Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Secure connection to a diode? (CORRECTED LINK)

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
nuckollsr(at)cox.net
Guest





PostPosted: Fri Jan 12, 2007 4:03 pm    Post subject: Secure connection to a diode? (CORRECTED LINK) Reply with quote

At 02:30 PM 1/11/2007 -0600, you wrote:

Quote:

<nuckollsr(at)cox.net>

At 11:50 AM 1/11/2007 -0500, you wrote:

>
><dennis.glaeser(at)eds.com>
>
>When I have multiple wires at one Faston connection, I use the
>appropriate (bigger) size and put both (or all 3) wires in the connector
>and crimp them all together. B&C does that for the diodes they install
>on their contactors, so I figured it must be OK. I think Bob even has a
>cartoon on how to do that on his website.

Yes. See . . .

http://www.aeroelectric.com/Pictures/Wiring_Technique/Wire_treatment_3.jpg

>If the pin connectors are big enough (i.e. Molex) you could do that as
>well, but D-Sub size pins are too small - you'd have to join the wires
>with a faston size splice with the multiple wires in one end and a
>single wire (maybe doubled over) out to the pin.

I've not had very good luck with multiple wires into
anything except the old MS3100 series solder-pot connectors.
Crimping multiple wires into connector pins is problematic.

>I've got 3 individual diodes that have to be wired between micro
>switches and pin connectors and the gear switch and valves with
>fast-ons, etc.

>How do you connect the ends coming out of each side of the diode
>to 20 AWG wire? Is there a connector out there for that? Two
>of the diodes have multiple (2) connections on each end.
>
>Needless to say.I'm a wiring newbie!

Jon it's not clear from your text as to the exact
nature of your task. Can you scan a sketch of the wiring
diagram and attach it to a reply? I 'think' I know
what you're dealing with but a schematic would help
me be more specific and useful.

Bob . . .

---------------------------------------------------------
< What is so wonderful about scientific truth...is that >
< the authority which determines whether there can be >
< debate or not does not reside in some fraternity of >
< scientists; nor is it divine. The authority rests >
< with experiment. >
< --Lawrence M. Krauss >
---------------------------------------------------------


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group