Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Lycoming flywheel pulley diameter

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Engines-List
View previous topic :: View next topic  
Author Message
redswing(at)mcn.org
Guest





PostPosted: Sun Apr 09, 2006 7:56 pm    Post subject: Lycoming flywheel pulley diameter Reply with quote

I think that there are two flywheel pulley diameters for the 4 cyl Lyc, does anyone know what they are?
TIA,
Red Hamilton


- The Matronics Engines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Engines-List
Back to top
Hopperdhh(at)aol.com
Guest





PostPosted: Mon Apr 10, 2006 4:07 am    Post subject: Lycoming flywheel pulley diameter Reply with quote

Hi Red,

I have two "ring gear supports". The one I would consider standard measures
9 3/4 inches on the outside with a 3/8 inch wide belt groove. This one is
marked 75030 ASSY.

I also have one with 2 pulleys. At the rear is one 8 3/8 inch on the
outside with a 1/2 inch wide groove. Just ahead of this groove is one that is 8
5/8 on the outside with a 3/8 inch wide groove. This one is marked LW15602
ASSY. This flywheel would not work on my IO-360-C1E6 with the front mounted
prop governor because the ID of the pulley interfered with the case.

These both are for an IO-360 with prop bolt/bushing holes about 3/4 inch
diameter.

Hope this helps. There are surely more flywheels than this out there.

Dan Hopper
RV-7A


In a message dated 4/9/2006 10:57:34 P.M. Eastern Standard Time,
redswing(at)mcn.org writes:



I think that there are two flywheel pulley diameters for the 4 cyl Lyc, does
anyone know what they are?
TIA,
Red Hamilton


- The Matronics Engines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Engines-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Engines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group