Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Filling All the Holes in a DB Connector

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
jluckey(at)pacbell.net
Guest





PostPosted: Thu Dec 28, 2023 11:04 am    Post subject: Filling All the Holes in a DB Connector Reply with quote

Closing the loop...
I spoke w/ Garmin Tech Support and the guy who teaches the Experimental Wiring class at the Aircraft Electronics Assn and I stand corrected. Somehow, I got it in my head that you should populate all the pins in a DB connector, even if there is no wire attached to it. Don't know where I got this but it is INCORRECT. - I was mistaken (not the first time;)
I don't think that there is anything wrong with doing this, but it is not a recommended procedure (as I had originally thought).

It is interesting to note however, that pre-wired harnesses from Spruce come with all the pins populated (even the ones without a wire attached). This is probably so that you can customize the pre-fabbed harness and add wires specific to your installation. But it would seem better if Spruce just populated the ones required for their harness and sent you a bag of spare pins. I wonder how many people bother to remove the un-used pins?


Happy New Year!
-Jeff


On Tuesday, November 21, 2023 at 04:12:43 PM PST, Matthew S. Whiting <m.whiting(at)frontier.com> wrote:




Where does Garmin recommend that? I don’t recall seeing that in the G3X installation manual. I’ve been an EE for nearly 40 years and don’t recall this being a common practice. Most weather resistant connectors have plugs available specifically for the holes in the connectors that aren’t loaded.

Matt
Sent from my iPad

Quote:
On Nov 21, 2023, at 4:46 PM, Jeff Luckey <jluckey(at)pacbell.net> wrote:

Listers,
Question about DB/D-Sub connectors eg: DB9, DB25, DB37, etc.

Garmin recommends, and it seems to be common practice, that all holes in a given DB connector have a pin/socket installed, even when there is no wire connected to that pin.
Why is that?


-Jeff





- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group