Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CJ6 aileron bearings

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
Harv



Joined: 01 Jul 2010
Posts: 170

PostPosted: Sat Jul 11, 2020 12:08 am    Post subject: CJ6 aileron bearings Reply with quote

Good morning all

Would anyone know the exact bearing size/spec needed for the cj6 aileron mount bracket?

Looks to be a common size one used all over the aircraft for pull rods, rudder hinges etc and I’d like to get one before we pull the old one out if possible.

Cheers, happy flying

Harv


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



A9431297-4DB6-44AC-9358-C2E667B6B2E3.jpeg
 Description:
 Filesize:  1.28 MB
 Viewed:  6585 Time(s)

A9431297-4DB6-44AC-9358-C2E667B6B2E3.jpeg


Back to top
View user's profile Send private message
Harv



Joined: 01 Jul 2010
Posts: 170

PostPosted: Sun Jul 12, 2020 5:30 am    Post subject: Re: CJ6 aileron bearings - Part Number Update Reply with quote

Managed to remove said bearing with home made puller.

The part required is 126TV should anyone else need to do this, it’s a self aligning double row 6mm ID x 19mm OD x 6mm bearing


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
draftsjust417(at)gmail.co
Guest





PostPosted: Sun Jul 12, 2020 6:46 am    Post subject: CJ6 aileron bearings Reply with quote

Good news, thanks for the info...Justin 
On Sun, Jul 12, 2020, 6:50 AM Harv <martin.harvey(at)kbr.com (martin.harvey(at)kbr.com)> wrote:

Quote:
--> Yak-List message posted by: "Harv" <martin.harvey(at)kbr.com (martin.harvey(at)kbr.com)>

Managed to remove said bearing with home made puller.

The part required is 126TV should anyone else need to do this, it’s a self aligning double row 6mm ID x 19mm OD x 6mm bearing




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=497256#497256






===========
List" rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/Navigator?Yak-List
===========
FORUMS -
eferrer noreferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer noreferrer" target="_blank">http://wiki.matronics.com
===========
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/contribution
===========





- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
AlaskaChang801



Joined: 26 Jan 2018
Posts: 36

PostPosted: Tue Aug 25, 2020 9:12 am    Post subject: Re: CJ6 aileron bearings Reply with quote

I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.

- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



CJ bearings.jpg
 Description:
 Filesize:  1.35 MB
 Viewed:  6296 Time(s)

CJ bearings.jpg


Back to top
View user's profile Send private message
dsavarese0812(at)bellsout
Guest





PostPosted: Tue Aug 25, 2020 12:10 pm    Post subject: CJ6 aileron bearings Reply with quote

The bearings are 6x19x6 mm self aligning bearings. They are available all over the internet. Be sure to include “self aligning bearing” in your search.
Dennis

Sent from my iPhone

Quote:
On Aug 25, 2020, at 1:18 PM, AlaskaChang801 <themilnes95(at)gmail.com> wrote:



I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=497975#497975




Attachments:

http://forums.matronics.com//files/cj_bearings_942.jpg








- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
wamflight(at)gmail.com
Guest





PostPosted: Tue Aug 25, 2020 12:34 pm    Post subject: CJ6 aileron bearings Reply with quote

typed: 6x19x6 mm self aligning bearings- into google. Anywhere from $4 to $26 for the same thing.

Quote:
On Aug 25, 2020, at 3:07 PM, Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)> wrote:
--> Yak-List message posted by: Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)>The bearings are 6x19x6 mm self aligning bearings. They are available all over the internet. Be sure to include “self aligning bearing” in your search. Dennis Sent from my iPhone
Quote:
On Aug 25, 2020, at 1:18 PM, AlaskaChang801 <themilnes95(at)gmail.com (themilnes95(at)gmail.com)> wrote:--> Yak-List message posted by: "AlaskaChang801" <themilnes95(at)gmail.com (themilnes95(at)gmail.com)>I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.Read this topic online here:http://forums.matronics.com/viewtopic.php?p=497975#497975Attachments: http://forums.matronics.com//files/cj_bearings_942.jpg
http://www.matronics.com/Navigator?Yak-Listhttp://wiki.matronics.com



- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
pennington.construction.i
Guest





PostPosted: Tue Aug 25, 2020 12:54 pm    Post subject: CJ6 aileron bearings Reply with quote

Dennis makes a real good point.  He gave me this information some time ago.  I wasn’t sure why self aligning was so important.  

Found out you are pretty much guaranteed a smooth non binding rotation.  Probably important.  That is what the literature and the tech support person at 123 bearing shared with me.   He also suggested as many balls as possible.   (There is a joke in there for sure)
Those bearings are all over the plane.  
The rigid bearing may be a mistake.  
Mark 

On Tue, Aug 25, 2020 at 4:15 PM Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)> wrote:

Quote:
--> Yak-List message posted by: Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)>

The bearings are 6x19x6 mm self aligning bearings. They are available all over the internet. Be sure to include “self aligning bearing” in your search.

Dennis

Sent from my iPhone

Quote:
On Aug 25, 2020, at 1:18 PM, AlaskaChang801 <themilnes95(at)gmail.com (themilnes95(at)gmail.com)> wrote:

Quote:


Quote:
--> Yak-List message posted by: "AlaskaChang801" <themilnes95(at)gmail.com (themilnes95(at)gmail.com)>

Quote:


Quote:
I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.

Quote:


Quote:


Quote:


Quote:


Quote:
Read this topic online here:

Quote:


Quote:
http://forums.matronics.com/viewtopic.php?p=497975#497975

Quote:


Quote:


Quote:


Quote:


Quote:
Attachments:

Quote:


Quote:
http://forums.matronics.com//files/cj_bearings_942.jpg

Quote:


Quote:


Quote:


Quote:


Quote:


Quote:



http://www.matronics.com/Navig========================http://forums.matroni=              - NEW MATRONICS LIST WI=   --> http://www.matronics=====================



- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
dsavarese0812(at)bellsout
Guest





PostPosted: Tue Aug 25, 2020 1:09 pm    Post subject: CJ6 aileron bearings Reply with quote

No rigid bearing unless the original is rigid. Dennis

Sent from my iPhone

Quote:
On Aug 25, 2020, at 4:56 PM, Mark Pennington <pennington.construction.inc.1(at)gmail.com> wrote:

Dennis makes a real good point. He gave me this information some time ago. I wasn’t sure why self aligning was so important. Â

Found out you are pretty much guaranteed a smooth non binding rotation. Probably important. That is what the literature and the tech support person at 123 bearing shared with me.  He also suggested as many balls as possible.  (There is a joke in there for sure)
Those bearings are all over the plane. Â
The rigid bearing may be a mistake. Â
MarkÂ

On Tue, Aug 25, 2020 at 4:15 PM Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)> wrote:

Quote:
--> Yak-List message posted by: Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)>

The bearings are 6x19x6 mm self aligning bearings. They are available all over the internet. Be sure to include “self aligning bearing” in your search.

Dennis

Sent from my iPhone

Quote:
On Aug 25, 2020, at 1:18 PM, AlaskaChang801 <themilnes95(at)gmail.com (themilnes95(at)gmail.com)> wrote:

Quote:


Quote:
--> Yak-List message posted by: "AlaskaChang801" <themilnes95(at)gmail.com (themilnes95(at)gmail.com)>

Quote:


Quote:
I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.

Quote:


Quote:


Quote:


Quote:


Quote:
Read this topic online here:

Quote:


Quote:
http://forums.matronics.com/viewtopic.php?p=497975#497975

Quote:


Quote:


Quote:


Quote:


Quote:
Attachments:

Quote:


Quote:
http://forums.matronics.com//files/cj_bearings_942.jpg

Quote:


Quote:


Quote:


Quote:


Quote:


Quote:



http://www.matronics.com/Navig========================http://forums.matroni=Â Â Â Â Â Â Â - NEW MATRONICS LIST WI=Â Â --> http://www.matronics=====================






- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
dougsappllc(at)gmail.com
Guest





PostPosted: Tue Aug 25, 2020 2:55 pm    Post subject: CJ6 aileron bearings Reply with quote

There are basically two sizes of self aligning bearings used in the CJ.  I normally have good stock on both.
Doug
On Tue, Aug 25, 2020 at 1:39 PM William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:

Quote:
typed:   6x19x6 mm self aligning bearings- into google. Anywhere from $4 to $26 for the same thing.
Quote:
On Aug 25, 2020, at 3:07 PM, Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)> wrote:

--> Yak-List message posted by: Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)>

The bearings are 6x19x6 mm self aligning bearings. They are available all over the internet. Be sure to include “self aligning bearing” in your search.
Dennis

Sent from my iPhone

Quote:
On Aug 25, 2020, at 1:18 PM, AlaskaChang801 <themilnes95(at)gmail.com (themilnes95(at)gmail.com)> wrote:

--> Yak-List message posted by: "AlaskaChang801" <themilnes95(at)gmail.com (themilnes95(at)gmail.com)>

I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=497975#497975


Attachments:

http://forums.matronics.com//files/cj_bearings_942.jpg

http://www.matronics.com/Navigator?Yak-List
http://wiki.matronics.comhttp://www.matronics.com/contribution





- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
dsavarese0812(at)bellsout
Guest





PostPosted: Wed Aug 26, 2020 7:05 am    Post subject: CJ6 aileron bearings Reply with quote

Absolutely! Make it easy on yourself if you're looking for bearings, or anything else for CJ's for that matter. Just call Doug. He should clearly your go-to guy.
Dennis


On Tuesday, August 25, 2020, 6:57:52 PM EDT, doug sapp <dougsappllc(at)gmail.com> wrote:




There are basically two sizes of self aligning bearings used in the CJ. I normally have good stock on both.
Doug
On Tue, Aug 25, 2020 at 1:39 PM William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:

Quote:
typed: 6x19x6 mm self aligning bearings- into google. Anywhere from $4 to $26 for the same thing.
Quote:
On Aug 25, 2020, at 3:07 PM, Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)> wrote:

--> Yak-List message posted by: Anthony Savarese <dsavarese0812(at)bellsouth.net (dsavarese0812(at)bellsouth.net)>

The bearings are 6x19x6 mm self aligning bearings. They are available all over the internet. Be sure to include “self aligning bearing” in your search.
Dennis

Sent from my iPhone

Quote:
On Aug 25, 2020, at 1:18 PM, AlaskaChang801 <themilnes95(at)gmail.com (themilnes95(at)gmail.com)> wrote:

--> Yak-List message posted by: "AlaskaChang801" <themilnes95(at)gmail.com (themilnes95(at)gmail.com)>

I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=497975#497975


Attachments:

http://forums.matronics.com//files/cj_bearings_942.jpg


http://www.matronics.com/Navigator?Yak-List
http://wiki.matronics.com
http://www.matronics.com/contribution





- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
kiwi679



Joined: 08 Jul 2011
Posts: 20
Location: Netherlands

PostPosted: Wed Aug 26, 2020 9:40 pm    Post subject: CJ6 aileron bearings Reply with quote

Dennis. Are these the same size bearings for the canopy of a Yak?

Kiwi.

Quote:
On 25 Aug 2020, at 22:07, Anthony Savarese <dsavarese0812(at)bellsouth.net> wrote:



The bearings are 6x19x6 mm self aligning bearings. They are available all over the internet. Be sure to include “self aligning bearing” in your search.
Dennis

Sent from my iPhone

> On Aug 25, 2020, at 1:18 PM, AlaskaChang801 <themilnes95(at)gmail.com> wrote:
>
> 
>
> I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=497975#497975
>
>
>
>
> Attachments:
>
> http://forums.matronics.com//files/cj_bearings_942.jpg
>
>
>
>
>
>







- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
regards Stephen
Back to top
View user's profile Send private message
dsavarese0812(at)bellsout
Guest





PostPosted: Thu Aug 27, 2020 3:53 am    Post subject: CJ6 aileron bearings Reply with quote

Yes, BUT they are fixed bearings. Not self aligning.

Sent from my iPhone

Quote:
On Aug 27, 2020, at 1:42 AM, Stephen van Dijck <s.dijck(at)planet.nl> wrote:



Dennis. Are these the same size bearings for the canopy of a Yak?

Kiwi.

> On 25 Aug 2020, at 22:07, Anthony Savarese <dsavarese0812(at)bellsouth.net> wrote:
>
>
>
> The bearings are 6x19x6 mm self aligning bearings. They are available all over the internet. Be sure to include “self aligning bearing” in your search.
> Dennis
>
> Sent from my iPhone
>
>>> On Aug 25, 2020, at 1:18 PM, AlaskaChang801 <themilnes95(at)gmail.com> wrote:
>>
>> 
>>
>> I just replaced my elevator bearings and from what I know they are the same as the rudder and ailerons. I don't know the spec size, but I can tell you this! They are the same bearings in the canopy rollers and therefore you can buy a set of them fairly cheap from Todd Bohlman, you can find him on Ebay as that's where he sells them or search for him on the Red Star Facebook page.
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=497975#497975
>>
>>
>>
>>
>> Attachments:
>>
>> http://forums.matronics.com//files/cj_bearings_942.jpg
>>
>>
>>
>>
>>
>>
>
>
>
>
>







- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group