Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Soft start

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List
View previous topic :: View next topic  
Author Message
dpark



Joined: 25 Sep 2013
Posts: 30
Location: Heald Green

PostPosted: Sat Sep 19, 2020 8:33 am    Post subject: Soft start Reply with quote

I have just fitted two new soft start modules to my Rotax 912ULS. Should they both be activated by the start switch and start on both modules. or select only one module to start then activate the second by going to both. I have only wired up one module at the moment but have installed wire to be used from the second module if it is ok to do so.?
Any experts out there?
G-LDVO

Dave Park

Dave Park


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

_________________
Dave Park G-LDVO Europa XS Trike 912uls
Back to top
View user's profile Send private message Send e-mail
Guy Buchanan



Joined: 16 Jul 2006
Posts: 1204
Location: Ramona, CA

PostPosted: Sat Sep 19, 2020 10:33 am    Post subject: Soft start Reply with quote

No expert, but I started on one.

Guy Buchanan
Ramona, CA
Deceased Kitfox IV-1200 / 912-S / Warp 3cs / 600 hrs
Glider pilot, too

On 9/19/2020 9:32 AM, david park wrote:
Quote:


I have just fitted two new soft start modules to my Rotax 912ULS. Should they both be activated by the start switch and start on both modules. or select only one module to start then activate the second by going to both. I have only wired up one module at the moment but have installed wire to be used from the second module if it is ok to do so.?
Any experts out there?
G-LDVO

Dave Park

Dave Park



- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

_________________
Guy Buchanan
Deceased K-IV 1200
A glider pilot too.
Back to top
View user's profile Send private message Send e-mail
Griffo



Joined: 18 Mar 2021
Posts: 70
Location: The Oaks, NSW, Australia

PostPosted: Sat May 08, 2021 9:12 pm    Post subject: Re: Soft start Reply with quote

Again - no expert - From my understanding, the suggestion to start on one module, predates the introduction of "Soft Start" (SS) . It was a potential way of achieving a soft start.

The fitting of the SS system (2 modules & a flywheel) should remove the need for this obsolete technique (if it ever had any effect).


- The Matronics RotaxEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RotaxEngines-List

_________________
46
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RotaxEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group