![Matronics Email Lists Forum Index](templates/Matronics/images/logo_phpBB.gif) |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
saafbusiness(at)gmail.com Guest
|
Posted: Fri Aug 03, 2018 5:44 am Post subject: Pulsar-List Digest: 5 Msgs - 08/02/18 |
|
|
The fuel selector has killed people ?
This is the one I have from the original areodesigns which obviously aircraft spruce still sells
http://www.aircraftspruce.com/catalog/appages/whfsv.php?clickkey=1606670
So you guys said you threw yours away as soon as you got it but no one told be what they are using that's way better
Thanks
On Fri, Aug 3, 2018 at 2:40 AM Pulsar-List Digest Server <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)> wrote:
Quote: | *
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Pulsar-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Pulsar-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2018-08-02&Archive=Pulsar
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2018-08-02&Archive=Pulsar
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Pulsar-List Digest Archive
---
Total Messages Posted Thu 08/02/18: 5
----------------------------------------------------------
Today's Message Index:
----------------------
1. 08:38 AM - Fuel Selector Valve (Mark Fox)
2. 11:47 AM - Re: Fuel Selector Valve (Bernard Wilder)
3. 12:15 PM - Re: Fuel Selector Valve (FoesFlyDennis)
4. 12:37 PM - Re: Fuel Selector Valve (George Gennuso)
5. 02:05 PM - Re: Fuel Selector Valve (John Schussler)
________________________________ Message 1 _____________________________________
Time: 08:38:08 AM PST US
From: Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)>
Subject: Fuel Selector Valve
All,
I have the original fuel selector value from the aerodesign kit in 1994.
It works but always seems to bind up some over time and I want to
upgrade/replace it
What has been the groups experience with that part? . Any suggestions?
Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
Thanks
________________________________ Message 2 _____________________________________
Time: 11:47:59 AM PST US
From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>
Subject: Re: Fuel Selector Valve
Never used it. Threw it out right away. Bought one from Britain.
I am pulling all stuff related to Rotax out of my Pulsar getting ready to
electrify it. Selector valve still in. I'll look at it this PM.
Let you know.
Bernie Wilder
On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
> All,
>
> I have the original fuel selector value from the aerodesign kit in 1994.
> It works but always seems to bind up some over time and I want to
> upgrade/replace it
>
> What has been the groups experience with that part? . Any suggestions?
>
> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>
>
> Thanks
>
________________________________ Message 3 _____________________________________
Time: 12:15:25 PM PST US
From: FoesFlyDennis <dennistubbs7(at)gmail.com (dennistubbs7(at)gmail.com)>
Subject: Re: Fuel Selector Valve
Bernie you just got my attention in a big way!
Anything you would share regarding your conversion to electric powerplant
would be excitedly appreciated! Online research resources, component
sources, pictures or technical drawings, diagrams or technical workup
sheets specific to your own project, etc. Sorry... I don't mean to put
pressure on you here but that is a potentially very exciting project. I
have never been thrilled with the Jabiru 2200 in my P3 and continually
watch other engine manufacturers for potential swap but each option has
glaring compromises.
If you don't have time or energy to put anything together to share, I
understand that too. We all are busy. But I sure hope you find very
desirable results for your efforts and we all get to see it flying and
serving you well.
Dennis Tubbs - Pulsar III - N852LW
1+623-363-0544
On Thu, Aug 2, 2018, 11:50 AM Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>
wrote:
> Never used it. Threw it out right away. Bought one from Britain.
>
> I am pulling all stuff related to Rotax out of my Pulsar getting ready to
> electrify it. Selector valve still in. I'll look at it this PM.
>
> Let you know.
>
> Bernie Wilder
>
> On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
>
>> All,
>>
>> I have the original fuel selector value from the aerodesign kit in 1994.
>> It works but always seems to bind up some over time and I want to
>> upgrade/replace it
>>
>> What has been the groups experience with that part? . Any suggestions?
>>
>> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>>
>>
>> Thanks
>>
>
>
________________________________ Message 4 _____________________________________
Time: 12:37:56 PM PST US
From: George Gennuso <pulsar1(at)sbcglobal.net (pulsar1(at)sbcglobal.net)>
Subject: Re: Fuel Selector Valve
Bernie, I'm thinking of doing the same thing to my Pulsar. Have you decided
on the motor and battery set up?=C2-
George=C2-
On Thursday, August 2, 2018 11:54 AM, Bernard Wilder <bernard.wilder2(at)g
mail.com> wrote:
Never used it. Threw it out right away.=C2- Bought one from Britain.
I am pulling all stuff related to Rotax out of my Pulsar getting ready to e
lectrify it.=C2- Selector valve still in.=C2- I'll look at it this PM.
=C2-
Let you know.
Bernie Wilder
On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
All,
I have the original fuel selector value from the aerodesign kit in 1994.=C2
- It works but always seems to bind up some over time and I want to upgra
de/replace it
What has been the groups experience with that part? . Any suggestions?
Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range :
)
Thanks
________________________________ Message 5 _____________________________________
Time: 02:05:41 PM PST US
From: John Schussler <N345JS(at)verizon.net (N345JS(at)verizon.net)>
Subject: Re: Fuel Selector Valve
Mark, do not use the original 1994 fuel selector valve, it has killed people.
John Schussler
> On Aug 2, 2018, at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
>
> All,
>
> I have the original fuel selector value from the aerodesign kit in 1994. It
works but always seems to bind up some over time and I want to upgrade/replace
it
>
> What has been the groups experience with that part? . Any suggestions?
>
> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>
> Thanks
===========
ar-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Pulsar-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
|
| - The Matronics Pulsar-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
bernard.wilder2(at)gmail. Guest
|
Posted: Fri Aug 03, 2018 8:01 am Post subject: Pulsar-List Digest: 5 Msgs - 08/02/18 |
|
|
I bought my selector 22 yeas ago. Still have the brochure.
www.andair.co.uk
They had a valve made especially for the Rotax 912. Didn't know about it when I bought mine.
Model # FS22D2. Has a unique feature that accommodates the 912 requirement for a vapor return.
I accomplished the same thing by connecting the vapor return line to fuel line after the selector valve.
Bernie Wilder
On Fri, Aug 3, 2018 at 9:43 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
Quote: | The fuel selector has killed people ?
This is the one I have from the original areodesigns which obviously aircraft spruce still sells
http://www.aircraftspruce.com/catalog/appages/whfsv.php?clickkey=1606670
So you guys said you threw yours away as soon as you got it but no one told be what they are using that's way better
Thanks
On Fri, Aug 3, 2018 at 2:40 AM Pulsar-List Digest Server <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)> wrote:
Quote: | *
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Pulsar-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Pulsar-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2018-08-02&Archive=Pulsar
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2018-08-02&Archive=Pulsar
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Pulsar-List Digest Archive
---
Total Messages Posted Thu 08/02/18: 5
----------------------------------------------------------
Today's Message Index:
----------------------
1. 08:38 AM - Fuel Selector Valve (Mark Fox)
2. 11:47 AM - Re: Fuel Selector Valve (Bernard Wilder)
3. 12:15 PM - Re: Fuel Selector Valve (FoesFlyDennis)
4. 12:37 PM - Re: Fuel Selector Valve (George Gennuso)
5. 02:05 PM - Re: Fuel Selector Valve (John Schussler)
________________________________ Message 1 _____________________________________
Time: 08:38:08 AM PST US
From: Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)>
Subject: Fuel Selector Valve
All,
I have the original fuel selector value from the aerodesign kit in 1994.
It works but always seems to bind up some over time and I want to
upgrade/replace it
What has been the groups experience with that part? . Any suggestions?
Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
Thanks
________________________________ Message 2 _____________________________________
Time: 11:47:59 AM PST US
From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>
Subject: Re: Fuel Selector Valve
Never used it. Threw it out right away. Bought one from Britain.
I am pulling all stuff related to Rotax out of my Pulsar getting ready to
electrify it. Selector valve still in. I'll look at it this PM.
Let you know.
Bernie Wilder
On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
> All,
>
> I have the original fuel selector value from the aerodesign kit in 1994.
> It works but always seems to bind up some over time and I want to
> upgrade/replace it
>
> What has been the groups experience with that part? . Any suggestions?
>
> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>
>
> Thanks
>
________________________________ Message 3 _____________________________________
Time: 12:15:25 PM PST US
From: FoesFlyDennis <dennistubbs7(at)gmail.com (dennistubbs7(at)gmail.com)>
Subject: Re: Fuel Selector Valve
Bernie you just got my attention in a big way!
Anything you would share regarding your conversion to electric powerplant
would be excitedly appreciated! Online research resources, component
sources, pictures or technical drawings, diagrams or technical workup
sheets specific to your own project, etc. Sorry... I don't mean to put
pressure on you here but that is a potentially very exciting project. I
have never been thrilled with the Jabiru 2200 in my P3 and continually
watch other engine manufacturers for potential swap but each option has
glaring compromises.
If you don't have time or energy to put anything together to share, I
understand that too. We all are busy. But I sure hope you find very
desirable results for your efforts and we all get to see it flying and
serving you well.
Dennis Tubbs - Pulsar III - N852LW
1+623-363-0544
On Thu, Aug 2, 2018, 11:50 AM Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>
wrote:
> Never used it. Threw it out right away. Bought one from Britain.
>
> I am pulling all stuff related to Rotax out of my Pulsar getting ready to
> electrify it. Selector valve still in. I'll look at it this PM.
>
> Let you know.
>
> Bernie Wilder
>
> On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
>
>> All,
>>
>> I have the original fuel selector value from the aerodesign kit in 1994.
>> It works but always seems to bind up some over time and I want to
>> upgrade/replace it
>>
>> What has been the groups experience with that part? . Any suggestions?
>>
>> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>>
>>
>> Thanks
>>
>
>
________________________________ Message 4 _____________________________________
Time: 12:37:56 PM PST US
From: George Gennuso <pulsar1(at)sbcglobal.net (pulsar1(at)sbcglobal.net)>
Subject: Re: Fuel Selector Valve
Bernie, I'm thinking of doing the same thing to my Pulsar. Have you decided
on the motor and battery set up?=C2-
George=C2-
On Thursday, August 2, 2018 11:54 AM, Bernard Wilder <bernard.wilder2(at)g
mail.com> wrote:
Never used it. Threw it out right away.=C2- Bought one from Britain.
I am pulling all stuff related to Rotax out of my Pulsar getting ready to e
lectrify it.=C2- Selector valve still in.=C2- I'll look at it this PM.
=C2-
Let you know.
Bernie Wilder
On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
All,
I have the original fuel selector value from the aerodesign kit in 1994.=C2
- It works but always seems to bind up some over time and I want to upgra
de/replace it
What has been the groups experience with that part? . Any suggestions?
Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range :
)
Thanks
________________________________ Message 5 _____________________________________
Time: 02:05:41 PM PST US
From: John Schussler <N345JS(at)verizon.net (N345JS(at)verizon.net)>
Subject: Re: Fuel Selector Valve
Mark, do not use the original 1994 fuel selector valve, it has killed people.
John Schussler
> On Aug 2, 2018, at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
>
> All,
>
> I have the original fuel selector value from the aerodesign kit in 1994. It
works but always seems to bind up some over time and I want to upgrade/replace
it
>
> What has been the groups experience with that part? . Any suggestions?
>
> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>
> Thanks
===========
ar-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Pulsar-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
|
|
| - The Matronics Pulsar-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
bernard.wilder2(at)gmail. Guest
|
Posted: Fri Aug 03, 2018 8:10 am Post subject: Pulsar-List Digest: 5 Msgs - 08/02/18 |
|
|
Mine was made by Andair. Model FS20-4.
Features Left-Both-Right and OFF selections..
One must pull up on a knob on the selector lever to reach OFF
It isn't so much the switch itself that causes the major problem but where the instructions tell you to place the valve.
My instructions for kit number 390 was to place the valve on the front side of the pilot seat support. Thus you had to reach between your legs to operate the fuel valve.
Maybe other Pulsars were different but for me in mine I had to undo my shoulder harness to be able to lean for enough forward to manipulate the valve when it was mounted there.
I never ran more than 30 minutes on one side before switching to the other in order to keep the plane balanced.
Imagine yourself wanting to change from left to right fuel cell while in the air. 1. Undo your shoulder harness, 2. lean forward and turn the selector valve. 3. Hope that you turned it the right way because you can't see what you have done. 4. Lean back and buckle up again.
Now,,,, imagine yourself doing that if you run out of fuel and trying to keep flying the airplane at the same time.
From the beginning I mounted my fuel selector valve right in front of the stick. I can reach it without difficulty or if I have a passenger I can ask them to turn the selector valve - - AND no danger of accidently turning it to off.
Fly Safe,,,
Bernie Wilder
On Fri, Aug 3, 2018 at 9:43 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
Quote: | The fuel selector has killed people ?
This is the one I have from the original areodesigns which obviously aircraft spruce still sells
http://www.aircraftspruce.com/catalog/appages/whfsv.php?clickkey=1606670
So you guys said you threw yours away as soon as you got it but no one told be what they are using that's way better
Thanks
On Fri, Aug 3, 2018 at 2:40 AM Pulsar-List Digest Server <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)> wrote:
Quote: | *
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Pulsar-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Pulsar-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2018-08-02&Archive=Pulsar
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2018-08-02&Archive=Pulsar
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Pulsar-List Digest Archive
---
Total Messages Posted Thu 08/02/18: 5
----------------------------------------------------------
Today's Message Index:
----------------------
1. 08:38 AM - Fuel Selector Valve (Mark Fox)
2. 11:47 AM - Re: Fuel Selector Valve (Bernard Wilder)
3. 12:15 PM - Re: Fuel Selector Valve (FoesFlyDennis)
4. 12:37 PM - Re: Fuel Selector Valve (George Gennuso)
5. 02:05 PM - Re: Fuel Selector Valve (John Schussler)
________________________________ Message 1 _____________________________________
Time: 08:38:08 AM PST US
From: Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)>
Subject: Fuel Selector Valve
All,
I have the original fuel selector value from the aerodesign kit in 1994.
It works but always seems to bind up some over time and I want to
upgrade/replace it
What has been the groups experience with that part? . Any suggestions?
Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
Thanks
________________________________ Message 2 _____________________________________
Time: 11:47:59 AM PST US
From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>
Subject: Re: Fuel Selector Valve
Never used it. Threw it out right away. Bought one from Britain.
I am pulling all stuff related to Rotax out of my Pulsar getting ready to
electrify it. Selector valve still in. I'll look at it this PM.
Let you know.
Bernie Wilder
On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
> All,
>
> I have the original fuel selector value from the aerodesign kit in 1994.
> It works but always seems to bind up some over time and I want to
> upgrade/replace it
>
> What has been the groups experience with that part? . Any suggestions?
>
> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>
>
> Thanks
>
________________________________ Message 3 _____________________________________
Time: 12:15:25 PM PST US
From: FoesFlyDennis <dennistubbs7(at)gmail.com (dennistubbs7(at)gmail.com)>
Subject: Re: Fuel Selector Valve
Bernie you just got my attention in a big way!
Anything you would share regarding your conversion to electric powerplant
would be excitedly appreciated! Online research resources, component
sources, pictures or technical drawings, diagrams or technical workup
sheets specific to your own project, etc. Sorry... I don't mean to put
pressure on you here but that is a potentially very exciting project. I
have never been thrilled with the Jabiru 2200 in my P3 and continually
watch other engine manufacturers for potential swap but each option has
glaring compromises.
If you don't have time or energy to put anything together to share, I
understand that too. We all are busy. But I sure hope you find very
desirable results for your efforts and we all get to see it flying and
serving you well.
Dennis Tubbs - Pulsar III - N852LW
1+623-363-0544
On Thu, Aug 2, 2018, 11:50 AM Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>
wrote:
> Never used it. Threw it out right away. Bought one from Britain.
>
> I am pulling all stuff related to Rotax out of my Pulsar getting ready to
> electrify it. Selector valve still in. I'll look at it this PM.
>
> Let you know.
>
> Bernie Wilder
>
> On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
>
>> All,
>>
>> I have the original fuel selector value from the aerodesign kit in 1994.
>> It works but always seems to bind up some over time and I want to
>> upgrade/replace it
>>
>> What has been the groups experience with that part? . Any suggestions?
>>
>> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>>
>>
>> Thanks
>>
>
>
________________________________ Message 4 _____________________________________
Time: 12:37:56 PM PST US
From: George Gennuso <pulsar1(at)sbcglobal.net (pulsar1(at)sbcglobal.net)>
Subject: Re: Fuel Selector Valve
Bernie, I'm thinking of doing the same thing to my Pulsar. Have you decided
on the motor and battery set up?=C2-
George=C2-
On Thursday, August 2, 2018 11:54 AM, Bernard Wilder <bernard.wilder2(at)g
mail.com> wrote:
Never used it. Threw it out right away.=C2- Bought one from Britain.
I am pulling all stuff related to Rotax out of my Pulsar getting ready to e
lectrify it.=C2- Selector valve still in.=C2- I'll look at it this PM.
=C2-
Let you know.
Bernie Wilder
On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
All,
I have the original fuel selector value from the aerodesign kit in 1994.=C2
- It works but always seems to bind up some over time and I want to upgra
de/replace it
What has been the groups experience with that part? . Any suggestions?
Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range :
)
Thanks
________________________________ Message 5 _____________________________________
Time: 02:05:41 PM PST US
From: John Schussler <N345JS(at)verizon.net (N345JS(at)verizon.net)>
Subject: Re: Fuel Selector Valve
Mark, do not use the original 1994 fuel selector valve, it has killed people.
John Schussler
> On Aug 2, 2018, at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
>
> All,
>
> I have the original fuel selector value from the aerodesign kit in 1994. It
works but always seems to bind up some over time and I want to upgrade/replace
it
>
> What has been the groups experience with that part? . Any suggestions?
>
> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>
> Thanks
===========
ar-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Pulsar-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
|
|
| - The Matronics Pulsar-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
kulpa(at)att.net Guest
|
Posted: Sun Aug 05, 2018 7:03 pm Post subject: Pulsar-List Digest: 5 Msgs - 08/02/18 |
|
|
I talked to the Andair rep. at OshKosh. They have a valve for almost any engine and especially for those used in the Pulsar, Rotax and Jabiru. I've looked at others but theirs have some nice features, see Bernie's statement below. Like Bernie, mounting mine in front of the stick so I can easily reach it in flight.
Quote: | Best Regards, Bill
C: 512-415-2991 | On 8/3/2018 11:00 AM, Bernard Wilder wrote:
Quote: | I bought my selector 22 yeas ago. Still have the brochure.
www.andair.co.uk
They had a valve made especially for the Rotax 912. Didn't know about it when I bought mine.
Model # FS22D2. Has a unique feature that accommodates the 912 requirement for a vapor return.
I accomplished the same thing by connecting the vapor return line to fuel line after the selector valve.
Bernie Wilder
On Fri, Aug 3, 2018 at 9:43 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
Quote: | The fuel selector has killed people ?
This is the one I have from the original areodesigns which obviously aircraft spruce still sells
http://www.aircraftspruce.com/catalog/appages/whfsv.php?clickkey=1606670
So you guys said you threw yours away as soon as you got it but no one told be what they are using that's way better
Thanks
On Fri, Aug 3, 2018 at 2:40 AM Pulsar-List Digest Server <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)> wrote:
Quote: | *
=========================
Online Versions of Today's List Digest Archive
=========================
Today's complete Pulsar-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Pulsar-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
[url=http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-08-02&Archive=Pulsar]http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-08-02&Archive=Pulsar[/url]
Text Version:
[url=http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-08-02&Archive=Pulsar]http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-08-02&Archive=Pulsar[/url]
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Pulsar-List Digest Archive
---
Total Messages Posted Thu 08/02/18: 5
----------------------------------------------------------
Today's Message Index:
----------------------
1. 08:38 AM - Fuel Selector Valve (Mark Fox)
2. 11:47 AM - Re: Fuel Selector Valve (Bernard Wilder)
3. 12:15 PM - Re: Fuel Selector Valve (FoesFlyDennis)
4. 12:37 PM - Re: Fuel Selector Valve (George Gennuso)
5. 02:05 PM - Re: Fuel Selector Valve (John Schussler)
________________________________ Message 1 _____________________________________
Time: 08:38:08 AM PST US
From: Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)>
Subject: Fuel Selector Valve
All,
I have the original fuel selector value from the aerodesign kit in 1994.
It works but always seems to bind up some over time and I want to
upgrade/replace it
What has been the groups experience with that part? . Any suggestions?
Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
Thanks
________________________________ Message 2 _____________________________________
Time: 11:47:59 AM PST US
From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>
Subject: Re: Fuel Selector Valve
Never used it. Threw it out right away. Bought one from Britain.
I am pulling all stuff related to Rotax out of my Pulsar getting ready to
electrify it. Selector valve still in. I'll look at it this PM.
Let you know.
Bernie Wilder
On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
> All,
>
> I have the original fuel selector value from the aerodesign kit in 1994.
> It works but always seems to bind up some over time and I want to
> upgrade/replace it
>
> What has been the groups experience with that part? . Any suggestions?
>
> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>
>
> Thanks
>
________________________________ Message 3 _____________________________________
Time: 12:15:25 PM PST US
From: FoesFlyDennis <dennistubbs7(at)gmail.com (dennistubbs7(at)gmail.com)>
Subject: Re: Fuel Selector Valve
Bernie you just got my attention in a big way!
Anything you would share regarding your conversion to electric powerplant
would be excitedly appreciated! Online research resources, component
sources, pictures or technical drawings, diagrams or technical workup
sheets specific to your own project, etc. Sorry... I don't mean to put
pressure on you here but that is a potentially very exciting project. I
have never been thrilled with the Jabiru 2200 in my P3 and continually
watch other engine manufacturers for potential swap but each option has
glaring compromises.
If you don't have time or energy to put anything together to share, I
understand that too. We all are busy. But I sure hope you find very
desirable results for your efforts and we all get to see it flying and
serving you well.
Dennis Tubbs - Pulsar III - N852LW
1+623-363-0544
On Thu, Aug 2, 2018, 11:50 AM Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>
wrote:
> Never used it. Threw it out right away. Bought one from Britain.
>
> I am pulling all stuff related to Rotax out of my Pulsar getting ready to
> electrify it. Selector valve still in. I'll look at it this PM.
>
> Let you know.
>
> Bernie Wilder
>
> On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
>
>> All,
>>
>> I have the original fuel selector value from the aerodesign kit in 1994.
>> It works but always seems to bind up some over time and I want to
>> upgrade/replace it
>>
>> What has been the groups experience with that part? . Any suggestions?
>>
>> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>>
>>
>> Thanks
>>
>
>
________________________________ Message 4 _____________________________________
Time: 12:37:56 PM PST US
From: George Gennuso <pulsar1(at)sbcglobal.net (pulsar1(at)sbcglobal.net)>
Subject: Re: Fuel Selector Valve
Bernie, I'm thinking of doing the same thing to my Pulsar. Have you decided
on the motor and battery set up?=C2-
George=C2-
On Thursday, August 2, 2018 11:54 AM, Bernard Wilder <bernard.wilder2(at)g
mail.com> wrote:
Never used it. Threw it out right away.=C2- Bought one from Britain.
I am pulling all stuff related to Rotax out of my Pulsar getting ready to e
lectrify it.=C2- Selector valve still in.=C2- I'll look at it this PM.
=C2-
Let you know.
Bernie Wilder
On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
All,
I have the original fuel selector value from the aerodesign kit in 1994.=C2
- It works but always seems to bind up some over time and I want to upgra
de/replace it
What has been the groups experience with that part? . Any suggestions?
Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range :
)
Thanks
________________________________ Message 5 _____________________________________
Time: 02:05:41 PM PST US
From: John Schussler <N345JS(at)verizon.net (N345JS(at)verizon.net)>
Subject: Re: Fuel Selector Valve
Mark, do not use the original 1994 fuel selector valve, it has killed people.
John Schussler
> On Aug 2, 2018, at 11:34 AM, Mark Fox <saafbusiness(at)gmail.com (saafbusiness(at)gmail.com)> wrote:
>
> All,
>
> I have the original fuel selector value from the aerodesign kit in 1994. It
works but always seems to bind up some over time and I want to upgrade/replace
it
>
> What has been the groups experience with that part? . Any suggestions?
>
> Seems like Aircraft Spruce has them form $7 - $1000.....Pretty wide range
>
> Thanks
===========
ar-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Pulsar-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
|
|
|
| - The Matronics Pulsar-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Pulsar-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|