|Posted: Sun Jan 28, 2018 11:46 am Post subject: RCA video camera feed splitter (CORRECTION)
At 06:00 PM 12/4/2017, you wrote:
|--> AeroElectric-List message posted by: "Eric Page" <edpav8r(at)yahoo.com>
> A D-sub housing I've found quite useful is the 956 series devices from NorComp. They have an inside height of 0.570 and will allow you to socket a chip on the far end . . . the board deflects off centerline by about 0.050.
Bob, your timing is impeccable. I turned on the computer to order some parts and saw your post. I'll get the 956-series backshell. I was looking at NorComp's 983-series, but yours looks nearly identical for interior volume and is 1/4 the cost.
Once I have the parts I'll do a quick cardboard template of the PCB before I order those, to be sure they'll fit.
the optimum board size is 1.175 x 0.830 for the 15-pin
shells. Let me know what you find for 25-pin . . . if you
need to go that big.
Bob . . .
|- The Matronics AeroElectric-List Email Forum -|
Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:http://www.matronics.com/Navigator?AeroElectric-List