Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Cable end crimping

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
fly4grins(at)gmail.com
Guest





PostPosted: Sun May 06, 2018 10:35 am    Post subject: Cable end crimping Reply with quote

Quote:
When it came time to put terminals on my battery / welding cables, I went to the local welding supply house. For ten bucks they would crimp whatever I brought in. Or, for the same ten bucks, I could have my very own hammer driven, bench mounted cable end crimper. Works fine, lasts long time.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Bill Allen



Joined: 24 Aug 2009
Posts: 42
Location: UK

PostPosted: Mon May 07, 2018 5:11 am    Post subject: Cable end crimping Reply with quote

Following on from that, I need to extend my starter motor feed, - could anyone point me to a supplier of large but-splice connectors?
Bill Allen

On Sun, 6 May 2018 at 20:39, GLEN MATEJCEK <fly4grins(at)gmail.com (fly4grins(at)gmail.com)> wrote:

Quote:
Quote:
When it came time to put terminals on my battery / welding cables, I went to the local welding supply house. For ten bucks they would crimp whatever I brought in. Or, for the same ten bucks, I could have my very own hammer driven, bench mounted cable end crimper. Works fine, lasts long time. 



--
Bill AllenLongEz160 N99BA FD51
CZ4 G-BYLZ EGBJ


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
ceengland7(at)gmail.com
Guest





PostPosted: Mon May 07, 2018 6:40 am    Post subject: Cable end crimping Reply with quote

Your local electrical supply house.
Your local car stereo specialist.
Granger.
McMaster-Carr.
Ebay.
A short section of copper tubing.

Charlie

On 5/7/2018 8:09 AM, Bill Allen wrote:

Quote:
Following on from that, I need to extend my starter motor feed, - could anyone point me to a supplier of large but-splice connectors?


Bill Allen

On Sun, 6 May 2018 at 20:39, GLEN MATEJCEK <fly4grins(at)gmail.com (fly4grins(at)gmail.com)> wrote:

Quote:
Quote:
When it came time to put terminals on my battery / welding cables, I went to the local welding supply house. For ten bucks they would crimp whatever I brought in. Or, for the same ten bucks, I could have my very own hammer driven, bench mounted cable end crimper. Works fine, lasts long time. 



--
Bill Allen LongEz160 N99BA FD51
CZ4 G-BYLZ EGBJ



Virus-free. www.avast.com [url=#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Bill Allen



Joined: 24 Aug 2009
Posts: 42
Location: UK

PostPosted: Mon May 07, 2018 6:54 am    Post subject: Cable end crimping Reply with quote

Thanks, I'll check them out.

On Mon, 7 May 2018 at 16:45, Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:

Quote:
Your local electrical supply house.
Your local car stereo specialist.
Granger.
McMaster-Carr.
Ebay.
A short section of copper tubing.

Charlie

On 5/7/2018 8:09 AM, Bill Allen wrote:


Quote:
Following on from that, I need to extend my starter motor feed, - could anyone point me to a supplier of large but-splice connectors?


Bill Allen

On Sun, 6 May 2018 at 20:39, GLEN MATEJCEK <fly4grins(at)gmail.com (fly4grins(at)gmail.com)> wrote:

Quote:
Quote:
When it came time to put terminals on my battery / welding cables, I went to the local welding supply house. For ten bucks they would crimp whatever I brought in. Or, for the same ten bucks, I could have my very own hammer driven, bench mounted cable end crimper. Works fine, lasts long time. 



--
Bill Allen LongEz160 N99BA FD51
CZ4 G-BYLZ EGBJ





Virus-free. www.avast.com [url=#m_3071936470631557684_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]



--
Bill AllenLongEz160 N99BA FD51
CZ4 G-BYLZ EGBJ


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Tue May 08, 2018 5:41 am    Post subject: Cable end crimping Reply with quote

At 08:09 AM 5/7/2018, you wrote:
Quote:
Following on from that, I need to extend my starter motor feed, - could anyone point me to a supplier of large but-splice connectors?

Why not just replace the wire? How long
is it? Have you considered welding cable
from local supplier . . . they might even
be able to hydraulically apply terminals
for a decent price.



Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Bill Allen



Joined: 24 Aug 2009
Posts: 42
Location: UK

PostPosted: Tue May 08, 2018 6:11 am    Post subject: Cable end crimping Reply with quote

Replacing the wire was a possibility, but it runs so deep and long into the wing/fuselage that it would be more surgery than just replacing the section in the engine bay which had the last  4” overheat due to a poor connection.
I’m thinking something like this;
https://www.amazon.com/Panduit-SCS2-0-X-Conductor-Standard/dp/B007EWQDSU/ref=sr_1_19?ie=UTF8&qid=1525699768&sr=8-19&keywords=%232+wire+butt+splicesHere
Bill

On Tue, 8 May 2018 at 15:46, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:

Quote:
At 08:09 AM 5/7/2018, you wrote:
Quote:
Following on from that, I need to extend my starter motor feed, - could anyone point me to a supplier of large but-splice connectors?


 Why not just replace the wire? How long
 is it? Have you considered welding cable
 from local supplier . . . they might even
 be able to hydraulically apply terminals
 for a decent price.



  Bob . . .

--
Bill AllenLongEz160 N99BA FD51
CZ4 G-BYLZ EGBJ


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group