Mark Phillips in TN
Joined: 10 Jan 2006 Posts: 431 Location: Columbia, TN
|
Posted: Mon Dec 18, 2006 5:45 pm Post subject: Wire for trim servos |
|
|
Hi Bob-
This stuff comes in pretty handy:
http://steinair.com/wire.htm
Scroll down to "Servo wire". Five 22ga for MAC trim and two 20ga for tail light/whatever (and just whut the doktur ordered for TruTrak servos). Take them wimpy wires from the MAC servo, strip back twice what you need for a butt splice, double it over and crimp. I also add a short skinny piece of heat shrink to the insulation to make sure the PIDG butt splice grabs aholt of the insulation...
Here's a suggestion from Bob Nuckolls at aeroelectric.com:
http://www.aeroelectric.com/articles/macservo/macservo.html
and others have crimped d-sub pins with shrink tube over each connection (female to harness, male to servo at staggered lengths to avoid "snake swallowed a pig" syndrome) to the wires to make the connection as well.
Mark
[quote][b]
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________ From The PossumWorks... |
|