Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Rotax 912 Carb heat for Europa

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
alan_hunter1664



Joined: 05 Oct 2013
Posts: 35

PostPosted: Thu Mar 14, 2019 9:02 pm    Post subject: Rotax 912 Carb heat for Europa Reply with quote

I have bought a used Rotax 912uls that has the skydrive carb heat kit installed. I would assume that in the UK this kit requires a formal modification for the Europa but I can't find one anywhere. The Kit moves the carburetors back by about 15mm so not sure they will fit anyway? Anyone any experience of this kit in the UK on the Europa or do I need to by new carburetors as I see no easy way to remove the kit once it is fitted?

Alan


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List



IMG_0923.JPG
 Description:
 Filesize:  2.16 MB
 Viewed:  4395 Time(s)

IMG_0923.JPG


Back to top
View user's profile Send private message
JonathanMilbank



Joined: 14 Apr 2012
Posts: 383
Location: Aberdeen area

PostPosted: Fri Mar 15, 2019 2:02 am    Post subject: Re: Rotax 912 Carb heat for Europa Reply with quote

Good morning Alan,

This kit is very common in the UK and I would guess that more than half of all Europas have it fitted. In my case I simply got my inspector to sign in the log book that I had fitted it correctly. It seems to me that an inspector's signature would keep the LAA happy and probably whoever you bought the engine from got such an endorsement.

In order to accommodate the extra 15 mm or so which the kit necessitates, I cut the equivalent length off the hoses and/or spigots of the air intake filter box. But why did I decide to install the carb heat kit at all?

Carb ice is rare in Rotax 912 engines as fitted to Europas, but it happened once to one of my syndicate group members after a very long time at 2000 rpm idle on the ground, while he was waiting at the runway threshold holding point. Conditions were ideal for icing, being a chilly day with near 100% relative humidity and quite low rpm. If he had lined up and commenced his take off run slightly earlier, he might have experienced the engine cut shortly after take off rather than at the threshold.

This incident which I witnessed was enough to provoke me into buying and fitting the Skydrive kit without delay. Even though it keeps the carburettor bodies permanently warmed, the engine power doesn't seem to have been significantly affected.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Burrilla



Joined: 25 Apr 2015
Posts: 181

PostPosted: Fri Mar 15, 2019 2:28 am    Post subject: Rotax 912 Carb heat for Europa Reply with quote

I think there is a LAA standard mod and listed on The Europa club website, try SM10427/1 91X series Carburettor Heater (water).

Alan Burrill

Sent from my iPhone

Quote:
On 15 Mar 2019, at 10:02, JonathanMilbank <jdmilbank(at)yahoo.co.uk> wrote:



Good morning Alan,

This kit is very common in the UK and I would guess that more than half of all Europas have it fitted. In my case I simply got my inspector to sign in the log book that I had fitted it correctly. It seems to me that your inspector's signature would keep the LAA happy and probably whoever you bought the engine from got such an endorsement.

In order to accommodate the extra 15 mm or so which the kit necessitates, I cut the equivalent length off the hoses and/or spigots of the air intake filter box. But why did I decide to install the carb heat kit at all?

Carb ice is rare in Rotax 912 engines as fitted to Europas, but it happened once to one of my syndicate group members after a very long time at 2000 rpm idle on the ground, while he was waiting at the runway threshold holding point. Conditions were ideal for icing, being a chilly day with near 100% relative humidity and quite low rpm. If he had lined up and commenced his take off run slightly earlier, he might have experienced the the engine cut shortly after take off rather than at the threshold.

This incident which I witnessed was enough to provoke me into buying and fitting the Skydrive kit without delay. Even though it keeps the carburettor bodies permanently warmed, the engine power doesn't seem to have been significantly affected.




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=488078#488078











- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Kelvin Weston



Joined: 14 Apr 2010
Posts: 89
Location: Hampshire, UK

PostPosted: Fri Mar 15, 2019 10:21 am    Post subject: Re: Rotax 912 Carb heat for Europa Reply with quote

Hi Alan

Try this link to the LAA website:

http://www.lightaircraftassociation.co.uk/engineering/Standard%20Mods/rotaxEngine.html

The Skydrive kit is covered by Rotax Standard Mod SM10427 as stated earlier.

Your inspector will need to sign off using form LAA/MOD 1 also available on the LAA website:

http://www.lightaircraftassociation.co.uk/engineering/standardforms.html


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Regards

Kelv Weston
Kit 497
kelv@kdweston.co.uk
Back to top
View user's profile Send private message Send e-mail
alan_hunter1664



Joined: 05 Oct 2013
Posts: 35

PostPosted: Fri Mar 15, 2019 10:50 am    Post subject: Re: Rotax 912 Carb heat for Europa Reply with quote

That is good news, Thank you for your responses.
Alan


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group