Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Zenith601-List Digest: 1 Msgs - 04/24/18

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith601-List
View previous topic :: View next topic  
Author Message
dwbbrown(at)gmail.com
Guest





PostPosted: Wed Apr 25, 2018 4:39 am    Post subject: Zenith601-List Digest: 1 Msgs - 04/24/18 Reply with quote

I also use a bore scope and a close eye inspection at annual. Also I have always given a gentle up and down shake to the horizontal stabilizer as part of every preflight.
David
601XLB

Sent from my iPad

Quote:
On Apr 25, 2018, at 01:48, Zenith601-List Digest Server <zenith601-list(at)matronics.com> wrote:

*

==================================================
Online Versions of Today's List Digest Archive
==================================================

Today's complete Zenith601-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith601-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-04-24&Archive=Zenith601

Text Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-04-24&Archive=Zenith601


================================================
EMail Version of Today's List Digest Archive
================================================


----------------------------------------------------------
Zenith601-List Digest Archive
---
Total Messages Posted Tue 04/24/18: 1
----------------------------------------------------------


Today's Message Index:
----------------------

1. 08:05 AM - Re: Zenith601-List Digest: 2 Msgs - 04/23/18 (Comcast)



________________________________ Message 1 _____________________________________


Time: 08:05:48 AM PST US
From: Comcast <4rcsimmons(at)comcast.net>
Subject: Re: Zenith601-List Digest: 2 Msgs - 04/23/18


I use a bore scope to get a good look. My brackets are painted so if a crack appears,
it should show by means of broken paint.

I do look now at every oil change.

Mine fit snug during assembly so I dont believe there is unintended stress.

I do keep my eye open for it though

- Rich

>> On Apr 24, 2018, at 1:47 AM, Zenith601-List Digest Server <zenith601-list(at)matronics.com>
> wrote:
>
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Zenith601-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Zenith601-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-04-23&Archive=Zenith601
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-04-23&Archive=Zenith601
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Zenith601-List Digest Archive
> ---
> Total Messages Posted Mon 04/23/18: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:56 AM - Horizontal Stabilizer Safety Bulletin 2017 (Bobby Paulk)
> 2. 07:51 AM - Re: Horizontal Stabilizer Safety Bulletin 2017 (Paul Mulwitz)
>
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 06:56:14 AM PST US
> From: Bobby Paulk <bobbypaulk(at)comcast.net>
> Subject: Horizontal Stabilizer Safety Bulletin 2017
>
> Re: Horizontal Stabilizer Safety Bulletin 2017
>
>
> While doing my "Condition" Inspection I found out about the cracked attach brackets
> on the Zodiac. I examined all the visible ones very carefully and found no
> problems. I believe the cracking is due to very poor workmanship and using an
> over sized washer that extended into the curved radius of the bend in the metal.
> The photos on the site are a sign of very poor workmanship and not a design
> problem. My plane was built using the fast build kit and the Horizontal Stabilizer
> spar and attach fittings came assembled from the factory.
>
> I would like to know what most builders are doing about the 2 angles inside the
> skin. At this time I do not believe I will remove and cut the hole to examine
> them.
>
> Any input from builders would be appreciated.
>
> Thank You
>
>
> Bobby
>
> Zodiac 601 "B"
>
> Jabiru 3300 295 hrs.
>
> ________________________________ Message 2 _____________________________________
>
>
> Time: 07:51:32 AM PST US
> Subject: Re: Horizontal Stabilizer Safety Bulletin 2017
> From: Paul Mulwitz <psm(at)att.net>
>
> I'm not sure I understand the attach bracket problem. That said, I
> didn't like the way the 4 aluminum parts holding the horizontal
> stabilizer in place on my Zodiac XL were performing. The stabilizer
> could be moved easily by applying force on the end. So I changed them
> to steel. The stabilizer is firmly attached on my plane.
>
> We should remember there was no revision control on the Zodiac XL
> changes. It is possible that each one of the thousand copies of this
> design is different from the others.
>
> Paul
> Camas, WA
> CH601 XL (I installed the upgrade but didn't change the part number to
> "B". My plane was already registered when Zenith decided the upgrade
> changed the part number.)
>
>> On 4/23/2018 6:53 AM, Bobby Paulk wrote:
>>
>> Re: Horizontal Stabilizer Safety Bulletin 2017
>>
>>
>> While doing my "Condition" Inspection I found out about the cracked
>> attach brackets on the Zodiac. I examined all the visible ones very
>> carefully and found no problems. I believe the cracking is due to very
>> poor workmanship and using an over sized washer that extended into the
>> curved radius of the bend in the metal. The photos on the site are a
>> sign of very poor workmanship and not a design problem. My plane was
>> built using the fast build kit and the Horizontal Stabilizer spar and
>> attach fittings came assembled from the factory.
>>
>> I would like to know what most builders are doing about the 2 angles
>> inside the skin. At this time I do not believe I will remove and cut
>> the hole to examine them.
>>
>> Any input from builders would be appreciated.
>>
>> Thank You
>>
>>
>> Bobby
>>
>> Zodiac 601 "B"
>>
>> Jabiru 3300 295 hrs.










- The Matronics Zenith601-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith601-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group