Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Converting fixed pitch to constant speed

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
pilotdds(at)aol.com
Guest
PostPosted: Wed Sep 06, 2006 6:09 am    Post subject: Converting fixed pitch to constant speed Reply with quote
Could any of you folks knowledgable about the conversion advise me if external oil lines are necesary when making this conversion.My understanding is that the outside plug must be removed a 1/8 plug must be placed inside the crankshaft and external oil lines are necesary for rear mounte governors but not front mounted type. Is this correct? 728dd-flying

[quote][b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
coop85(at)bellsouth.net
Guest
PostPosted: Wed Sep 06, 2006 4:20 pm    Post subject: Converting fixed pitch to constant speed Reply with quote
I can’t help with the 1/8 plug, but you will need to remove the outside plug and there are no oil lines on a front mounted governor.

Marcus

Do not archive


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of pilotdds(at)aol.com
Sent: Wednesday, September 06, 2006 10:09 AM
To: rv10-list(at)matronics.com
Subject: Converting fixed pitch to constant speed


Could any of you folks knowledgable about the conversion advise me if external oil lines are necesary when making this conversion.My understanding is that the outside plug must be removed a 1/8 plug must be placed inside the crankshaft and external oil lines are necesary for rear mounte governors but not front mounted type. Is this correct? 728dd-flying


Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
0
Quote:
1
Quote:
2
Quote:
3
[quote][b]

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
pilotdds(at)aol.com
Guest
PostPosted: Thu Sep 07, 2006 7:44 am    Post subject: Converting fixed pitch to constant speed Reply with quote
thanks for the info


--

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group