Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

914 Servo Problem -- broken copper wiper -- is there a fix?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
budyerly@msn.com



Joined: 05 Oct 2019
Posts: 280
Location: Florida USA

PostPosted: Sat Mar 20, 2021 4:32 pm    Post subject: 914 Servo Problem -- broken copper wiper -- is there a fix? Reply with quote

Paul,
No, not this specifically.
I had a wiper wear through and begin to hesitate. $500 and I was flying again.
Check ebay as there are usually a few on there. Typically about $150-$250 and good for parts or sometimes good for a replacement. But check the part number.
The Skido Rotax 914 marine engine used the same servo but you don't normally see these for sale.

Best Regards,
Bud Yerly

--


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Gilles



Joined: 16 May 2020
Posts: 33

PostPosted: Tue Mar 23, 2021 2:43 pm    Post subject: 914 Servo Problem -- broken copper wiper -- is there a fix? Reply with quote

Le 21/03/2021 à 00:00, PCahill a écrit :

Quote:
Quote:
--> Europa-List message posted by: "PCahill" <cahillpa(at)gmail.com> (cahillpa(at)gmail.com)
Has anyone else seen this? Can I buy a gear with the copper wipers, or maybe just the wipers themselves? This happened suddenly: 2 weekends ago everything was perfect, last weekend -- blinking light. This weekend -- disassemble until problem found. I can't imagine that I'm the only one with what amounts to a potentiometer with a bad wiper. This is certainly not a $500 failure (cost of new servo). Thanks.



N914TX,

Interesting damage indeed ! Thanks for sharing.

The good news is, the servo is a motorcycle unit which can be bought new or second-hand for just a few bucks.

We got the info from an autogyro forum expert and bought one just to have a look. We may still have it somewhere.
If you're interested I could research the exact brand and model of motor bike.
FWIW
--
Best regards,
Gilles
http://contrails.free.fr
http://lapierre.skunkworks.free.fr


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Best regards,
Gilles
http://contrails.free.fr
Back to top
View user's profile Send private message Visit poster's website
PCahill



Joined: 05 Feb 2018
Posts: 6

PostPosted: Tue Mar 23, 2021 5:33 pm    Post subject: Re: 914 Servo Problem -- broken copper wiper -- is there a Reply with quote

Gilles,

I think everyone on this list would benefit from knowing about an equivalent motorcycle servo for a lot less cash! I looked myself for such a part... no joy!

More information... Ronnie at www.flysmla.com is checking his stock of used servos. Perhaps he can provide me with a serviceable part.

I also understand now that there is a '912 914 buy sell trade' group on Facebook. I have not confirmed this, yet FB may be another good source of used parts.

More details... when I wrote "copper" wipers in my original post, I should have written "copper-colored" wipers. The wiper is likely a copper alloy, maybe Cu-Be, maybe Cu-Ni, maybe Cu-Ni-Sn, or maybe a thousand other possibilities. Therefore I am shying away from repair of the metal wiper itself.

Thanks!

Paul


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
N914TX
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group