 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
nuckolls.bob(at)aeroelect
Guest
|
 Posted: Fri Nov 06, 2020 8:38 am Post subject: The next generation . . . |
 |
|
Saw one of these on Banggood a few weeks ago
and had to get one to play with.
https://tinyurl.com/y3rlo8hk
At first blush, the thing seems quite capable
for making good solder joints of all sizes.
The cord is a bit 'stiff' which slightly hampers
control for tiny ECB parts. I may splice a
flexible cloth over rubber cord on it to enhance
that feature.
The Metcals are still the gold standard of soldering
irons but getting hard to find used/surplus . . . too
expensive new. My own Metcals are probably
40+ years old. When and if I need to replace one,
this new kid on the block may well fill the bill
for a whole lot less money!
In any case, these are exceedingly reasonable
for the performance offered . . . a cheap
experiment if you're interested in a
versatile soldering tool
Bob . . .
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
| Description: |
|
| Filesize: |
209.82 KB |
| Viewed: |
1385 Time(s) |
|
|
|
| Back to top |
|
 |
echristley(at)att.net
Guest
|
| Posted: Fri Nov 06, 2020 9:02 am Post subject: The next generation . . . |
|
|
For those not familiar with Banggood:
https://www.amazon.com/Adjustable-Temperature-Controlled-Thermostatic-Electronic/dp/B089SKWMPT/ref=sr_1_12?dchild=1&keywords=soldering+iron&sr=8-12
On Friday, November 6, 2020, 11:39:39 AM EST, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com> wrote:
Saw one of these on Banggood a few weeks ago
and had to get one to play with.
https://tinyurl.com/y3rlo8hk
At first blush, the thing seems quite capable
for making good solder joints of all sizes.
The cord is a bit 'stiff' which slightly hampers
control for tiny ECB parts. I may splice a
flexible cloth over rubber cord on it to enhance
that feature.
The Metcals are still the gold standard of soldering
irons but getting hard to find used/surplus . . . too
expensive new. My own Metcals are probably
40+ years old. When and if I need to replace one,
this new kid on the block may well fill the bill
for a whole lot less money!
In any case, these are exceedingly reasonable
for the performance offered . . . a cheap
experiment if you're interested in a
versatile soldering tool
Bob . . .
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
