sparrowhawk2(at)mac.com Guest
|
Posted: Thu Mar 02, 2006 2:25 pm Post subject: Changing the mag switches out for emag and pmag |
|
|
Quote: |
>
> I'm ditching my old Slick mags and going to one Emag and one Pmag. My
> wiring from switches to mags is from the old Z-9 drawing (same mag
> wiring as in
> Z-11). Emagair says that you should switch off power to both the
> emag and the pmag because there is a drain on the battery when they
> are powered up, so direct wiring from the battery bus without a
> switch is out. Both
> ignitions should be ON during start, as opposed to the disabling of
> the right mag during startup now. Is there a way to retain the
> switches I have, including the momentary "start" function on the left
> mag switch rather than replace the switches with 1-3 switches as in
> Z-12?
>
> Thanks
>
> Jerry Carter
> RV-8A approaching 500 hrs
>
>
> -------------------
|
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|