Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

TruTrak pitch servo RV8

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV8-List
View previous topic :: View next topic  
Author Message
Tom D



Joined: 12 Apr 2007
Posts: 4
Location: Sacramento Calif

PostPosted: Thu Apr 12, 2007 8:56 am    Post subject: TruTrak pitch servo RV8 Reply with quote

Anyone have any pictures of a TruTrak pitch servo installation for a RV8 with rear battery mount?I just got my servo's and the installation drawings are more than lacking. I was sent a new Bellcrank mount and it seems the way to mount it is to have the servo protrude aft , past bulkhead F -808. The drawings do not show any orientation , only the servo mounted to the new bellcrank mount. There is no room for the servo and the battery if I try to mount the servo forward of bulkhead F-808. Am I correct or am I missing something?
Tom D
RV8-A....40% N60TD(reserved)


- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List
Back to top
View user's profile Send private message
wslaughter(at)houston.rr.
Guest





PostPosted: Thu Apr 12, 2007 9:26 am    Post subject: TruTrak pitch servo RV8 Reply with quote

The servo does indeed mount aft, protruding back past the F-808. The hardest
part of this deal was match drilling the new bellcrank/servo mount to the
existing rivet holes in the baggage compartment ribs on my quickbuild. I'm
not sure how I'd have done it without my newly acquired angle drill. After
careful measuring and check fitting, I drilled the forward-most hole on one
side of the new mount on the bench, then clecoed the assembly in place. I
used my laser to align the centerline of the mount assembly with the
centerline of the fuselage, clamped it down and starting match drilling from
underneath. Worked out fine, but what a pain. This task would be much easier
on a slow build. Some trimming of the F-808 flange was required.

William
RV-8QB Fuselage

--


- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List
Back to top
Tom D



Joined: 12 Apr 2007
Posts: 4
Location: Sacramento Calif

PostPosted: Fri Apr 13, 2007 1:04 pm    Post subject: TruTrak pitch servo RV8 Reply with quote

Thanks William, as you say it looks like a pain thanks also for the idea how to do it
Tom D


- The Matronics RV8-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV8-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group