|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
rv8ch
Joined: 10 Jan 2006 Posts: 250 Location: Switzerland
|
Posted: Fri Jan 13, 2006 8:27 am Post subject: alternator b-lead bundled with engine computer wiring |
|
|
Hi Listers,
I'm trying to finalize my firewall penetrations,
and one convenient way would be to have one
"towel bar" type hole in the firewall with all
my wires. This would include the fat wire from
the alternator B-lead going back to the batteries
in the rear baggage area.
Do you expect any problems if I have all these
wires, including the wires from my engine computer
to my spark plug coils, fuel injector solenoids,
various crank position sensors, electric prop
controller, and various pressure transducers?
Many thanks for your advice!
--
Mickey Coggins
http://www.rv8.ch/
#82007 finishing
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________ Mickey Coggins
http://www.rv8.ch/ |
|
Back to top |
|
|
lhelming(at)sigecom.net Guest
|
Posted: Fri Jan 13, 2006 10:52 am Post subject: alternator b-lead bundled with engine computer wiring |
|
|
That is how I did mine. Everything goes through one hole along with some
push pull cables. Just like Bob suggests. Minimize the number of FW
penetrations. I have the ACS2002 engine monitor with lots of wires. No
problems.
Indiana Larry, RV7 Tip Up SunSeeker 78 hours
---
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
N1deltawhiskey(at)comcast Guest
|
Posted: Fri Jan 13, 2006 11:32 am Post subject: alternator b-lead bundled with engine computer wiring |
|
|
Mickey,
Don't understand why you are running the B-lead to the baggage area
batteries. How do you get power to the panel by running a lead from the
batteries to the panel/firewall area? If so, why not connect the B-lead to
that end of the buss?
Doug Windhorn
---
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|