 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
nuckolls.bob(at)aeroelect
Guest
|
 Posted: Mon Jul 15, 2019 6:35 am Post subject: BNC connectors - Types of cable and installation tools |
 |
|
At 06:00 PM 7/14/2019, you wrote:
| Quote: | --> AeroElectric-List message posted by: "Argonaut36" <fmlibrino(at)msn.com>
Could somebody kindly answer the following questions:
- Are BNC connectors for RG-58U wire and RG400U wire the same?
- Can the same crimpers be used for attaching BNC connectors to both RG-58U wire and RG400U wire? If so, why you can only read ‘58’ on some dye sets and not ‘58/400’ or something like that?
- What about TNC connectors? Do the same principles as for BNC connectors apply when it comes to RG58/RG400 cables and installation tools? |
BNC and TNC connectors are crimped with
the same hex dies. 0.213 for the shield
and 0.068 for the center conductor.
As indicated in this ad:
https://tinyurl.com/y5poy9dc
[img]cid:7.1.0.9.0.20190714210030.06111f70(at)aeroelectric.com.0[/img]
All coax types listed are 0.195" nominal
o.d. and will install on the same connector
Bob . . .
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
| Description: |
|
| Filesize: |
86.92 KB |
| Viewed: |
1478 Time(s) |
|
|
|
| Back to top |
|
 |
nuckolls.bob(at)aeroelect
Guest
|
| Posted: Mon Jul 15, 2019 7:11 am Post subject: BNC connectors - Types of cable and installation tools |
|
|
At 06:00 PM 7/14/2019, you wrote:
| Quote: | --> AeroElectric-List message posted by: "Argonaut36" <fmlibrino(at)msn.com>
Could somebody kindly answer the following questions:
- Are BNC connectors for RG-58U wire and RG400U wire the same?
- Can the same crimpers be used for attaching BNC connectors to both RG-58U wire and RG400U wire? If so, why you can only read ‘58’ on some dye sets and not ‘58/400’ or something like that?
- What about TNC connectors? Do the same principles as for BNC connectors apply when it comes to RG58/RG400 cables and installation tools? |
BNC and TNC connectors are crimped with
the same hex dies. 0.213 for the shield
and 0.068 for the center conductor.
As indicated in this ad:
https://tinyurl.com/y5poy9dc
[img]cid:7.1.0.9.0.20190715101023.0232e890(at)aeroelectric.com.1[/img]
All coax types listed are 0.195" nominal
o.d. and will install on the same connector
Bob . . .
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
| Description: |
|
| Filesize: |
86.92 KB |
| Viewed: |
1476 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
