Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Faston / Aveo Tab Terminals
Goto page Previous  1, 2
 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Fri May 11, 2018 8:30 am    Post subject: Faston / Aveo Tab Terminals Reply with quote

At 08:56 AM 5/11/2018, you wrote:
Quote:
Bob:

You are mixing Apples and Apple Sauce and coming up with Lumpy Apple Sauce.

Those are PINS not Lugs.

okay . . .

Quote:
The Pins are supported by the connector.

yes . . .

Quote:
The Lugs are hanging out into the air. No support!

that's what double wall heat shrink is for . . .

Quote:
And that is why PIDG type Lugs are preferred!

preferred but not necessarily required . . .
especially when using 'softer' fat wires
for battery/starter circuits.

[img]cid:7.1.0.9.0.20180511112547.0595a938(at)aeroelectric.com.2[/img]



Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



10094c4.jpg
 Description:
 Filesize:  146.08 KB
 Viewed:  1018 Time(s)

10094c4.jpg


Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Fri May 11, 2018 8:35 am    Post subject: Faston / Aveo Tab Terminals Reply with quote

At 10:29 AM 5/11/2018, you wrote:
Quote:
Why are you installing "lugs" that are hanging out into the air?

Me thinks the problem with lugs is caused by the problem of not following another good practice, which is that the wire should be tied down in some manner to isolate the crimp connection from vibration. You have to analyze the whole system. Not just one connector style.

Agreed. Nearly all creative arts from cooking to building
airplanes, building houses and certainly all engineering
is a study in (1) properties of materials and (2) management of
energy as a SYSTEM. Policy and procedure can be exceedingly
helpful (as long as it is correct . . . remember the AC43.13
fiasco of about 15 years back?) but it can never replace
understanding of the physics.



Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
alec(at)alecmyers.com
Guest





PostPosted: Fri May 11, 2018 8:42 am    Post subject: Faston / Aveo Tab Terminals Reply with quote

Both molex .062 type and AMP mate-n-lok connectors have wrapover insulation supports on the pins, and manage well without further support from the back shell. That is considered adequate, with appropriate wire support in the bundle.

On May 11, 2018, at 12:34, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
At 10:29 AM 5/11/2018, you wrote:
Quote:
Why are you installing "lugs" that are hanging out into the air?

Me thinks the problem with lugs is caused by the problem of not following another good practice, which is that the wire should be tied down in some manner to isolate the crimp connection from vibration. You have to analyze the whole system. Not just one connector style.

Agreed. Nearly all creative arts from cooking to building
airplanes, building houses and certainly all engineering
is a study in (1) properties of materials and (2) management of
energy as a SYSTEM. Policy and procedure can be exceedingly
helpful (as long as it is correct . . . remember the AC43.13
fiasco of about 15 years back?) but it can never replace
understanding of the physics.



Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group