 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
cjhukill(at)cox.net
Guest
|
 Posted: Fri Jun 09, 2006 7:57 am Post subject: finishing kit ommisions |
 |
|
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
Tdawson(at)avidyne.com
Guest
|
| Posted: Fri Jun 09, 2006 8:17 am Post subject: finishing kit ommisions |
|
|
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris Hukill
Sent: Friday, June 09, 2006 11:58 AM
To: rv10-list(at)matronics.com
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Tim(at)MyRV10.com
Guest
|
| Posted: Fri Jun 09, 2006 9:02 am Post subject: finishing kit ommisions |
|
|
Absolutely. Then everyone can just look it up.
I did some updating today of the paint tips to include something sent to
me by Rick Sked, regarding where to paint the cabin if you're getting
Abby's interior: http://www.myrv10.com/tips/painting.html
Also, just got some air-to-air photos posted from last night.
http://www.myrv10.com/N104CD/flights/20060608/index.html
Tim Olson - RV-10 N104CD - Flying
do not archive
Tim Dawson-Townsend wrote:
| Quote: | I bet if you scan the list, Tim O will be happy to post it on his
website . . .
TDT
40025
FF
------------------------------------------------------------------------
*From:* owner-rv10-list-server(at)matronics.com
[mailto:owner-rv10-list-server(at)matronics.com] *On Behalf Of *Chris Hukill
*Sent:* Friday, June 09, 2006 11:58 AM
*To:* rv10-list(at)matronics.com
*Subject:* finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing
kit. I previously had her send me an inventory list of the kit, so I
knew what was there. As I want to leave my options open for a James
cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and
core, and all the spinner parts (7 items). I also omitted the tires and
tubes, as I like the leakguard tubes and better tires. If anyone wants
the actual part numbers of the cowl / spinner parts to omit, I would be
happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rvbuilder(at)sausen.net
Guest
|
| Posted: Fri Jun 09, 2006 9:48 am Post subject: finishing kit ommisions |
|
|
Here is the IO-540 & Finish kit contents. I don't have the stuff crossed out but it is basically what Chris listed below. I plan on putting together a list of exclusion items based on my engine config once I get to that point. My engine is the BPA IO-540-X with the cold air induction. I will be using the special James cowl (for the cold air induction) and also their plenum.
Michael Sausen
RV-10 #352 Working on Fuselage
Do Not Archive
Recent RV-10 Build Activity
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Tim Dawson-Townsend
Sent: Friday, June 09, 2006 11:16 AM
To: rv10-list(at)matronics.com
Subject: RE: finishing kit ommisions
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris Hukill
Sent: Friday, June 09, 2006 11:58 AM
To: rv10-list(at)matronics.com
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
Download |
| Filename: |
Finish_Kit_and_IO-540_FF.pdf |
| Filesize: |
242.59 KB |
| Downloaded: |
197 Time(s) |
|
|
| Back to top |
|
|
etekberg(at)gmail.com
Guest
|
| Posted: Fri Jun 09, 2006 10:29 am Post subject: finishing kit ommisions |
|
|
Is that a 300hp engine? Is that fuel injected? Can you use that cowling with fuel injection? Are you concerned with exceeding Van's Vne at altitude? Sorry for all the questions, just trying to learn.
---
Eric Ekberg
RV-10 583 - Empennage
On 6/9/06, RV Builder (Michael Sausen) <rvbuilder(at)sausen.net (rvbuilder(at)sausen.net)> wrote: | Quote: | Here is the IO-540 & Finish kit contents. I don't have the stuff crossed out but it is basically what Chris listed below. I plan on putting together a list of exclusion items based on my engine config once I get to that point. My engine is the BPA IO-540-X with the cold air induction. I will be using the special James cowl (for the cold air induction) and also their plenum.
Michael Sausen
RV-10 #352 Working on Fuselage
Do Not Archive
Recent RV-10 Build Activity
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Tim Dawson-Townsend
Sent: Friday, June 09, 2006 11:16 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RE: finishing kit ommisions
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Chris Hukill
Sent: Friday, June 09, 2006 11:58 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Tim(at)MyRV10.com
Guest
|
| Posted: Fri Jun 09, 2006 10:35 am Post subject: finishing kit ommisions |
|
|
For those who get the digest version, and for other references,
I've added Michael's file here:
http://www.myrv10.com/tips/kits/index.html
along with other kit parts lists I've had posted there.
Back-up one level for the tips index:
http://www.myrv10.com/tips/index.html
If anyone ever has any updates to contribute, that would be
great. It would be nice to have someone's packing list
info for all the various kits shipping today.
Tim Olson - RV-10 N104CD - Flying
do not archive
RV Builder (Michael Sausen) wrote:
| Quote: | Here is the IO-540 & Finish kit contents. I don't have the stuff
crossed out but it is basically what Chris listed below. I plan on
putting together a list of exclusion items based on my engine config
once I get to that point. My engine is the BPA IO-540-X with the cold
air induction. I will be using the special James cowl (for the cold air
induction) and also their plenum.
Michael Sausen
RV-10 #352 Working on Fuselage
Do Not Archive
Recent RV-10 Build Activity
<http://www.mykitlog.com/display_project.php?project_id=22>
------------------------------------------------------------------------
*From:* owner-rv10-list-server(at)matronics.com
[mailto:owner-rv10-list-server(at)matronics.com] *On Behalf Of *Tim
Dawson-Townsend
*Sent:* Friday, June 09, 2006 11:16 AM
*To:* rv10-list(at)matronics.com
*Subject:* RE: finishing kit ommisions
I bet if you scan the list, Tim O will be happy to post it on his
website . . .
TDT
40025
FF
------------------------------------------------------------------------
*From:* owner-rv10-list-server(at)matronics.com
[mailto:owner-rv10-list-server(at)matronics.com] *On Behalf Of *Chris Hukill
*Sent:* Friday, June 09, 2006 11:58 AM
*To:* rv10-list(at)matronics.com
*Subject:* finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing
kit. I previously had her send me an inventory list of the kit, so I
knew what was there. As I want to leave my options open for a James
cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and
core, and all the spinner parts (7 items). I also omitted the tires and
tubes, as I like the leakguard tubes and better tires. If anyone wants
the actual part numbers of the cowl / spinner parts to omit, I would be
happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rvbuilder(at)sausen.net
Guest
|
| Posted: Fri Jun 09, 2006 12:48 pm Post subject: finishing kit ommisions |
|
|
It’s the 260HP Lycoming IO-540 “experimental” engine. No real mods to it other than 9-1 pistons and Allen’s cold air induction. Don’t forget Lycoming offers a, more expensive and heavier, cold air induction so this really isn’t anything out of the ordinary. The “I” in IO-540 means it is fuel injected. I will have the Airflow Performance FMS-300 injector system and dual Lightspeed III electronic ignition which are also very popular in the experimental world.
Will James is making two different cowls for the RV-10. One fits the stock 540 and the other fits the 540 with the cold air induction. They both will fit on injected engines but the plenum may need a tiny bump in the top for the AFP purge valve.
VNE isn’t an issue for me. For one I am probably going to do a three blade MT prop and for two I have the go fast/slow knob to keep me from breaking the speed of light. As for HP, we will see. I seriously doubt it will be anywhere close to 300HP. Especially with the chastising Allen give's me about using dual LSE III ignitions. He sees better HP out of mags on the dyno. 
Michael Sausen
RV-10 #352 Working on Fuselage
Do Not Archive
Recent RV-10 Build Activity
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Eric Ekberg
Sent: Friday, June 09, 2006 1:29 PM
To: rv10-list(at)matronics.com
Subject: Re: finishing kit ommisions
Is that a 300hp engine? Is that fuel injected? Can you use that cowling with fuel injection? Are you concerned with exceeding Van's Vne at altitude? Sorry for all the questions, just trying to learn.
---
Eric Ekberg
RV-10 583 - Empennage
On 6/9/06, RV Builder (Michael Sausen) <rvbuilder(at)sausen.net (rvbuilder(at)sausen.net)> wrote:
Here is the IO-540 & Finish kit contents. I don't have the stuff crossed out but it is basically what Chris listed below. I plan on putting together a list of exclusion items based on my engine config once I get to that point. My engine is the BPA IO-540-X with the cold air induction. I will be using the special James cowl (for the cold air induction) and also their plenum.
Michael Sausen
RV-10 #352 Working on Fuselage
Do Not Archive
Recent RV-10 Build Activity
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Tim Dawson-Townsend
Sent: Friday, June 09, 2006 11:16 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: RE: finishing kit ommisions
I bet if you scan the list, Tim O will be happy to post it on his website . . .
TDT
40025
FF
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)] On Behalf Of Chris Hukill
Sent: Friday, June 09, 2006 11:58 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
gorejr(at)bellsouth.net
Guest
|
| Posted: Thu Jun 15, 2006 2:38 pm Post subject: finishing kit ommisions |
|
|
Chris,
If you would fax me a list I would appreciate it. I am also planning on using James wheel pants. Thanks again! 770-412-0540
| Quote: |
From: "Chris Hukill" <cjhukill(at)cox.net>
Date: 2006/06/09 Fri AM 11:58:26 EDT
To: <rv10-list(at)matronics.com>
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
gorejr(at)bellsouth.net
Guest
|
| Posted: Thu Jun 29, 2006 9:48 am Post subject: finishing kit ommisions |
|
|
Chris,
Could you please re-fax the list of the things you are going to omit. Just got the laptop working again! I am going to get wheel pants from James also. I saw them at Lakeland. Thanks!!! Jim Gore
| Quote: |
From: "Chris Hukill" <cjhukill(at)cox.net>
Date: 2006/06/09 Fri AM 11:58:26 EDT
To: <rv10-list(at)matronics.com>
Subject: finishing kit ommisions
I just sent Barb at Vans a list of the items to omit from my finishing kit. I previously had her send me an inventory list of the kit, so I knew what was there. As I want to leave my options open for a James cowl, I omitted the cowl top, bottom, left/ right inlets, oil door and core, and all the spinner parts (7 items). I also omitted the tires and tubes, as I like the leakguard tubes and better tires. If anyone wants the actual part numbers of the cowl / spinner parts to omit, I would be happy to fax the list, and save you and Vans the trouble.
Chris Hukill
completing Andair installation
702 591-7551 cel
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
