Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Securing Adel Clamps?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
rparigor(at)SUFFOLK.LIB.N
Guest





PostPosted: Mon Jan 09, 2006 12:01 am    Post subject: Securing Adel Clamps? Reply with quote


I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
klehman(at)albedo.net
Guest





PostPosted: Mon Jan 09, 2006 4:52 am    Post subject: Securing Adel Clamps? Reply with quote


Hi Ron
I put a turn or two of self bonding silicone tape such as Spruce pn
09-30450 under the clamps in a few places.
Ken
rparigor(at)SUFFOLK.LIB.NY.US wrote:
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
klehman(at)albedo.net
Guest





PostPosted: Mon Jan 09, 2006 8:19 am    Post subject: Securing Adel Clamps? Reply with quote


Hi Ron
I put a turn or two of self bonding silicone tape such as Spruce pn
09-30450 under the clamps in a few places.
Ken
rparigor(at)SUFFOLK.LIB.NY.US wrote:
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
klehman(at)albedo.net
Guest





PostPosted: Mon Jan 09, 2006 9:31 am    Post subject: Securing Adel Clamps? Reply with quote


Hi Ron
I put a turn or two of self bonding silicone tape such as Spruce pn
09-30450 under the clamps in a few places.
Ken
rparigor(at)SUFFOLK.LIB.NY.US wrote:
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris

AdmID:053612CCD6580EA455D7538CA2C4CDAB
AdmID:C1B612EBA4062B00235F2F5E9FA4C345

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
klehman(at)albedo.net
Guest





PostPosted: Mon Jan 09, 2006 10:23 am    Post subject: Securing Adel Clamps? Reply with quote


Hi Ron
I put a turn or two of self bonding silicone tape such as Spruce pn
09-30450 under the clamps in a few places.
Ken
rparigor(at)SUFFOLK.LIB.NY.US wrote:
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris

AdmID:053612CCD6580EA455D7538CA2C4CDAB
AdmID:C1B612EBA4062B00235F2F5E9FA4C345
AdmID:2099579377CA7A35EFC477855FFB0349

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group