Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

M14PEngines-List Digest: 11 Msgs - 05/19/13

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> M14PEngines-List
View previous topic :: View next topic  
Author Message
aerobiz1(at)gmail.com
Guest
PostPosted: Sun May 19, 2013 11:34 pm    Post subject: M14PEngines-List Digest: 11 Msgs - 05/19/13 Reply with quote
Wow.  I've been following this list for a while and haven't seen one posting, now 11 !

Both Henry and Ted touched upon placement of the oil temperature senders, although the question related to placement of the thermostat.
I know the CJ6 has units for both going in and coming out of the engine, but what is the current thinking as to the most appropriate place to put an oil temp sender ?
Cheers


Marty

On Mon, May 20, 2013 at 5:01 PM, M14PEngines-List Digest Server <m14pengines-list(at)matronics.com (m14pengines-list(at)matronics.com)> wrote:
Quote:
*

 =========================
   Online Versions of Today's List Digest Archive
 =========================

Today's complete M14PEngines-List Digest can also be found in either of the
two Web Links listed below.  The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation.  The .txt file includes the plain ASCII version
of the M14PEngines-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

    http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2013-05-19&Archive=M14PEngines

Text Version:

    http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2013-05-19&Archive=M14PEngines


 =======================
   EMail Version of Today's List Digest Archive
 =======================


           ----------------------------------------------------------
                           M14PEngines-List Digest Archive
                                      ---
                     Total Messages Posted Sun 05/19/13: 11
           ----------------------------------------------------------


Today's Message Index:
----------------------

     1. 10:44 AM - Oil  (HBaker)
     2. 11:21 AM - Re: Oil  (tedwaltman)
     3. 12:33 PM - Re: Oil  (HBaker)
     4. 03:45 PM - Oil temp probe  (HBaker)
     5. 03:56 PM - Re: Oil temp probe  (tedwaltman)
     6. 04:02 PM - Re: Oil temp probe  (HBaker)
     7. 04:30 PM - Fuel flow  (HBaker)
     8. 04:45 PM - Fuel system  (HBaker)
     9. 05:03 PM - Re: Fuel flow  (Ben)
    10. 05:17 PM - Re: Fuel flow  (HBaker)
    11. 05:30 PM - Re: Re: Fuel flow  (Ben)



________________________________  Message 1  _____________________________________


Time: 10:44:26 AM PST US
Subject: Oil
From: "HBaker" <henry.baker(at)hotmail.com (henry.baker(at)hotmail.com)>


Can anyone tell me where the thermostat on the oil cooler goes inlet or outlet??

Thanks Henry

--------
Currently building a Murphy Moose - any help would be appreciated.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=400950#400950


________________________________  Message 2  _____________________________________


Time: 11:21:50 AM PST US
Subject: Re: Oil
From: "tedwaltman" <tedwaltman(at)gmail.com (tedwaltman(at)gmail.com)>


Ideally have 2 measures, both inlet & outlet.

But specs assume inlet.

I see generally 20-C diff between the two.

Ted


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=400952#400952


________________________________  Message 3  _____________________________________


Time: 12:33:09 PM PST US
Subject: Re: Oil
From: "HBaker" <henry.baker(at)hotmail.com (henry.baker(at)hotmail.com)>


Thanks Ted
Maybe that's the problem with my low oil temp.

Thanks

--------
Currently building a Murphy Moose - any help would be appreciated.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=400960#400960


________________________________  Message 4  _____________________________________


Time: 03:45:23 PM PST US
Subject: Oil temp probe
From: "HBaker" <henry.baker(at)hotmail.com (henry.baker(at)hotmail.com)>


I have installed my oil temp on the bottom of my oil reservoir tank , near where
the oil runs out, is this appropriate .
Henry

--------
Currently building a Murphy Moose - any help would be appreciated.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=400964#400964


________________________________  Message 5  _____________________________________


Time: 03:56:22 PM PST US
Subject: Re: Oil temp probe
From: "tedwaltman" <tedwaltman(at)gmail.com (tedwaltman(at)gmail.com)>


That is where quite a few people put it.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=400965#400965


________________________________  Message 6  _____________________________________


Time: 04:02:29 PM PST US
Subject: Re: Oil temp probe
From: "HBaker" <henry.baker(at)hotmail.com (henry.baker(at)hotmail.com)>


Thank you Ted

--------
Currently building a Murphy Moose - any help would be appreciated.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=400966#400966


________________________________  Message 7  _____________________________________


Time: 04:30:39 PM PST US
Subject: Fuel flow
From: "HBaker" <henry.baker(at)hotmail.com (henry.baker(at)hotmail.com)>


I am redoing my fuel flow test , because I am not getting 2900 on my static  run
up , or even rolling down the runway , at 37 GPH divided by 60 seconds. should
I have 0.61 gallons per second?? Does this sound right?

Henry


--------
Currently building a Murphy Moose - any help would be appreciated.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=400968#400968


________________________________  Message 8  _____________________________________


Time: 04:45:52 PM PST US
Subject: Fuel system
From: "HBaker" <henry.baker(at)hotmail.com (henry.baker(at)hotmail.com)>


This is a picture of the fuel setup in the my moose does anyone have any suggestions?
The red block is the fuel flow sending unit. All the lines are 3/8 and
the gasolator is before that.

--------
Currently building a Murphy Moose - any help would be appreciated.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=400969#400969


Attachments:

http://forums.matronics.com//files/image_485.jpg


________________________________  Message 9  _____________________________________


Time: 05:03:25 PM PST US
From: "Ben" <n801bh(at)netzero.com (n801bh(at)netzero.com)>
Subject: Re: Fuel flow

You are burning 37 gallons an hour.... not a minute......
do not archive


Ben Haas
N801BH
www.haaspowerair.com

--------

- The Matronics M14PEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?M14PEngines-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> M14PEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group