Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Compressor shea couplings

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
GeorgeCoy



Joined: 02 Dec 2010
Posts: 308

PostPosted: Tue Dec 01, 2020 7:04 am    Post subject: Compressor shea couplings Reply with quote

For General info:
The shear pins of the coupling of the air compressor are manufactured in two dimensions:
  • 3 millimeters on diameter for the shear pin p/n 14-611-252;
  • 3.5 millimeters on diameter for the shear pin p/n 14-611-252-01.

Please note this coupling is a fuse and the shear torque has to be 22 kgf-m or 159 lbf-ft. If pins with bigger diameter are installed then at overload this fuse will not protect the gears of the engine. We strongly recommend installing pins with maximum 3.5 millimeters on diameter. In order to do this it is sometimes necessary to make new holes in coupling, with the diameter between 3.5 and 3.518 millimeters (of course reamed holes).

George Coy


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message Send e-mail
richard.goode(at)russiana
Guest





PostPosted: Tue Dec 01, 2020 7:49 am    Post subject: Compressor shea couplings Reply with quote

George – absolutely correct. And of course the pins need to be of the right material which will shear when overloaded!


RICHARD GOODE AEROBATICS
Rhodds Farm, Lyonshall, Hereford, HR5 3LW, UK
Tel: +44 (0)1544 340120 Fax: +44 (0)1544 340129
e-mail: richard.goode(at)russianaeros.com (richard.goode(at)russianaeros.com)
www.russianaeros.com
WORLD LEADERS IN RUSSIAN SPORTING AIRCRAFT & ENGINES
In partnership with Aerometal Kft, Hungary.


From: owner-yak-list-server(at)matronics.com <owner-yak-list-server(at)matronics.com> On Behalf Of George
Sent: 01 December 2020 15:02
To: yak-list(at)matronics.com
Subject: Compressor shea couplings

For General info:
The shear pins of the coupling of the air compressor are manufactured in two dimensions:
  • 3 millimeters on diameter for the shear pin p/n 14-611-252;
  • 3.5 millimeters on diameter for the shear pin p/n 14-611-252-01.

Please note this coupling is a fuse and the shear torque has to be 22 kgf-m or 159 lbf-ft. If pins with bigger diameter are installed then at overload this fuse will not protect the gears of the engine. We strongly recommend installing pins with maximum 3.5 millimeters on diameter. In order to do this it is sometimes necessary to make new holes in coupling, with the diameter between 3.5 and 3.518 millimeters (of course reamed holes).

George Coy


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group