Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

912ULS Spark Plug Gap????

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List
View previous topic :: View next topic  
Author Message
ricklach



Joined: 20 Jun 2006
Posts: 127
Location: Kernville, Calif.

PostPosted: Sun Dec 10, 2006 4:23 pm    Post subject: 912ULS Spark Plug Gap???? Reply with quote

I guess I’m blind. It’s a snow day and I’ve read through every manual I have (a total of four) for my 912ULS and I can not find the gap setting for the spark plugs. Could some one that is sure of what the gap should be please help me out, and if your really feeling benevolent you could even tell me which manual and page it is written on.

Thank you


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List
Back to top
View user's profile Send private message Send e-mail
M.Grass(at)comcast.net
Guest





PostPosted: Sun Dec 10, 2006 5:41 pm    Post subject: 912ULS Spark Plug Gap???? Reply with quote

Rick,

the spark plug gap is 0.7 - 0.8 mm for the 912ULS. You can find this
information on the "912 Maintenance Manual" document d01855 on page 38.

Regards

Michael Grass
Europa XS Trigear, Rotax 914

---


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List
Back to top
Roger Lee



Joined: 10 Jan 2006
Posts: 1464
Location: Tucson, Az.

PostPosted: Sun Dec 10, 2006 5:46 pm    Post subject: Re: 912ULS Spark Plug Gap???? Reply with quote

Hi Rick,

I usually set mine at .028 I like the slightly smaller gap because it has been easier to start on cold mornings. I have tried .030, but went back to .028. At a .028 my plugs are a light tan in color.
Go to the Rotax owners website. Open the Kodiak section. On the left side open the line maint. manual and page 102.
gap to be .027 to .031

I have printed this Line maint. and the heavy maint. manual out and put them in a 3 ring binder that I leave in the hanger. Printing it is cheaper than $29.95 and quicker.


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

_________________
Roger Lee
Tucson, Az.
Rotax Instructor & Rotax IRC
Light Sport Repairman
Home 520-574-1080 TRY HOME FIRST
Cell 520-349-7056
Back to top
View user's profile Send private message Send e-mail
NYTerminat(at)aol.com
Guest





PostPosted: Sun Dec 10, 2006 9:26 pm    Post subject: 912ULS Spark Plug Gap???? Reply with quote

It's in the maintenance manual, section12-00-00, pg 38. .0276-.0315 inch or .7-.8 mm

Bob Spudis
N701ZX CH701/912ULS 90hrs

In a message dated 12/10/2006 7:24:53 P.M. Eastern Standard Time, rick(at)ravengear.us writes:
Quote:
--> RotaxEngines-List message posted by: "ricklach" <rick(at)ravengear.us>

I guess I’m blind. It’s a snow day and I’ve read through every manual I have (a total of four) for my 912ULS and I can not find the gap setting for the spark plugs. Could some one that is sure of what the gap should be please help me out, and if your really feeling benevolent you could even tell me which manual and page it is written on.

Thank you



[quote][b]


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group