Matronics Email Lists

Just wanted to share this to see if it might be useful for anyone else. I'm in the process of designing my instrument panels for my Europa XS tri-gear. I bought aluminium panels from Europa as a mod k ...

That is good news, Thank you for your responses.
Alan

I have bought a used Rotax 912uls that has the skydrive carb heat kit installed. I would assume that in the UK this kit requires a formal modification for the Europa but I can't find one anywhere. Th ...

For Info

https://eamtc.org/?mailpoet_router&endpoint=track&action=click&data=WyI1MzgiLCJmMmEyYTQiLCIxMSIsIjA2ODhiN2EzODI3ZSIsZmFsc2Vd

This is why I love this forum, the combined Europa knowledge on here is irreplaceable and I thank everyone for their input.

The reason I would like to go for the VP-X option is because my GEEK head ...

Thanks I wasn't aware of the need for that. I've not seen a modification for this, is one available or can my inspector sign of this change?

Thanks, I will look at the reduction LED lights make.

I'm looking to put in the rotax 912uls with a 60Amp alternator. I'm using the Vertical Power planner to calculate the total current requirement based on that setup, so far I am under 40Amps. The big h ...

I'm going to send this to my inspector but I would be grateful of any comments on the attached prior to this. Does this look reasonable as an avionics installation for a Europa? there will be a standb ...

I'm thinking of installing in the VP-X Pro vertical power system and the new associated Primary Power System. In the UK would this be considered a modification or is this builders choice like the type ...

Hi, I'm about to fix my cockpit module to the fuz but one last job i need to attache the cow bell to the cockpit module. My wings are in storage in it quite a logistical task to get them and therefore ...

I seem to be stumbling from one problem to another at the minute. Maybe it's my inexperience!

Whilst waiting for an answer on my Tailplane Torque tube issue I though I would complete the quick buil ...

Hi Phil,

Yes I have the issue 2 TP38s and I need the issue 1 and there is one other builder that has contacted me who has the same problem.

The following information was provided by Europa.
Is ...

Response from Europa is that I have the issue 2 TP38s but need issue 1TP38s which are Slightly longer.

Alan

Steve, that is great news many thanks

Alan

Thanks Nigel,

I'ts disappointing and worrisome that they are going to shut the site down completely at some point but don't give any indication when.

Many thanks

Alan

Further to the above, I'm now at the stage of fitting the tailplane torque tube but contrary to my first post it appears the new pre-drilled black bushes are too short giving a total of nearly 12mm of ...

Does anyone know if the europaowners.org web site is still open to post build pictures? I've registered on the site but I can't find a link to create a new build.

Many thanks

Alan

Alan,

The roll pins attach the shoot bolt to the link rod, my problem was at the other end, however problem solved. I bought the kit partially built and the previous builder had coated the handles ...

I've started to put together my door latches and drawings indicate the shoot bolt push rods are connected to the operating handle with AN525-10R8 screws with a AN960-10 and a AN960-10L washers under ...