Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Climb question.... URGENT. HOPING FOR ANSWER BY 1200 Zulu!

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith601-List
View previous topic :: View next topic  
Author Message
psm(at)att.net
Guest





PostPosted: Wed Oct 02, 2013 6:18 pm    Post subject: Climb question.... URGENT. HOPING FOR ANSWER BY 1200 Zulu! Reply with quote

Hi Chad,

Of course you already know adding weight will reduce your climb rate.
It will also increase your takeoff roll.

I don't know how much the reduction in climb rate will be. Remember that
lots of spam cans only climb at a few hundred feet per minute when fully
loaded.

My only suggestion is that you carefully pick a point on the runway
where you will abort the takeoff if not yet airborne. This should be
around half way to the far end of the runway. Once you are airborne you
can do a similar check while flying the pattern before departing for
your destination. If you can't make it to pattern altitude before
getting half way downwind then it might be prudent to land and adjust
your propeller for more effective climb.

Good luck,

Paul
Camas, WA
Zodiac XL, Jab 3300

On 10/2/2013 6:59 PM, SIDESLIP wrote:
Quote:


Hello all. Quick question....

I changed the pitch of my prop for a cruise setting, so I lost about 200-300' min doing so at 1100lbs. At 1100lbs, (1300 is gross) I saw 1200-1300'/min at 1100lbs. With the pitch change i see between 600-1100'/min depending on the day. What impact would adding 200lbs to bring it to gross do you think? My concern is whether it will climb or not. It's a ROTAX 912ULS.

IM flying gross tomorrow am from a 4000' runway. I'd LOVE some feedback on this. Hope I'm not getting myself in over my head at gross. Guess the only way to find out is try.

ALL COMMENTS APPRECIATED!!!!!

Thanks!

Chad Scriver

ZODIAC 601XL-B
Rotax 912ULS
WARPDDRIVE 3 blade

--------
C-GYXQ. 912ULS. 601XL-B


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=409732#409732



- The Matronics Zenith601-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith601-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith601-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group