Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Dynaon Avionics

Matronics Email Lists Forum Index -> RV9-List

View previous topic :: View next topic

Author Message

dthomas773(at)sbcglobal.n
Guest

Posted: Wed Mar 21, 2007 7:19 pm Post subject: Dynaon Avionics

Big Question.  Does anyone have personal experiance,

good or bad with the Dynon EFIS-D100, EMS-D120 or the

FlightDEK-D180.  We are considering one or more of

these units for our panel on our panel and would like

real world feedback.

Thanks for any information.



Dennis Thomas



Do Not Archive

- The Matronics RV9-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV9-List

jc(at)INFONET.COM.BR
Guest

Posted: Thu Mar 22, 2007 12:03 am Post subject: Dynaon Avionics

Hello Dennis:

In my first RV-9A, I’ve installed a Dynon D10-A. Excellent. It was very beautiful and

efficient. I could read the info very easily in spite off some info about these difficult.

The only claim was about the procedure to calibrate magnetic compass and the way we see

vertical speed, by numbers not by bar graph. 

Now I’m building my second RV-9A with EFIS-D-100 and another EMS-D-120. The choice was

made by price and the connectivity between both of them. I understand it as a redundancy

in my panel. Even then there are only one sensor for each engine parameter, the most

important in an emergency will be the info from D-100 and we have two screens for the same

sensors. It is very simple to install and maintenance free. 

About the GPS connectivity it could be better like the other ones (GRT, Blue Mountain…),

but the price convinced me.

Go for it. You won’t regret.  

JC – Aracaju - Brasil

-- 

JC - Aracaju

Citando dthomas773(at)sbcglobal.net:



 	  Quote: 	
		   

 

 Big Question.  Does anyone have personal experiance,

 good or bad with the Dynon EFIS-D100, EMS-D120 or the

 FlightDEK-D180.  We are considering one or more of

 these units for our panel on our panel and would like

 real world feedback.

 Thanks for any information.

 

 Dennis Thomas

 

 Do Not Archive

- The Matronics RV9-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV9-List

dthomas773(at)sbcglobal.n
Guest

Posted: Thu Mar 22, 2007 7:57 am Post subject: Dynaon Avionics

Hi JC,

Thanks for the input.  I have an RV-9 and it has a

very simple VFI panel using mostly the cheap gauges

from Van's.  I'm helping a freind build an RV-7A and

were looing at panel time.

In my airplane I don't have any kind of attitude

indicator and I could install a D10A for just a few

dollars more that a Ray Allen electric attitude

indicator.

Dennis

--- João   Carlos Martins de Medeiros

<jc(at)INFONET.COM.BR> wrote:

 	  Quote: 	

 "=?ISO-8859-1?B?Sm/jbw==?=   Carlos Martins de

 Medeiros" <jc(at)infonet.com.br>

 Hello Dennis:

 In my first RV-9A, I’ve installed a Dynon D10-A.

 Excellent. It was very beautiful and

 efficient. I could read the info very easily in

 spite off some info about these difficult.

 The only claim was about the procedure to calibrate

 magnetic compass and the way we see

 vertical speed, by numbers not by bar graph. 

 Now I’m building my second RV-9A with EFIS-D-100 and

 another EMS-D-120. The choice was

 made by price and the connectivity between both of

 them. I understand it as a redundancy

 in my panel. Even then there are only one sensor for

 each engine parameter, the most

 important in an emergency will be the info from

 D-100 and we have two screens for the same

 sensors. It is very simple to install and

 maintenance free. 

 About the GPS connectivity it could be better like

 the other ones (GRT, Blue Mountain…),

 but the price convinced me.

 Go for it. You won’t regret.  

 JC – Aracaju - Brasil

 -- 

 JC - Aracaju

 Citando dthomas773(at)sbcglobal.net:

 > 

 <dthomas773(at)sbcglobal.net>

 > 

 > Big Question.  Does anyone have personal

 experiance,

 > good or bad with the Dynon EFIS-D100, EMS-D120 or

 the

 > FlightDEK-D180.  We are considering one or more of

 > these units for our panel on our panel and would

 like

 > real world feedback.

 > Thanks for any information.

 > 

 > Dennis Thomas

 > 

 > Do Not Archive

 > 

 > 

 > 

 > 

 > 

 browse

 Subscriptions page,

 FAQ,

 http://www.matronics.com/Navigator?RV9-List

 Web Forums!

- The Matronics RV9-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV9-List

trigo(at)mail.telepac.pt
Guest

Posted: Thu Mar 22, 2007 8:33 am Post subject: Dynaon Avionics

Olá  JC



Já está construindo outro??



Carlos

---

- The Matronics RV9-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV9-List

yenduc(at)sbcglobal.net
Guest

Posted: Thu Mar 22, 2007 10:10 am Post subject: Dynaon Avionics

Dennis:



I have the 100 and 120.  I am in the process of finishing the hook  

ups..  So far everything works and I am pleased.  It will be several  

months before I'll be able to fly with them.  I was missing a small  

part (that I probably just lost) from the manifold pressure sensor.   

I called Dynon and they had it to me three days later -- no charge.   

Stein did my panel.  You can see it at:  http://www.steinair.com/ 

images/store/cudney.jpg



good luck



dave

On Mar 21, 2007, at 7:18 PM, <dthomas773(at)sbcglobal.net> wrote:



 	  Quote: 	
		   



 Big Question.  Does anyone have personal experiance,

 good or bad with the Dynon EFIS-D100, EMS-D120 or the

 FlightDEK-D180.  We are considering one or more of

 these units for our panel on our panel and would like

 real world feedback.

 Thanks for any information.



 Dennis Thomas



 Do Not Archive

- The Matronics RV9-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV9-List

bill(at)repucci.com
Guest

Posted: Thu Mar 22, 2007 2:59 pm Post subject: Dynaon Avionics

JC,



I'm just about finished with my -9 and have installed a D100 EFIS and

D10 EMS.  The ability to connect the two units sold me as I wanted an

EFIS display on the right side.



Everything seems to work fine and the connections were easy to do.



There are pictures on this page

(http://www.repucci.com/bill/instruments.html) of my web site.  Scroll

down to see pictures of the finished panel.



Bill



--

- The Matronics RV9-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV9-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV9-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum