Matronics Email Lists :: View topic - Drilling Mono LG bolt heads

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Drilling Mono LG bolt heads

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

n7188u

Joined: 15 Nov 2015
Posts: 395

Posted: Mon Oct 22, 2018 10:01 am Post subject: Drilling Mono LG bolt heads

Dear forum members,



My mono landing gear swing arm is done and I wanted to install it in the airplane. Looking at the manual I see the part about drilling the bolt heads. Yikes! That is something I really don't look forward to doing, with images in my brain of breaking tiny drill bits and having to order more bolts, etc. 



Does anyone remember if that was a pain to do, with a multitude of broken and stuck drill bits and the like? or are the bolts actually soft and not a big deal to drill?



Not to gripe but I really wonder why couldn't Europa supply pre-drilled bolts with the kits   



Chris

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

rlborger(at)mac.com
Guest

Posted: Mon Oct 22, 2018 10:52 am Post subject: Drilling Mono LG bolt heads

Chris,



This can be done with care if you wish.  



It can be a PITA with little broken bits and unusable bolts.



Unless you feel you really need to learn how to drill bolt heads, order the drilled head version from Aircraft Spruce or other vendor.



Not "Evil or Very Mad," just cheep.



Same with antennas.  Unless you feel the need to learn how to build and tune an antenna just buy one.  Quicker, easier and, when all is said and done, probably less expensive.



Just my 2Â¢, YMMV.



Blue skies & tailwinds,

Bob Borger

Europa XS Tri, Rotax 914, Airmaster C/S Prop (130 hrs).

Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP, Hercules Prop.

3705 Lynchburg Dr.

Corinth, TX  76208-5331

Cel: 817-992-1117

rlborger(at)mac.com



On Oct 22, 2018, at 1:01 PM, n7188u <chmgarb(at)gmail.com> wrote:






Dear forum members,



My mono landing gear swing arm is done and I wanted to install it in the airplane. Looking at the manual I see the part about drilling the bolt heads. Yikes! That is something I really don't look forward to doing, with images in my brain of breaking tiny drill bits and having to order more bolts, etc. 



Does anyone remember if that was a pain to do, with a multitude of broken and stuck drill bits and the like? or are the bolts actually soft and not a big deal to drill?



Not to gripe but I really wonder why couldn't Europa supply pre-drilled bolts with the kits  [Evil or Very Mad] 



Chris





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=483942#483942

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

budyerly(at)msn.com
Guest

Posted: Mon Oct 22, 2018 11:05 am Post subject: Drilling Mono LG bolt heads

Chris, 

Buy the drilled head AN bolts and save the aggravation.   

  

AAE antennas:  I have installed many.  I put them in the vertical fin and have put them on the stern post as well as just behind the baggage bay.  All have worked well. 

Don’t cut the AAE or anything, they work right out of the box. 

  

Technique, if putting on the aft side of the stern post, and cutting a hole into the post for the coil, make sure the rudder clears.   

  

Personally I put them on the inboard skin of the port side of the fin and simply cut a notch in the ribs to clear the antenna.   Run the coax through a couple of grommets and leave it alone after glue up.   Since the antenna doesn’t fail,  but anything can, a simple access hole in the fin can provide access or I just will cut a hole (premarked for the client if necessary) between the mid and top rib and reach in and unplug the coax connector if for some reason my BNC connector failed. 

  

Regards, 

Bud Yerly 

Custom Flight Creations, Inc. 

  

Sent from  Mail for Windows 10 

  

  From: owner-europa-list-server(at)matronics.com <owner-europa-list-server(at)matronics.com> on behalf of n7188u <chmgarb(at)gmail.com>

 Sent: Monday, October 22, 2018 2:01:33 PM

 To: europa-list(at)matronics.com

 Subject: Drilling Mono LG bolt heads  

 

 

  --> Europa-List message posted by: "n7188u" <chmgarb(at)gmail.com>

 

 Dear forum members,

 

 My mono landing gear swing arm is done and I wanted to install it in the airplane. Looking at the manual I see the part about drilling the bolt heads. Yikes! That is something I really don't look forward to doing, with images in my brain of breaking tiny drill  bits and having to order more bolts, etc. 

 

 Does anyone remember if that was a pain to do, with a multitude of broken and stuck drill bits and the like? or are the bolts actually soft and not a big deal to drill?

 

 Not to gripe but I really wonder why couldn't Europa supply pre-drilled bolts with the kits  [Evil or Very Mad] 

 

 Chris

 

 

 

 

 Read this topic online here:

 

 https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com%2Fviewtopic.php%3Fp%3D483942%23483942&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=c6rq0%2FbTOX%2FfuYAVT3tNfz5XpktbyA5vb9WVtOw7j9g%3D&amp;reserved=0

 

 

 

 

 

 

 ===========

 st Email Forum -

 ook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=npC3wa0JOketSa6mTAATkhPsnmn87G0SvIWJfmnkSuc%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=npC3wa0JOketSa6mTAATkhPsnmn87G0SvIWJfmnkSuc%3D&amp;reserved=0

 ===========

 p;   - MATRONICS WEB FORUMS -

 ook.com/?url=http%3A%2F%2Fforums.matronics.com&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=Vquih6U7ET4KXifD883X6R0vw0oOX9MbfW3csx8Oo3I%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=Vquih6U7ET4KXifD883X6R0vw0oOX9MbfW3csx8Oo3I%3D&amp;reserved=0

 ===========

 p;  - NEW MATRONICS LIST WIKI -

 ook.com/?url=http%3A%2F%2Fwiki.matronics.com&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=2HSQpc%2FqiRIIWztQEeWGW7LsfH3nxzhoQE19w7hEogE%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwiki.matronics.com&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=2HSQpc%2FqiRIIWztQEeWGW7LsfH3nxzhoQE19w7hEogE%3D&amp;reserved=0

 ===========

 p; - List Contribution Web Site -

 p;                  -Matt Dralle, List Admin.

 ook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=yzkAsarc8TR8r7XLkmMT9uRntNkbVTCcwQS%2FhyV4SE8%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=yzkAsarc8TR8r7XLkmMT9uRntNkbVTCcwQS%2FhyV4SE8%3D&amp;reserved=0

 ===========

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

n7188u

Joined: 15 Nov 2015
Posts: 395

Posted: Mon Oct 22, 2018 1:32 pm Post subject: Re: Drilling Mono LG bolt heads

Thanks for the Reply guys.



First, let me assure you I will buy the bolts if I find them. Those bolts are 5/16-18 and 2 1/4 inch long. I didn't find that size at ASC. The only drilled head bolts I found are AN75A-21 or MS20074-05-21. I will look more for them to see if I can find the four I need.



Regarding the antenna, I will follow your advice Bud and bond it to the fin. i assume you use the right angle connector version, is that right?



And don't worry, I'm not cutting it. AAE clearly states not to mess with their antenna 



Chris

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

budyerly(at)msn.com
Guest

Posted: Mon Oct 22, 2018 9:23 pm Post subject: Drilling Mono LG bolt heads

Yes on the antenna.

 

 

   Bud Yerly

 

  Custom Flight Creations

 

 

  From: owner-europa-list-server(at)matronics.com <owner-europa-list-server(at)matronics.com> on behalf of n7188u <chmgarb(at)gmail.com>

 Sent: Monday, October 22, 2018 2:32:24 PM

 To: europa-list(at)matronics.com

 Subject: Re: Drilling Mono LG bolt heads  

 

 

  --> Europa-List message posted by: "n7188u" <chmgarb(at)gmail.com>

 

 Thanks for the Reply guys.

 

 First, let me assure you I will buy the bolts if I find them. Those bolts are 5/16-18 and 2 1/4 inch long. I didn't find that size at ASC. The only drilled head bolts I found are AN75A-21 or MS20074-05-21. I will look more for them to see if I can find the  four I need.

 

 Regarding the antenna, I will follow your advice Bud and bond it to the fin. i assume you use the right angle connector version, is that right?

 

 And don't worry, I'm not cutting it. AAE clearly states not to mess with their antenna 

 

 Chris

 

 

 

 

 Read this topic online here:

 

 https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com%2Fviewtopic.php%3Fp%3D483955%23483955&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=lten6nXv%2BQqn6zBIoFBC%2BczHmMsZLcIyM%2FgQu1%2BbEII%3D&amp;reserved=0

 

 

 

 

 

 

 ===========

 st Email Forum -

 ook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=Y5e7ULnDHB4B4pXVW3QgqXclka5J%2BItF%2Fol8%2FSeGXxY%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=Y5e7ULnDHB4B4pXVW3QgqXclka5J%2BItF%2Fol8%2FSeGXxY%3D&amp;reserved=0

 ===========

 p;   - MATRONICS WEB FORUMS -

 ook.com/?url=http%3A%2F%2Fforums.matronics.com&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=KObI9IG%2FI%2FTifcpCEYC0vyG67yMxSERXrPlv6a2lR5Q%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=KObI9IG%2FI%2FTifcpCEYC0vyG67yMxSERXrPlv6a2lR5Q%3D&amp;reserved=0

 ===========

 p;  - NEW MATRONICS LIST WIKI -

 ook.com/?url=http%3A%2F%2Fwiki.matronics.com&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=jKSLdjE11vA69o0mTpm6GPyoDCDw1vAr8vlLLa1cGbU%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwiki.matronics.com&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=jKSLdjE11vA69o0mTpm6GPyoDCDw1vAr8vlLLa1cGbU%3D&amp;reserved=0

 ===========

 p; - List Contribution Web Site -

 p;                  -Matt Dralle, List Admin.

 ook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=DhzoJsTFJJHRT96V8GW1khHEIUhXylJDrfsIx%2FOvTL8%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&amp;data=02%7C01%7C%7Cdd3eaacdb49446f00f3508d6386651f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758409439034643&amp;sdata=DhzoJsTFJJHRT96V8GW1khHEIUhXylJDrfsIx%2FOvTL8%3D&amp;reserved=0

 ===========

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

n7188u

Joined: 15 Nov 2015
Posts: 395

Posted: Tue Oct 23, 2018 2:53 am Post subject: Re: Drilling Mono LG bolt heads

Thanks!

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

roddyeuropa(at)aol.com
Guest

Posted: Tue Oct 23, 2018 5:19 am Post subject: Drilling Mono LG bolt heads

A comment on drilling the bolts, if you do choose to. I found that it was far easier if using a cutting lubricant – brand I use is Rocol (ROC53020 RTD). I found this out when drilling my bolts, and have since used the compound whenever I drill metal, and it is far, far easier. One tube also goes a long way.

Roddy Kesterton

G-IKRK

 

From: owner-europa-list-server(at)matronics.com <owner-europa-list-server(at)matronics.com> On Behalf Of Bud Yerly

Sent: 22 October 2018 20:05

To: europa-list(at)matronics.com

Subject: RE: Drilling Mono LG bolt heads

 

Chris,

Buy the drilled head AN bolts and save the aggravation.  

 

AAE antennas:  I have installed many.  I put them in the vertical fin and have put them on the stern post as well as just behind the baggage bay.  All have worked well.

Don’t cut the AAE or anything, they work right out of the box.

 

Technique, if putting on the aft side of the stern post, and cutting a hole into the post for the coil, make sure the rudder clears.  

 

Personally I put them on the inboard skin of the port side of the fin and simply cut a notch in the ribs to clear the antenna.   Run the coax through a couple of grommets and leave it alone after glue up.   Since the antenna doesn’t fail, but anything can, a simple access hole in the fin can provide access or I just will cut a hole (premarked for the client if necessary) between the mid and top rib and reach in and unplug the coax connector if for some reason my BNC connector failed.

 

Regards,

Bud Yerly

Custom Flight Creations, Inc.

 

Sent from Mail for Windows 10

 

From: owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com) <owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)> on behalf of n7188u <chmgarb(at)gmail.com (chmgarb(at)gmail.com)>

Sent: Monday, October 22, 2018 2:01:33 PM

To: europa-list(at)matronics.com (europa-list(at)matronics.com)

Subject: Drilling Mono LG bolt heads 

 



--> Europa-List message posted by: "n7188u" <chmgarb(at)gmail.com (chmgarb(at)gmail.com)>



Dear forum members,



My mono landing gear swing arm is done and I wanted to install it in the airplane. Looking at the manual I see the part about drilling the bolt heads. Yikes! That is something I really don't look forward to doing, with images in my brain of breaking tiny drill bits and having to order more bolts, etc. 



Does anyone remember if that was a pain to do, with a multitude of broken and stuck drill bits and the like? or are the bolts actually soft and not a big deal to drill?



Not to gripe but I really wonder why couldn't Europa supply pre-drilled bolts with the kits  [Evil or Very Mad] 



Chris





Read this topic online here:



https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com%2Fviewtopic.php%3Fp%3D483942%23483942&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=c6rq0%2FbTOX%2FfuYAVT3tNfz5XpktbyA5vb9WVtOw7j9g%3D&amp;reserved=0

===========

st Email Forum -

ook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=npC3wa0JOketSa6mTAATkhPsnmn87G0SvIWJfmnkSuc%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2FNavigator%3FEuropa-List&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=npC3wa0JOketSa6mTAATkhPsnmn87G0SvIWJfmnkSuc%3D&amp;reserved=0

===========

p;   - MATRONICS WEB FORUMS -

ook.com/?url=http%3A%2F%2Fforums.matronics.com&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=Vquih6U7ET4KXifD883X6R0vw0oOX9MbfW3csx8Oo3I%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fforums.matronics.com&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=Vquih6U7ET4KXifD883X6R0vw0oOX9MbfW3csx8Oo3I%3D&amp;reserved=0

===========

p;  - NEW MATRONICS LIST WIKI -

ook.com/?url=http%3A%2F%2Fwiki.matronics.com&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=2HSQpc%2FqiRIIWztQEeWGW7LsfH3nxzhoQE19w7hEogE%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwiki.matronics.com&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=2HSQpc%2FqiRIIWztQEeWGW7LsfH3nxzhoQE19w7hEogE%3D&amp;reserved=0

===========

p; - List Contribution Web Site -

p;                  -Matt Dralle, List Admin.

ook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=yzkAsarc8TR8r7XLkmMT9uRntNkbVTCcwQS%2FhyV4SE8%3D&amp;reserved=0"> https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.matronics.com%2Fcontribution&amp;data=02%7C01%7C%7C7641e756ad884f670f3f08d638490493%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636758283585284851&amp;sdata=yzkAsarc8TR8r7XLkmMT9uRntNkbVTCcwQS%2FhyV4SE8%3D&amp;reserved=0

===========

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

n7188u

Joined: 15 Nov 2015
Posts: 395

Posted: Wed Oct 24, 2018 7:14 am Post subject: Re: Drilling Mono LG bolt heads

Thanks again. I assembled the landing gear into the airplane yesterday. Will catalog the bolts needed and see what I find already drilled. Will then decide what to do about the hard ones to find (like the long 5/16 UNC ones)

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum