 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jonboede(at)hotmail.com
Guest
|
 Posted: Fri Jan 13, 2023 10:37 pm Post subject: central tank fuel drain question |
 |
|
I've looked in the parts catalogs for the CJ and haven't found one that shows the bottom of the central fuel collection tank.
On the bottom of that tank there's a cap with a 36mm nut and through the center of that nut is a 15-20mm drain device, the top of which presses against the hole in the bottom of the central tank.
On my tank that drain device is metal-on-metal with the central tank.
I strongly suspect that there was some kind of gasket or rubber washer between the drain device and the central tank.
Any ideas on what material that gasket/washer should be? Or what I should replace it with? Cork? Rubber? I'm thinking I can go with a 1-2mm Neoprene washer, or some of that blue gasket 1/16". Which would be a better material?
Thanks,
Jon
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
Mark Pennington
Joined: 18 Jul 2022
Posts: 9
Location: Richmond Virginia
|
| Posted: Sat Jan 14, 2023 1:38 am Post subject: central tank fuel drain question |
|
|
Jon
You are correct there is a round gasket in the bottom of the consumption tank. When I went through mine I got a new one from Doug.Â
I would reach out to Carl who has the parts business now. I am sure be has one.  If not you cut one from any suitable material for AV gas. Â
I put a photo of my old one as I removed it from the tank. You can download it and blow it up to see the thickness. It is pretty thick.Â
Mark Pennington
N621CJ
[img]cid:185afa1e290c47b222f1[/img]
On Sat, Jan 14, 2023 at 1:41 AM Jon Boede <jonboede(at)hotmail.com (jonboede(at)hotmail.com)> wrote:
| Quote: | I've looked in the parts catalogs for the CJ and haven't found one that shows the bottom of the central fuel collection tank.
On the bottom of that tank there's a cap with a 36mm nut and through the center of that nut is a 15-20mm drain device, the top of which presses against the hole in the bottom of the central tank.
On my tank that drain device is metal-on-metal with the central tank.
I strongly suspect that there was some kind of gasket or rubber washer between the drain device and the central tank.
Any ideas on what material that gasket/washer should be? Or what I should replace it with? Cork? Rubber? I'm thinking I can go with a 1-2mm Neoprene washer, or some of that blue gasket 1/16". Which would be a better material?
Thanks,
Jon
|
--
Replied from my iPhone. Please excuse brevity any typos in the content
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
635.32 KB |
| Viewed: |
2515 Time(s) |
|
_________________
Responding from my iPhone, please disregard any typos. |
|
| Back to top |
|
|
Ttail
Joined: 24 Jun 2013
Posts: 118
|
| Posted: Sat Jan 14, 2023 12:49 pm Post subject: Re: central tank fuel drain question |
|
|
Another view.
I got one of these gaskets from Doug a while ago. Yet to be installed. Next visit to the hangar I will measure it.
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
75.67 KB |
| Viewed: |
2507 Time(s) |
|
_________________
Sean Trestrail
ttail[at]internode.on.net |
|
| Back to top |
|
|
Ttail
Joined: 24 Jun 2013
Posts: 118
|
| Posted: Sun Jan 15, 2023 8:43 pm Post subject: Re: central tank fuel drain question |
|
|
Images of a new Fuel tank Drain gasket.
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
184.6 KB |
| Viewed: |
2473 Time(s) |
|
_________________
Sean Trestrail
ttail[at]internode.on.net |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
