nulrich(at)technq.com
Guest
|
 Posted: Wed Apr 19, 2006 7:26 pm Post subject: No Title |
 |
|
Thanks for the thoughts, but I'm afraid the GMA 347 is different from the
GMA 340. There is no documented way to configure the unit so that both crew
and pax hear the same music input. From the installation manual:
"Only the pilot and copilot hear MUSIC 1. MUSIC 2 is a non-muted input heard
only by the passengers. MUSIC 1 and MUSIC 2 characteristics are not affected
by the active intercom mode."
There's nothing in the configuration instructions that shows how to change
this. And, yes, the ADF and DME inputs are useful, especially since I'm not
using either, and I'm using one for traffic alert. But they are mono.
So, back to my original question. Any way to "split" the audio from the 396
so it can feed both MUSIC 1 and MUSIC 2 without changing volume depending on
whether one or both is active?
Thanks,
Nathan
<aadamson(at)highrf.com>
But, but but... While I've not wired my audio panel yet, isn't the ADF or
DME inputs MONO only? I didn't think they provided for Stereo?
Alan
--
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
