Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Clever Wiring for Lamp Dimmer

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
art(at)zemon.name
Guest





PostPosted: Thu Dec 07, 2017 5:06 pm    Post subject: Clever Wiring for Lamp Dimmer Reply with quote

Folks,
I have ten backlit switches in the panel of my plane. I need to wire all of them to the same dimmer, see the diagram on page 4 of the attached AeroRockers Circuit Diagrams, specifically the red line to the PULSE-WIDTH DIMMER box. The switches have Faston tabs. Is there some clever way to wire this? Do I just build something with a Faston terminal at one end for the dimmer and then 10 wires coming out of it, all tied up into a bundle, each with another Faston terminal?

    -- Art Z.


--
https://CheerfulCurmudgeon.com/"If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



AeroRocker_Circuit_Diagrams.pdf
 Description:

Download
 Filename:  AeroRocker_Circuit_Diagrams.pdf
 Filesize:  567.84 KB
 Downloaded:  1238 Time(s)

Back to top
enginerdy(at)gmail.com
Guest





PostPosted: Thu Dec 07, 2017 5:25 pm    Post subject: Clever Wiring for Lamp Dimmer Reply with quote

Maybe you can wire a running string of fast-ons with two wires coming out of each fast-on? It reduces reliability to wire in series like that, but switch illumination is relatively(?) non-critical..

Daniel

On Dec 7, 2017, at 7:06 PM, Art Zemon <art(at)zemon.name (art(at)zemon.name)> wrote:
Quote:
Folks,
I have ten backlit switches in the panel of my plane. I need to wire all of them to the same dimmer, see the diagram on page 4 of the attached AeroRockers Circuit Diagrams, specifically the red line to the PULSE-WIDTH DIMMER box. The switches have Faston tabs. Is there some clever way to wire this? Do I just build something with a Faston terminal at one end for the dimmer and then 10 wires coming out of it, all tied up into a bundle, each with another Faston terminal?

  -- Art Z.


--
https://CheerfulCurmudgeon.com/"If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel




<AeroRocker Circuit Diagrams.pdf>


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Eric Page



Joined: 15 Feb 2017
Posts: 241

PostPosted: Thu Dec 07, 2017 7:07 pm    Post subject: Re: Clever Wiring for Lamp Dimmer Reply with quote

How about using Bob's concept for power and ground buses based on a D-Sub connector, but use it to tie your switch illumination lines together? His example uses a DB-25 connector, but you could substitute a DB-15 since you need fewer pins.

http://aeroelectric.com/Pictures/Grounding/Minibus1.jpg

Get both male and female connectors. Bridge all of the pins together on one of them, then solder your wires to the solder cups on the other one. Mate the connectors and you've got a switch illumination bus.

Male: https://www.digikey.com/short/qqq39z

Female: https://www.digikey.com/short/qqq39m


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
ceengland7(at)gmail.com
Guest





PostPosted: Thu Dec 07, 2017 9:02 pm    Post subject: Clever Wiring for Lamp Dimmer Reply with quote

On 12/7/2017 7:06 PM, Art Zemon wrote:

Quote:
Folks,


I have ten backlit switches in the panel of my plane. I need to wire all of them to the same dimmer, see the diagram on page 4 of the attached AeroRockers Circuit Diagrams, specifically the red line to the PULSE-WIDTH DIMMER box. The switches have Faston tabs. Is there some clever way to wire this? Do I just build something with a Faston terminal at one end for the dimmer and then 10 wires coming out of it, all tied up into a bundle, each with another Faston terminal?



    -- Art Z.




--
https://CheerfulCurmudgeon.com/ "If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel





That would work fine, or for wiring convenience, you could do multiple joints using the same technique. Say, 3 in the 1st faston, and 3 or 4 into a butt splice on the end of each of the 1st 3.
Virus-free. www.avast.com [url=#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
bob.verwey(at)gmail.com
Guest





PostPosted: Thu Dec 07, 2017 9:53 pm    Post subject: Clever Wiring for Lamp Dimmer Reply with quote

Question from a neophyte....does the dimmer not create some kind of electrical "noise"?

Best...Bob Verwey

082 331 2727
[img]https://docs.google.com/uc?export=download&id=0B5d7rgAInTuTUUZsUjY4QmJsdVU&revid=0B5d7rgAInTuTdDJDaXRFZVh3b3lMa3FWL0s3MFdzc01YRlNvPQ[/img]



On 8 December 2017 at 07:06, Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:
Quote:
On 12/7/2017 7:06 PM, Art Zemon wrote:

Quote:
Folks,


I have ten backlit switches in the panel of my plane. I need to wire all of them to the same dimmer, see the diagram on page 4 of the attached AeroRockers Circuit Diagrams, specifically the red line to the PULSE-WIDTH DIMMER box. The switches have Faston tabs. Is there some clever way to wire this? Do I just build something with a Faston terminal at one end for the dimmer and then 10 wires coming out of it, all tied up into a bundle, each with another Faston terminal?



    -- Art Z.




--
https://CheerfulCurmudgeon.com/ "If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel





That would work fine, or for wiring convenience, you could do multiple joints using the same technique. Say, 3 in the 1st faston, and 3 or 4 into a butt splice on the end of each of the 1st 3.

Virus-free. www.avast.com [url=#m_1398500146610424097_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]



- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Fri Dec 08, 2017 11:16 am    Post subject: Clever Wiring for Lamp Dimmer Reply with quote

At 11:51 PM 12/7/2017, you wrote:
Quote:
Question from a neophyte....does the dimmer not create some kind of electrical "noise"?


Some do, most don't . . . but there is no 'general rule'


[img]cid:7.1.0.9.0.20171208131056.0580fd50(at)aeroelectric.com.0[/img]

Illumination feeders to multiple swithces
can be 'daisy cahined' with short segments
of wire crimped into the fast-ons as suggested
above.


Eric Jones offers a little dimmer assembly (noise
free) that would work nicely with this task.

https://goo.gl/ndNhX3





Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



3953a44.jpg
 Description:
 Filesize:  74.37 KB
 Viewed:  5201 Time(s)

3953a44.jpg


Back to top
art(at)zemon.name
Guest





PostPosted: Fri Dec 08, 2017 12:59 pm    Post subject: Clever Wiring for Lamp Dimmer Reply with quote

Thanks, everybody.
    -- Art Z.


--
https://CheerfulCurmudgeon.com/"If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group