Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

EIS

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
lcottrell



Joined: 29 May 2006
Posts: 1490
Location: Jordan Valley, Or

PostPosted: Sun Aug 09, 2020 5:32 pm    Post subject: EIS Reply with quote

Has anybody ever had a problem with their EIS showing false readings mostly concerning CHT's and every thing else, but not turning on the red warning light?
On my last flight with a passenger, over some really rough country and a long walk from civilization, the EIS went totally bonkers, about 40 minutes into the flight. There was no p[lace to land that we both could have gotten out of again, without walking, so I decided to fly it until it wouldn't go any more. Well it never got to that point, there was no sound to indicate that something had departed without us and the engine was running just as smooth as before, plus the warning light did not come on. I eventually decided that the problem was with the EIS rather than the engine, so we came on home.
I did a superficial check of grounds, and could see nothing obvious. This unit has a lot of hours on it as well as being about 10 years old. I haven't contacted Grand Rapids as yet, to see what they think. Just wondering if any one else had seen that problem.
Larry
--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
stuart(at)harnerfarm.net
Guest





PostPosted: Sun Aug 09, 2020 7:38 pm    Post subject: EIS Reply with quote

Sure sounds like a grounding issue. Could be a bugger to troubleshoot.

Did it act up all the way home or did it recover at some point?

Can you reproduce the symptoms on the ground with or without the engine running?

Were you able to determine the system voltage while this was going on?

Do you have a really good digital multi-meter or an oscilloscope?

Old adage from a farmer friend who restores tractors. “Check the grounds, check the grounds, check the grounds”.

I wonder could it have just been an issue with the LCD display. Heat and vibration make those things go whacky, but they usually don’t recover at all. Try pressing lightly all around the perimeter of the display and see if it changes anything.

Good luck,

Stuart

From: owner-kolb-list-server(at)matronics.com [mailto:owner-kolb-list-server(at)matronics.com] On Behalf Of Larry Cottrell
Sent: Sunday, August 09, 2020 8:31 PM
To: kolb-list(at)matronics.com
Subject: EIS

Has anybody ever had a problem with their EIS showing false readings mostly concerning CHT's and every thing else, but not turning on the red warning light?



On my last flight with a passenger, over some really rough country and a long walk from civilization, the EIS went totally bonkers, about 40 minutes into the flight. There was no p[lace to land that we both could have gotten out of again, without walking, so I decided to fly it until it wouldn't go any more. Well it never got to that point, there was no sound to indicate that something had departed without us and the engine was running just as smooth as before, plus the warning light did not come on. I eventually decided that the problem was with the EIS rather than the engine, so we came on home.



I did a superficial check of grounds, and could see nothing obvious. This unit has a lot of hours on it as well as being about 10 years old. I haven't contacted Grand Rapids as yet, to see what they think. Just wondering if any one else had seen that problem.

Larry



--
The older I get, the less tolerant I am of those who are intolerant of others.



If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group