Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Search found 10 matches
Matronics Email Lists Forum Index
Author Message
  Topic: z13 battery bus protection
mmcelrea

Replies: 17
Views: 13408

PostForum: AeroElectric-List   Posted: Tue Apr 17, 2018 10:29 pm   Subject: Re: z13 battery bus protection
Bob, thankyou for your reply, much appreciated.
Miller
  Topic: z13 battery bus protection
mmcelrea

Replies: 17
Views: 13408

PostForum: AeroElectric-List   Posted: Tue Apr 17, 2018 6:55 am   Subject: Re: z13 battery bus protection
Will a maxifuse not blow as fast as a normal blade fuse? Is a slow blow blade fuse available?

The endurance bus feed wire from the hot battery bus is protected by a fuse at
one end and a fuselink ...
  Topic: z13 battery bus protection
mmcelrea

Replies: 17
Views: 13408

PostForum: AeroElectric-List   Posted: Mon Apr 16, 2018 8:58 pm   Subject: Re: z13 battery bus protection
In that case could a fuse link be used on the source end of the wire to protect the wire and then feeding the bus via one of the fast on rather than the main bolt terminal to provide fast blow protect ...
  Topic: z13 battery bus protection
mmcelrea

Replies: 17
Views: 13408

PostForum: AeroElectric-List   Posted: Sun Apr 15, 2018 11:19 pm   Subject: Re: z13 battery bus protection
Hi.
I have no intention of messing with cb’s or fuses in flight. The fuse blocks are mounted on a drop down panel between the main and sub panels. I don’t want to mount the battery bus on the fi ...
  Topic: z13 battery bus protection
mmcelrea

Replies: 17
Views: 13408

PostForum: AeroElectric-List   Posted: Sun Apr 15, 2018 12:59 pm   Subject: z13 battery bus protection
Hi.
On the Z13 design the wire from the contactor to the battery bus is recommended to be 6" or less. I don't want to put the battery bus on the fwf but on a panel with the other fuseblocks whi ...
  Topic: Z-13/8 inquiry
mmcelrea

Replies: 12
Views: 12477

PostForum: AeroElectric-List   Posted: Fri Feb 23, 2018 7:03 pm   Subject: Re: Z-13/8 inquiry
Why is there no protection on the feed wire to the main bus from the battery contactor? Assuming the contactor is on the firewall fwd and the main bus is on a sub panel in front of the main panel it†...
  Topic: z13/8 ess bus feed
mmcelrea

Replies: 7
Views: 6511

PostForum: AeroElectric-List   Posted: Fri Nov 24, 2017 12:35 pm   Subject: Re: z13/8 ess bus feed
Is it acceptable to use cb's, fuses or limiters in place of the fuse links from the stby alternator, main bus to master and the alternate essential bus feed? Also is it ok to use 1 amp fuses in place ...
  Topic: z13/8 ess bus feed
mmcelrea

Replies: 7
Views: 6511

PostForum: AeroElectric-List   Posted: Wed Nov 15, 2017 12:50 am   Subject: Re: z13/8 ess bus feed
Is the SD8 on/available during normal flight? If the output is fed through a diode would that prevent the alternators 'competing' or is the voltage set at lower level than the main alternator and moni ...
  Topic: z13/8 ess bus feed
mmcelrea

Replies: 7
Views: 6511

PostForum: AeroElectric-List   Posted: Mon Nov 13, 2017 3:16 am   Subject: Re: z13/8 ess bus feed
Thankyou Bob
I am building the aircraft with approval for IFR flight here in the UK and the LAA are concerned about single failure points. Using the Z13.8 architecture is it possible to monitor if th ...
  Topic: z13/8 ess bus feed
mmcelrea

Replies: 7
Views: 6511

PostForum: AeroElectric-List   Posted: Sat Nov 11, 2017 3:49 pm   Subject: z13/8 ess bus feed
Hi. Building an RV7 in the UK with a G3X system and thinking of using the z13/8 architecture with the SD8 backup alt and GAD27 to maintain voltage to the GDU etc during engine start. Is it normal or a ...
 
Page 1 of 1
All times are GMT - 8 Hours
Jump to:  


Powered by phpBB © 2001, 2005 phpBB Group