Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Zenith601-List Digest: 0 Msgs - 08/30/14

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith601-List
View previous topic :: View next topic  
Author Message
mvarelasartal(at)yahoo.es
Guest





PostPosted: Fri Sep 05, 2014 12:46 am    Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14 Reply with quote

Hi to all,
I´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?
Thanks to all in advance.....
Marcos Varela
CH601 HD
Spain

El Domingo 31 de agosto de 2014 9:13, Zenith601-List Digest Server <zenith601-list(at)matronics.com> escribió:



*

=========================
Online Versions of Today's List Digest Archive
=========================

Today's complete Zenith601-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith601-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2014-08-30&Archive=Zenith601

Text Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2014-08-30&Archive=Zenith601
=======================
EMail Version of Today's List Digest Archive
=======================


----------------------------------------------------------
  Zenith601-List Digest Archive
---
  Total Messages Posted Sat 08/30/14: 0
  ----------------------------------------------------------


Today's Message Index:
----------------------

nith601-List" target="_blank">http://www.matronics.com/Navigator?Zenith60bsp; ums.matronics.com/" target="_blank">http://forums.matronics.com/
_; -Matt Dralcontribution" target="_blank">http://www.matronics.com/contribution


- The Matronics Zenith601-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List
Back to top
psm(at)att.net
Guest





PostPosted: Fri Sep 05, 2014 4:07 am    Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14 Reply with quote

Hi Marcos,

I built a Buttercup fuselage using 4130 and ER70S2 filler rods. It was a while ago so I am not sure of the filler rod sizes I used but I think I used 1/16 for most of the work. The filler rod should be selected for the thickness of the pieces being joined.

Paul
Camas, WA, USA

On 9/5/2014 1:42 AM, Marcos Varela Sartal wrote:

[quote] Hi to all,
I´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?
Thanks to all in advance.....
Marcos Varela
CH601 HD
Spain


[b]


- The Matronics Zenith601-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List
Back to top
larrycmcfarland(at)gmail.
Guest





PostPosted: Fri Sep 05, 2014 5:31 am    Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14 Reply with quote

Marcos,
I’d recommend ER70 and .050 diameter weld rod
Less the chance of cold welds.  ER 70 will alloy with 4130 and give a better weld.

Larry McFarland
www.macsmachine.com


From: owner-zenith601-list-server(at)matronics.com [mailto:owner-zenith601-list-server(at)matronics.com] On Behalf Of Marcos Varela Sartal
Sent: Friday, September 05, 2014 3:42 AM
To: zenith601-list(at)matronics.com
Subject: Re: Zenith601-List Digest: 0 Msgs - 08/30/14

Hi to all,

I´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?

Thanks to all in advance.....

Marcos Varela

CH601 HD

Spain



El Domingo 31 de agosto de 2014 9:13, Zenith601-List Digest Server <zenith601-list(at)matronics.com (zenith601-list(at)matronics.com)> escribió:


*

=========================
Online Versions of Today's List Digest Archive
=========================

Today's complete Zenith601-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith601-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2014-08-30&Archive=Zenith601

Text Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2014-08-30&Archive=Zenith601
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Zenith601-List Digest Archive
---
Total Messages Posted Sat 08/30/14: 0
----------------------------------------------------------
Today's Message Index:
----------------------

nith601-List" target="_blank">http://www.matronics.com/Navigator?Zenith60bsp; ums.matronics.com/" target="_blank">http://forums.matronics.com/
_; -Matt Dralcontribution" target="_blank">http://www.matronics.com/contribution




Quote:
http://www.matronics.com/Navigator?Zenith601-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
[quote][b]


- The Matronics Zenith601-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List
Back to top
mvarelasartal(at)yahoo.es
Guest





PostPosted: Fri Sep 05, 2014 2:39 pm    Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14 Reply with quote

Thanks a lot for the information. I´ll order ER70 to start welding brake pedals and control bar.
Here some pictures of my progress....
My Best Regards

El Viernes 5 de septiembre de 2014 15:36, Larry McFarland <larrycmcfarland(at)gmail.com> escribió:



Marcos,
I’d recommend ER70 and .050 diameter weld rod
Less the chance of cold welds. ER 70 will alloy with 4130 and give a better weld.

Larry McFarland
http://www.macsmachine.com/


From: owner-zenith601-list-server(at)matronics.com [mailto:owner-zenith601-list-server(at)matronics.com] On Behalf Of Marcos Varela Sartal
Sent: Friday, September 05, 2014 3:42 AM
To: zenith601-list(at)matronics.com
Subject: Re: Zenith601-List Digest: 0 Msgs - 08/30/14

Hi to all,

I´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?

Thanks to all in advance.....

Marcos Varela

CH601 HD

Spain



El Domingo 31 de agosto de 2014 9:13, Zenith601-List Digest Server <zenith601-list(at)matronics.com (zenith601-list(at)matronics.com)> escribió:


*

=========================
Online Versions of Today's List Digest Archive
=========================

Today's complete Zenith601-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith601-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2014-08-30&Archive=Zenith601

Text Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2014-08-30&Archive=Zenith601
=======================
EMail Version of Today's List Digest Archive
=======================
  ----------------------------------------------------------
    Zenith601-List Digest Archive
    ---
Total Messages Posted Sat 08/30/14: 0
  ----------------------------------------------------------
Today's Message Index:
----------------------

nith601-List" target="_blank">http://www.matronics.com/Navigator?Zenith60bsp; ums.matronics.com/" target="_blank">http://forums.matronics.com/
_;   -Matt Dralcontribution" target="_blank">http://www.matronics.com/contribution



Quote:

http://www.matronics.com/Navigator?Zenith601-List
0
Quote:

1
Quote:

2
Quote:

3
Quote:

4
Quote:

5
Quote:

6
Quote:

7
Quote:

8
Quote:

9
Quote:
0


- The Matronics Zenith601-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List



IMG_2853.JPG
 Description:
 Filesize:  150.03 KB
 Viewed:  4864 Time(s)

IMG_2853.JPG



IMG_2319.JPG
 Description:
 Filesize:  142.69 KB
 Viewed:  4864 Time(s)

IMG_2319.JPG


Back to top
larrycmcfarland(at)gmail.
Guest





PostPosted: Sat Sep 06, 2014 5:33 am    Post subject: Zenith601-List Digest: 0 Msgs - 08/30/14 Reply with quote

Beautiful work Marcos,
The 601 is a great project that satisfies during the build process.
If my website can be of any assist in your fabrication process,
do visit and send questions if needed.
Best regards,

Larry McFarland

From: owner-zenith601-list-server(at)matronics.com [mailto:owner-zenith601-list-server(at)matronics.com] On Behalf Of Marcos Varela Sartal
Sent: Friday, September 05, 2014 5:35 PM
To: zenith601-list(at)matronics.com
Subject: Re: Re: Zenith601-List Digest: 0 Msgs - 08/30/14

Thanks a lot for the information. I´ll order ER70 to start welding brake pedals and control bar.

Here some pictures of my progress....

My Best Regards



El Viernes 5 de septiembre de 2014 15:36, Larry McFarland <larrycmcfarland(at)gmail.com> escribió:


Marcos,

I’d recommend ER70 and .050 diameter weld rod

Less the chance of cold welds. ER 70 will alloy with 4130 and give a better weld.



Larry McFarland

http://www.macsmachine.com/





From: owner-zenith601-list-server(at)matronics.com [mailto:owner-zenith601-list-server(at)matronics.com] On Behalf Of Marcos Varela Sartal
Sent: Friday, September 05, 2014 3:42 AM
To: zenith601-list(at)matronics.com
Subject: Re: Zenith601-List Digest: 0 Msgs - 08/30/14



Hi to all,
I´m going to start to Weld the 4130 parts (brakes, engine jig, etc...) What you recommend for tig Weld, ER70 or ER80 and which size?
Thanks to all in advance.....
Marcos Varela
CH601 HD
Spain

El Domingo 31 de agosto de 2014 9:13, Zenith601-List Digest Server <zenith601-list(at)matronics.com (zenith601-list(at)matronics.com)> escribió:


*

=========================
Online Versions of Today's List Digest Archive
=========================

Today's complete Zenith601-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith601-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2014-08-30&Archive=Zenith601

Text Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2014-08-30&Archive=Zenith601
=======================
EMail Version of Today's List Digest Archive
=======================
----------------------------------------------------------
Zenith601-List Digest Archive
---
Total Messages Posted Sat 08/30/14: 0
----------------------------------------------------------
Today's Message Index:
----------------------

nith601-List" target="_blank">http://www.matronics.com/Navigator?Zenith60bsp; ums.matronics.com/" target="_blank">http://forums.matronics.com/
_; -Matt Dralcontribution" target="_blank">http://www.matronics.com/contribution




[quote] http://www.matronics.com/Navigator?Zenith601-Listhttp://forums.matronics.comhttp://www.matronics.com/contribution http://www.matronics.com/========================forums.matronics.com/" target="_blank" rel="nofollow">http://forums.mat=   --> [b]


- The Matronics Zenith601-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith601-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group