Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

GS tailwheel rudder drive mod question.

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
peterz(at)zutrasoft.com
Guest





PostPosted: Mon Jan 28, 2019 12:37 pm    Post subject: GS tailwheel rudder drive mod question. Reply with quote

I was wondering if someone could confirm that the rudder’s drive bracket is positioned 47” from the top of the rudder to the center of the rod (i am not cutting the bottom, so the instuctions dont really apply without doing math Wink

Many thanks,
Pete
A239


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Kelvin Weston



Joined: 14 Apr 2010
Posts: 89
Location: Hampshire, UK

PostPosted: Tue Jan 29, 2019 10:36 am    Post subject: Re: GS tailwheel rudder drive mod question. Reply with quote

Hi Pete

If you put a straight edge on the tip and measure along the inside of the leading edge (next to the hinges), my rudder measures 48 inches from the straight edge to the centre of the pushrod bracket.

Similarly, if you put the bottom of the rudder on the floor and measure up the inside of the leading edge from the floor to the centre of the bracket it is 6 inches.

However, the bracket position is determined by the lower hinge position on the rudder. If you have that in the right place as shown in Chapter 2 of the Build Manual, you should be ok.

Hope this helps.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Regards

Kelv Weston
Kit 497
kelv@kdweston.co.uk
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group