Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

S700-2-50 switch

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
pelletie1959(at)me.com
Guest





PostPosted: Thu Apr 11, 2019 3:23 pm    Post subject: S700-2-50 switch Reply with quote

Hi,

I perform the Z-16 diagram from Bob and I use the S700-2-50 switch suggest by Bob to light the ignition and the starter contactor. I have some problems with the wiring of that switch. Somebody have a wiring diagram for that switch. And is it possible to get the same result with the S700-2-51 switch which have only 4 poles.

Daniel Pelletier


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
user9253



Joined: 28 Mar 2008
Posts: 1900
Location: Riley TWP Michigan

PostPosted: Thu Apr 11, 2019 4:26 pm    Post subject: Re: S700-2-50 switch Reply with quote

Will this diagram help?
https://mid-8704.kxcdn.com/wp-content/uploads/2016/05/2-50-Typical-use-PMAG-POWER-TEST-drawing.pdf


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores
Back to top
View user's profile Send private message
pelletie1959(at)me.com
Guest





PostPosted: Fri Apr 12, 2019 9:46 am    Post subject: S700-2-50 switch Reply with quote

Not really,

I've yet thi diagram. Maybe I don't understand this diagram. When I flip the switch on the momentary, the starter contactor is on but the ignition is off. It doesn't make sense.

Daniel Pelletier

Envoyé de mon iPad

Quote:
Le 11 avr. 2019 à 20:26, user9253 <fransew(at)gmail.com> a écrit :



Will this diagram help?
https://mid-8704.kxcdn.com/wp-content/uploads/2016/05/2-50-Typical-use-PMAG-POWER-TEST-drawing.pdf

--------
Joe Gores




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=488676#488676











- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
user9253



Joined: 28 Mar 2008
Posts: 1900
Location: Riley TWP Michigan

PostPosted: Fri Apr 12, 2019 10:57 am    Post subject: Re: S700-2-50 switch Reply with quote

We need more information. Do you have a Rotax 912ULS engine?
If not, what engine?
Does it have magnetos?
Can you post a picture that shows how the wires are connected?
I would use 3 separate switches like diagram Z-20.
1 momentary switch for starting.
2 separate ignition switches.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores
Back to top
View user's profile Send private message
steerr(at)bellsouth.net
Guest





PostPosted: Fri Apr 12, 2019 11:11 am    Post subject: S700-2-50 switch Reply with quote

That's what I did for the Hirth 3202 on my Excalibur.  The two separate
ignition switches, and the pushbutton start switch, are wired so that
both ignition switches must be on for the start switch to work.
On 4/12/2019 2:57 PM, user9253 wrote:
Quote:


We need more information. Do you have a Rotax 912ULS engine?
If not, what engine?
Does it have magnetos?
Can you post a picture that shows how the wires are connected?
I would use 3 separate switches:
1 momentary switch for starting.
2 separate ignition switches.

--------
Joe Gores


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=488691#488691



---
This email has been checked for viruses by AVG.
https://www.avg.com


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
pelletie1959(at)me.com
Guest





PostPosted: Fri Apr 12, 2019 4:56 pm    Post subject: S700-2-50 switch Reply with quote

I have a 912 uls. I use this setup of switch at the suggestion of Bob, see note 2 in the Z16 diagram. But there is no pattern for that type of switch in the Z16 schema. If I can find the way to plug it, I will use a distinct start button and two separate switch for ignition.

Daniel Pelletier

Envoyé de mon iPad

Quote:
Le 12 avr. 2019 à 15:11, Bill Steer <steerr(at)bellsouth.net> a écrit :



That's what I did for the Hirth 3202 on my Excalibur. The two separate ignition switches, and the pushbutton start switch, are wired so that both ignition switches must be on for the start switch to work.


> On 4/12/2019 2:57 PM, user9253 wrote:
>
>
> We need more information. Do you have a Rotax 912ULS engine?
> If not, what engine?
> Does it have magnetos?
> Can you post a picture that shows how the wires are connected?
> I would use 3 separate switches:
> 1 momentary switch for starting.
> 2 separate ignition switches.
>
> --------
> Joe Gores
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=488691#488691
>
>
>
>
>
>
>
>
>
>

---
This email has been checked for viruses by AVG.
https://www.avg.com






- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
user9253



Joined: 28 Mar 2008
Posts: 1900
Location: Riley TWP Michigan

PostPosted: Fri Apr 12, 2019 7:10 pm    Post subject: Re: S700-2-50 switch Reply with quote

Below is a drawing showing how to connect ignition switches and start switch.

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



Ignition and Start.jpg
 Description:
 Filesize:  40.35 KB
 Viewed:  3704 Time(s)

Ignition and Start.jpg



_________________
Joe Gores
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group