Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Annunciator light sizing?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
jschroeder(at)perigee.net
Guest





PostPosted: Sun Jan 01, 2006 8:44 am    Post subject: Annunciator light sizing? Reply with quote


Richard -
I used a lamp version of an NKK series lighted switch and they work very
well. They are LED's. We felt that they need to be dimmed a bit for night,
which can be done in our circuit with a couple of zener diodes.
Contact me off list if you are interested in the specs, wiring diagrams,
catalog (.pdf), sources and pictures of the annunciator panel.
Cheers,
John
On Sat, 31 Dec 2005 15:28:39 -0800, Richard Riley <Richard(at)RILEY.NET>
wrote:
Quote:
Does anyone have any experience or practical suggestions for what
size - in terms of wattage or lumens - to make an annunciator
light? It needs to be bright enough to see in daylight (though not
in direct sunlight) but not blinding at night.

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Fiveonepw(at)aol.com
Guest





PostPosted: Sun Jan 01, 2006 9:31 am    Post subject: Annunciator light sizing? Reply with quote


In a message dated 12/31/2005 5:32:51 PM Central Standard Time,
Richard(at)RILEY.NET writes:
Does anyone have any experience or practical suggestions for what
size - in terms of wattage or lumens - to make an annunciator
light? It needs to be bright enough to see in daylight (though not
in direct sunlight) but not blinding at night.
Quote:
>>>>

Hi Richard-
Here's the approach I used. Has worked quite nicely for almost 300 hours so
far, day and nite. Click on >>Next Entry>> at top of page for sebsequent
pages. Maybe you can get some ideas here.
http://websites.expercraft.com/n51pw/index.php?q=log entry&log id=5126
Have fun & Happy New Year, y'all!
Mark Phillips - Columbia, TN


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
jschroeder(at)perigee.net
Guest





PostPosted: Sun Jan 01, 2006 10:24 am    Post subject: Annunciator light sizing? Reply with quote


Richard -
I'm sorry I forgot to attribute a lot of credit to Mark. He shared his
system with me early on and I used the basics of the schematic in mine. It
is a rock solid piece of work. Since the lights are different, the actual
wiring and hardware reflect this. Check this for some pictures of the
panel & annunciator lights:
http://w1.lancair.net/pix/jschroeder-panel
John
Quote:
Hi Richard-
Here's the approach I used. Has worked quite nicely for almost 300
hours so
far, day and nite. Click on >>Next Entry>> at top of page for sebsequent
pages. Maybe you can get some ideas here.
http://websites.expercraft.com/n51pw/index.php?q=log entry&log id=5126
Have fun & Happy New Year, y'all!
Mark Phillips - Columbia, TN

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
rv-9a-online(at)telus.net
Guest





PostPosted: Sun Jan 01, 2006 7:27 pm    Post subject: Annunciator light sizing? Reply with quote


FYI to the list:
Through Vx Aviation, www.vx-aviation.com, I've developed several
annunciator lamp fields and controllers. Most of the circuit diagrams
are published for those who prefer to build them from scratch.
For those who don't, I sell pre-made arrays and controllers, as well as
an integrated controller/lamp array.
The real problem with annunciator lamps (besides how to label them) is
how to take all of the different sources (active high, active low,
reversing, etc.), drive the lamps and make them dimmable for night
operation. That's where the Vx controllers come in.
If any one has questions, they can contact me off list.
Thanks, Vern Little
RV-9A
www.vx-aviation.com
John Schroeder wrote:
Richard -
I'm sorry I forgot to attribute a lot of credit to Mark. He shared his
system with me early on and I used the basics of the schematic in mine. It
is a rock solid piece of work. Since the lights are different, the actual
wiring and hardware reflect this. Check this for some pictures of the
panel & annunciator lights:
http://w1.lancair.net/pix/jschroeder-panel
John


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group