Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Icom A200-Help! (Bobs diagram errata, ICOM corrections)

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
gmcjetpilot(at)yahoo.com
Guest





PostPosted: Sun Feb 12, 2006 9:47 am    Post subject: Icom A200-Help! (Bobs diagram errata, ICOM corrections) Reply with quote

Bob, very nice diagrams, much nicer than mine. Two comments.....

"I'd intended to show how to "dummy load" the speaker
output with an inset on page 2."

Regarding comment about speaker dummy load - I called ICOM and
they told me emphatically that it was not necessary to connect
anything to the speaker load, so your diagram is correct. Other than
that I think we had similar ideas.


The second item is the internal back light. You show it connect to the
nav lights as ON and OFF deal. It does seem like this from the
text, like it is a ON/half/OFF deal from the text. Again a call to ICOM
says back lighting is affected by voltage. In other words light intensity
is variable and proportional when connected to a variable voltage.


ICOM errata:
The previous post that ICOM shows the incorrect optional
switches for the Yoke mounted channel and frequency exchange
switches, I believe they have corrected it. They show spring
loaded DTSP toggle, normally in center open position and
momentary to ground pin L or 12. The optional switch choice is
two single momentary SPST switches to ground.


George


----------------------
From: "Robert L. Nuckolls, III" <nuckollsr(at)cox.net>
Subject: Re: Re: Icom A200-Help!


III"
<nuckollsr(at)cox.net>

At 09:58 AM 2/12/2006 +1100, you wrote:


A real service manual! I'd love to get a copy.

The latest wiring on the ICOM website shows two normally
open, pull-downs to ground for those two functions.

I needed a break from some other things I was supposed to
be
doing today and threw a little drawing package together. It's
posted at

http://www.aeroelectric.com/Installation_Data/IC-A200_Icom_Installation_Wiring.pdf

If folks would care to review it and ask any questions that
are not
answered, suggest additional materials be added or have
spotted
errors, I'd be delighted to get he feedback. I've already found a
goof. I'd intended to show how to "dummy load" the speaker
output with an inset on page 2. I also note that the real model
number is IC-A200 which ought to be fixed in several places.

Bob . . .




---------------------------------
Use Photomail to share photos without annoying attachments.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group