 |
|
Hey Tim..
Have any pictures of big Avidyne screens in your panel yet?
I sure wish I was able to get an Entegra setup without going through certified dealers.  I absolutely love those screens.
-Sean #40303 (Still closing up wings)
On Jun 9, 2006, at 9:15 AM, Tim Dawson-Townsend wrote:
| Quote: |
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Chris HukillSent: Friday, June 09, 2006 11:58 AMTo: rv10-list(at)matronics.com (rv10-list(at)matronics.com)Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
Tdawson(at)avidyne.com
Guest
|
| Posted: Fri Jun 09, 2006 10:49 am Post subject: TDT Panel? Was: finishing kit ommisions |
|
|
I’ve had a couple dummy units in for a fit check, but still need to finish some wiring to get to the point of firing up a real set. Should be soon, though . . .
TDT
40025
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Sean Stephens
Sent: Friday, June 09, 2006 2:39 PM
To: rv10-list(at)matronics.com
Subject: Re: TDT Panel? Was: finishing kit ommisions
Hey Tim..
Have any pictures of big Avidyne screens in your panel yet?
I sure wish I was able to get an Entegra setup without going through certified dealers. I absolutely love those screens.
-Sean #40303 (Still closing up wings)
On Jun 9, 2006, at 9:15 AM, Tim Dawson-Townsend wrote:
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Chris Hukill
Sent: Friday, June 09, 2006 11:58 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jjessen
Joined: 22 Apr 2006
Posts: 285
Location: OR
|
| Posted: Fri Jun 09, 2006 11:30 am Post subject: TDT Panel? Was: finishing kit ommisions |
|
|
Let's get a move on, Tim! The mob is outside your door, waiting! Wishing! Growing restless!
John J
328 Tailcone
do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Tim Dawson-Townsend
Sent: Friday, June 09, 2006 11:48 AM
To: rv10-list(at)matronics.com
Subject: RE: TDT Panel? Was: RV10-List: finishing kit ommisions
I’ve had a couple dummy units in for a fit check, but still need to finish some wiring to get to the point of firing up a real set. Should be soon, though . . .
TDT
40025
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Sean Stephens
Sent: Friday, June 09, 2006 2:39 PM
To: rv10-list(at)matronics.com
Subject: Re: TDT Panel? Was: RV10-List: finishing kit ommisions
Hey Tim..
Have any pictures of big Avidyne screens in your panel yet?
I sure wish I was able to get an Entegra setup without going through certified dealers. I absolutely love those screens.
-Sean #40303 (Still closing up wings)
On Jun 9, 2006, at 9:15 AM, Tim Dawson-Townsend wrote:
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Chris Hukill
Sent: Friday, June 09, 2006 11:58 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Tdawson(at)avidyne.com
Guest
|
| Posted: Fri Jun 09, 2006 11:47 am Post subject: TDT Panel? Was: finishing kit ommisions |
|
|
Patience must you have, if Jedi you will be!
TDT
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John Jessen
Sent: Friday, June 09, 2006 3:30 PM
To: rv10-list(at)matronics.com
Subject: RE: TDT Panel? Was: finishing kit ommisions
Let's get a move on, Tim! The mob is outside your door, waiting! Wishing! Growing restless!
John J
328 Tailcone
do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Tim Dawson-Townsend
Sent: Friday, June 09, 2006 11:48 AM
To: rv10-list(at)matronics.com
Subject: RE: TDT Panel? Was: finishing kit ommisions
I’ve had a couple dummy units in for a fit check, but still need to finish some wiring to get to the point of firing up a real set. Should be soon, though . . .
TDT
40025
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Sean Stephens
Sent: Friday, June 09, 2006 2:39 PM
To: rv10-list(at)matronics.com
Subject: Re: TDT Panel? Was: finishing kit ommisions
Hey Tim..
Have any pictures of big Avidyne screens in your panel yet?
I sure wish I was able to get an Entegra setup without going through certified dealers. I absolutely love those screens.
-Sean #40303 (Still closing up wings)
On Jun 9, 2006, at 9:15 AM, Tim Dawson-Townsend wrote:
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Chris Hukill
Sent: Friday, June 09, 2006 11:58 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jjessen
Joined: 22 Apr 2006
Posts: 285
Location: OR
|
| Posted: Fri Jun 09, 2006 12:19 pm Post subject: TDT Panel? Was: finishing kit ommisions |
|
|
Well, at least you didn't make some reference to a cricket, or was it a grasshopper....me, I'm only in it for the money.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Tim Dawson-Townsend
Sent: Friday, June 09, 2006 12:48 PM
To: rv10-list(at)matronics.com
Subject: RE: TDT Panel? Was: RV10-List: finishing kit ommisions
Patience must you have, if Jedi you will be!
TDT
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John Jessen
Sent: Friday, June 09, 2006 3:30 PM
To: rv10-list(at)matronics.com
Subject: RE: TDT Panel? Was: RV10-List: finishing kit ommisions
Let's get a move on, Tim! The mob is outside your door, waiting! Wishing! Growing restless!
John J
328 Tailcone
do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Tim Dawson-Townsend
Sent: Friday, June 09, 2006 11:48 AM
To: rv10-list(at)matronics.com
Subject: RE: TDT Panel? Was: RV10-List: finishing kit ommisions
I’ve had a couple dummy units in for a fit check, but still need to finish some wiring to get to the point of firing up a real set. Should be soon, though . . .
TDT
40025
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Sean Stephens
Sent: Friday, June 09, 2006 2:39 PM
To: rv10-list(at)matronics.com
Subject: Re: TDT Panel? Was: RV10-List: finishing kit ommisions
Hey Tim..
Have any pictures of big Avidyne screens in your panel yet?
I sure wish I was able to get an Entegra setup without going through certified dealers. I absolutely love those screens.
-Sean #40303 (Still closing up wings)
On Jun 9, 2006, at 9:15 AM, Tim Dawson-Townsend wrote:
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Chris Hukill
Sent: Friday, June 09, 2006 11:58 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Rick S.
Joined: 12 Feb 2006
Posts: 347
Location: Las Vegas
|
| Posted: Fri Jun 09, 2006 1:20 pm Post subject: TDT Panel? Was: finishing kit ommisions |
|
|
"Patience must you have, if Jedi you will be!"<?XML:NAMESPACE PREFIX = O />
LOL.... Spoken like a true electronic wizard...aka...Geek
do not archive
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Rick S.
RV-10
40185 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
