Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Tosten grip wiring with car-relay for trim

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
Achille



Joined: 12 Jun 2017
Posts: 25
Location: Europe

PostPosted: Tue Jun 20, 2017 7:01 am    Post subject: Tosten grip wiring with car-relay for trim Reply with quote

Hello,

I want to wire my new grip tosten with my basic 12v electrical actuating as trim (up/down) pulling a spring.

I bought a double car relay to do some test to find the good wiring diagram but before that I prefer asking in this forum how can I wire it if anybody know the response ?

Before I was a double pole switch, wire by the previous owner.

I had a problem with the previous wiring, when i actuated my trim, my compas begin to turn completely. The motor/switch were not close to the compas.

I have tested to set the motor very close to the compas to do a test. Without all the wire juste motor and a small battery. And in this case it don't turn ! I don't understand why.

I find this documentation to do my wire.

Thank you in advance.

Mickaël


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



Capture d’écran 2017-06-20 à 17.00.03.png
 Description:
 Filesize:  557.46 KB
 Viewed:  6060 Time(s)

Capture d’écran 2017-06-20 à 17.00.03.png



Capture d’écran 2017-06-20 à 16.51.17.png
 Description:
 Filesize:  98.08 KB
 Viewed:  6060 Time(s)

Capture d’écran 2017-06-20 à 16.51.17.png


Back to top
View user's profile Send private message
user9253



Joined: 28 Mar 2008
Posts: 1906
Location: Riley TWP Michigan

PostPosted: Wed Jun 21, 2017 4:12 am    Post subject: Re: Tosten grip wiring with car-relay for trim Reply with quote

To avoid compass interference, do not run a single wire anywhere near the compass. Run the positive and negative wires together in a twisted pair.

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores
Back to top
View user's profile Send private message
Achille



Joined: 12 Jun 2017
Posts: 25
Location: Europe

PostPosted: Thu Jun 22, 2017 7:07 am    Post subject: Re: Tosten grip wiring with car-relay for trim Reply with quote

Hello,

Thank you I will do it, it's true that before wire was twist only 3 inch. and the other wire for the trim/switch trim/bus were not.

For the wiring I find a wiring diagram for a car relay, but time to actuate relay is very slow for trim fonction. Any idea to improve ? (special relay ? or other things ? )

Mickaël Wink


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List



Capture d’écran 2017-06-22 à 17.05.47.png
 Description:
 Filesize:  196.75 KB
 Viewed:  6004 Time(s)

Capture d’écran 2017-06-22 à 17.05.47.png


Back to top
View user's profile Send private message
gilles.thesee(at)free.fr
Guest





PostPosted: Fri Jun 23, 2017 7:28 am    Post subject: Tosten grip wiring with car-relay for trim Reply with quote

Le 23/06/2017 à 14:26, Achille a écrit :
Quote:


Thank you bob,

I haven't see the response before and I answered in other topic.

I will try it and I will come back to tell if it run better or not. (if it run well also to tell what it was bad if it can help anyone.)

I find relay a bit slow for the motor trim operation, we haven't another solution to wire it with another system ? (transistor ? I don't know well what is it, I just read that on internet)

Achille,


Just in case you happen to be happier posting in French, do not hesitate
to mail me personal in French.
Could you explain what you find so slow in relay operation, especially
considering that most trims are slow operating ?

N'hésite pas à discuter en français !

Best regards,

--
Amicalement,
Gilles
http://contrails.free.fr


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
gilles.thesee(at)free.fr
Guest





PostPosted: Fri Jun 23, 2017 7:29 am    Post subject: Tosten grip wiring with car-relay for trim Reply with quote

Le 23/06/2017 à 14:26, Achille a écrit :
Quote:
I find relay a bit slow for the motor trim operation, we haven't another solution to wire it with another system ? (transistor ? I don't know well what is it, I just read that on internet)

Achille,


Just in case you happen to be happier posting in French, do not hesitate
to mail me personal in French.
Could you explain what you find so slow in relay operation, especially
considering that most trims are slow operating ?

N'hésite pas à discuter en français !

Best regards,

--
Amicalement,
Gilles
http://contrails.free.fr


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Peter(at)sportingaero.com
Guest





PostPosted: Sat Jun 24, 2017 6:19 am    Post subject: Tosten grip wiring with car-relay for trim Reply with quote

Have you tried something like Safety Trim?

http://www.tcwtech.com/Safety-Trim%20Page.htm

Peter

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
kuffel(at)cyberport.net
Guest





PostPosted: Sat Jun 24, 2017 7:20 am    Post subject: Tosten grip wiring with car-relay for trim Reply with quote

<< Have you tried something like Safety Trim?
http://www.tcwtech.com/Safety-Trim%20Page.htm >>

Or look at the June 2013 issue of Kitplanes for a do it yourself controller
with all the features and then some of the $400 TCW unit for less than $50
in parts.

Or email me directly for a copy of the article, schematics, photos, etc.

Tom Kuffel
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group