Matronics Email Lists Forum Index Matronics Email Lists
BBS Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Tosten grip wiring with car-relay for trim

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Tue Jun 20, 2017 6:46 pm    Post subject: Tosten grip wiring with car-relay for trim Reply with quote

At 10:01 AM 6/20/2017, you wrote:
Quote:
--> AeroElectric-List message posted by: "Achille" <mickael.t(at)live.fr>

Hello,

I want to wire my new grip tosten with my basic 12v electrical actuating as trim (up/down) pulling a spring.

I bought a double car relay to do some test to find the good wiring diagram but before that I prefer asking in this forum how can I wire it if anybody know the response ?

Before I was a double pole switch, wire by the previous owner.

I had a problem with the previous wiring, when i actuated my trim, my compas begin to turn completely. The motor/switch were not close to the compas.

I have tested to set the motor very close to the compas to do a test. Without all the wire juste motor and a small battery. And in this case it don't turn ! I don't understand why.

It's difficult to diagnose the underlying
physics for your observations without first-
hand observation and diagnosis. I can tell
you that incidences of wiring
interfering with the compass is rare.
Suggest you get the new trim system installed
using the drawing cited below as guidance.

Then see if the compass is still getting
trashed . . . it will be easier to figure
out why it IS having problems than to
figure out why it is NOT having problems.


Quote:
I find this documentation to do my wire.

I think this wiring diagram is what you're
needing.

http://tinyurl.com/y7mwhg4t



Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Achille



Joined: 12 Jun 2017
Posts: 25
Location: Europe

PostPosted: Fri Jun 23, 2017 4:26 am    Post subject: Re: Tosten grip wiring with car-relay for trim Reply with quote

Thank you bob,

I haven't see the response before and I answered in other topic.

I will try it and I will come back to tell if it run better or not. (if it run well also to tell what it was bad if it can help anyone.)

I find relay a bit slow for the motor trim operation, we haven't another solution to wire it with another system ? (transistor ? I don't know well what is it, I just read that on internet)

Thank you !

Mickaƫl


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group