Matronics Email Lists :: View topic - Oil tank support bracket

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Oil tank support bracket

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

rlborger(at)mac.com
Guest

Posted: Wed Sep 30, 2020 6:03 pm Post subject: Oil tank support bracket

Steve,

You can find a copy of the oil bracket  drawing on the Europa Club website.



https://www.theeuropaclub.org/building/engine-and-fuel-system/rotax-912-and-914-engines



I hope this helps.



Blue skies & tailwinds,Bob BorgerEuropa XS Tri, Rotax 914, Airmaster C/S Prop.Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP, Hercules Prop.3705 Lynchburg Dr.Corinth, TX  76208-5331Cel: 817-992-1117rlborger(at)mac.com (rlborger(at)mac.com) 	  Quote: 	
		  On Sep 30, 2020, at 8:05 PM, Steve Ivell <SteveIvell(at)pestproof.co.uk (SteveIvell(at)pestproof.co.uk)> wrote:

Hi All

 

I need to make the oil tank bracket as shown in the build manual, which refers to a template but there isn’t one in the online version.

 

<image001.jpg>

 

Can anyone help please?

 

Kind Regards

 

Steve Ivell

G-STES

XS Tri – 90% built….90% left to do!!!!

Mob: 07971 128842

E-mail: steveivell(at)pestproof.co.uk (steveivell(at)pestproof.co.uk)

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

rparigoris

Joined: 24 Nov 2009
Posts: 780

Posted: Wed Sep 30, 2020 9:09 pm Post subject: Re: Oil tank support bracket

Hi Steve I sanded a radius on a piece of aluminium to make the radiused bend, clamped to a table and bending was easy. Here's some pics: https://1drv.ms/u/s!Ah1S270Nwg9Vyxc4F-HgDE4FK1mf?e=keZYF8 I used a combo tool to make 90 degree bend and the slip rollers to make the large radius. Ron P.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

n7188u

Joined: 15 Nov 2015
Posts: 395

Posted: Thu Oct 01, 2020 12:10 pm Post subject: Re: Oil tank support bracket

I was lucky that at work we had a small press brake like this one:



https://www.eastwood.com/eastwood-press-brake-attachment.html?gclid=CjwKCAjw_NX7BRA1EiwA2dpg0jDX8-W9VjCLjU9zezDWsllOo0D_HFVvArAxtvWUqrX4n9FTTJyG0hoCQLsQAvD_BwE



The one I used was not used with a press. It has a small lever to move the blade down. 



Not suggesting you buy one just for this bracket but boy did it make doing those tight bends easy. I also made the curve part with it. Bend a little, move 5mm bend a little again. Yes it ends up a little steppy but looks and works nice.



Best,

Chris

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum