Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Are you ready for Requirements For The Collection of Glass

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
ahwhglass



Joined: 15 Nov 2018
Posts: 2

PostPosted: Sun Dec 23, 2018 11:45 pm    Post subject: Are you ready for Requirements For The Collection of Glass Reply with quote

The glass used for that glass curtain wall need to be safety glass, mainly like Building Tempered Glass, laminated (glued) goblet, insulating glass, fireproof tumbler, solar control coated cup and low-emission coated glass (High Transmission Low-E Glass). The specific selection requirements are seeing that follows:

1. Safety glass need to be used for the curtain wall. The thickness on the glass should not be below 6mm. The thickness from the full glass curtain wall rib glass can't be less than 12mm.

COUPLE OF. The appearance quality in addition to technical index of drift glass used for heat-reflecting coated glass shall abide by the requirements of excellent products or first-class products in the current national standard "Float Glass".

SEVERAL. The insulating double glazed windows belonging to the curtain wall should end up being sealed with two stations.

The insulating glass from the exposed frame curtain wall should be made of polysulfide sealant and butyl sealant. The insulating glass of the semi-hidden frame curtain wall will likely to be made of silicone structural sealant as well as butyl sealant; the coated surface should be the second of the actual insulating glass. Or for the third side.

4, the laminated glass with the curtain wall should be processed by polyvinyl butyral (PVB) picture dry processing of laminated cup. The thickness of your interlayer film (PVB) with the point-supported glass curtain wall structure laminated glass shall not be not as much as 0. 76 mm.

5, tempered glass should adhere to the provisions of GB9963 "tempered glass".

A FEW. All curtain wall glass really should be edge treated.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group