Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Kolb-List Digest: 4 Msgs - 09/07/21

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
phcpilot



Joined: 24 May 2016
Posts: 16

PostPosted: Wed Sep 08, 2021 10:33 am    Post subject: Kolb-List Digest: 4 Msgs - 09/07/21 Reply with quote

HELP
My username is playonwater.
Forgot password but cant change it.

On Wed, Sep 8, 2021 at 2:40 AM Kolb-List Digest Server <kolb-list(at)matronics.com (kolb-list(at)matronics.com)> wrote:

[quote]*

 =========================
   Online Versions of Today's List Digest Archive
 =========================

Today's complete Kolb-List Digest can also be found in either of the
two Web Links listed below.  The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation.  The .txt file includes the plain ASCII version
of the Kolb-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

    http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2021-09-07&Archive=Kolb

Text Version:

    http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2021-09-07&Archive=Kolb


 =======================
   EMail Version of Today's List Digest Archive
 =======================


           ----------------------------------------------------------
                           Kolb-List Digest Archive
                                      ---
                     Total Messages Posted Tue 09/07/21: 4
           ----------------------------------------------------------


Today's Message Index:
----------------------

     1. 04:42 AM - Gyroscopic preccession?  (Richard Pike)
     2. 06:50 AM - Re: Gyroscopic preccession?  (John Hauck)
     3. 12:01 PM - Re: Rotax 503 DIDC Complete engine package  (chic)
     4. 06:34 PM - Re: Gyroscopic preccession?  (Richard Pike)



________________________________  Message 1  _____________________________________


Time: 04:42:26 AM PST US
Subject: Gyroscopic preccession?
From: "Richard Pike" <thegreybaron(at)charter.net (thegreybaron(at)charter.net)>


Now that I finally have the 582 running properly with the 3.47:1 box and 72" 3
blade Ward Drive prop, I need to figure out how to deal with another oddity.

Back when I still had the 68" 2 blade Ivo, during takeoff roll in the MKIII raising
the tail during acceleration was a non event, you just raised the tail and
flew it off the ground.

Not any more. On several occasions, raising the tail causes the airplane to want
to yaw right and drop the left wing, and on a couple occasions the only way
to get it back under control was to chop the power.

Obviously I need to unlearn some old habits and learn some new ones.
Keep the tail on the ground until it gets up to x airspeed and there is enough
control authority to outmatch the gyroscopic precession?
keep the tail on the ground and wait until it just flies itself off? It certainly
feels like it has enough thrust to do this.
Go to a really big wide grass runway and carefully poke at it with a stick until
I figure it out?

Open to suggestions. John? You had a 3 blade 72" Warp on your MKIII; what say ye?

--------
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=503073#503073


________________________________  Message 2  _____________________________________


Time: 06:50:30 AM PST US
From: John Hauck <jhauck36(at)outlook.com (jhauck36(at)outlook.com)>
Subject: RE: Gyroscopic preccession?


Most MKIIIs with standard length gear legs sit level, or near level.  Homer Kolb
designed it this way primarily for low time pilots.  Helps prevent premature
takeoff, and it is more less apt to stall when slowing down to touch down and
land.

The main gear on my MKIII was considerably longer and 6 or 8 inches further forward
than a standard built MKIII.  No matter.  My MKIII or a standard built one,
I normally made my take offs without raising the tail wheel.  The excessive
wing incidence didn't have a problem flying off the ground in the standard 3
point attitude.

More power means more nose down thrust from the high, pusher thrust line.  Bigger
props mean more thrust.

If it was me, I'd fly it off in its 3 point attitude.  Keep playing with it to
see what the aircraft wants to do.

Muscle memory is very powerful without realizing it.  When I swapped from an 80
to a 100 hp Rotax, I couldn't get the MKIII to break ground at WOT my first takeoff.
Quickly realized what was happening, came back on the power a bit, and
she popped right off.  Caught me by surprise.  After the first takeoff I naturally
compensated for the change in additional thrust.

john h
Titus, AL

--


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group